Ubiquiti UniFi U6 Mesh Pro
Installation Guide
This document outlines the installation process for the Ubiquiti UniFi U6 Mesh Pro access point.
Included Components:
-
a
1x U6 Mesh Pro -
b
1x Mounting Bracket -
c
1x Pole Mount Bracket -
d
2x M8 Screws -
e
4x M8 Screws -
f
4x M8 Washers -
g
4x M8 Nuts -
h
4x M8 Screws -
i
4x M4 Screws -
j
4x M4 Screws -
k
1x Ethernet Cable
Mounting Options:
The U6 Mesh Pro can be mounted in two primary ways:
Option 1: Pole Mounting
Attach the device to a pole using the provided mounting bracket and screws. The Ethernet cable connects to the device.
Option 2: Wall Mounting
Attach the device to a wall using the provided mounting bracket and screws. The Ethernet cable connects to the device.
For detailed setup and configuration, please refer to the full UniFi Network application documentation.