Oster® Pro Series Blender with High Performance Motor

Welcome

Congratulations on your new Oster® Pro Series Blender. Your Oster® blender will allow you to create delicious smoothies, milkshakes, salsas and much more at the touch of a button! If you have any comments, questions or inquiries about this product, please call 1-800-334-0759.

Features and Benefits:

• Intuitive touchscreen display for a modern take on traditional blending
• 4 Auto Programs for Smoothies, Milkshakes, Frozen Drinks, and Salsas
• Select models have a 5th auto program for Self Clean
• Manual modes for low, medium, high, and pulse functionality
• 9-Cup XL Tritan jar - dishwasher safe & BPA free
• 3-Inch, 6-point Stainless Steel blade
• Dual direction blade technology reduces food jamming
• Tamper tool accessory to assist in blending tough ingredients
• Select models include food processor, blend-n-go cup, and mini jar accessories
• 3-year satisfaction guarantee

For best results, carefully read the instruction manual before using this appliance.

Learning About the Oster Pro Series with High Performance Motor

This section details the components of your Oster® Pro Series Blender.

Jar Assembly and Operation

9-Cup XL Tritan Jar Assembly:

1. Place the agitator (blade) assembly onto the threaded jar bottom.
2. Place the locking sealing ring on top of the blade assembly. Ensure the locking tabs fit snugly into the groove at the bottom of the jar bottom.
3. Install the jar nut, seal, and blade assembly onto the jar.
4. Put the ingredients into the jar.
5. Secure the lid and filler cap.
6. Place the jar onto the base.
7. Plug the power cord into a standard household 120/127-volt, 60 hz. AC outlet.

WARNING: ALWAYS PLACE HAND ON CONTAINER COVER WHILE OPERATING BLENDER.

Using the Touchscreen Controls:

1. Plug in the blender. Press and hold the Power button (⚡) for one second to turn the blender on. The power light will indicate the blender is active.
2. Select a setting and blend ingredients to desired consistency. The control panel lists functions and desired outcomes.
3. Press the Power Button (⚡) to stop and turn off the blender.
4. Hold and release the Pulse button (?) for ice crushing and chopping. Repeat as needed.

Using the Pre-Programmed Settings:

1. Press and hold the Power button (⚡) for one second to turn the blender on. The power light will illuminate, indicating the blender is active and ready to use.
2. Select one of the Auto Program settings: Smoothie (?), Milkshake (?), Frozen Drink (❄️), Salsa (?️), or Auto Clean (?).
3. To change your selection or stop the blender, select the same function twice. For example, to stop the Smoothie function, select the Smoothie button again.
4. Once a program is complete, the blender will automatically stop.
5. Press and hold the Power button (⚡) for one second to turn off the blender. The blender is pre-programmed to turn off automatically if not used for several minutes. All lights will turn off when the unit powers down.

Using the Manual Controls:

The Manual Controls include: LOW (?), MEDIUM (?), HIGH (⬆️), PULSE (?).

Use these controls for personal recipes or to continue blending after a programmed setting is finished.

1. Press and hold the Power button (⚡) for one second to turn on the blender. The power light shines bright.
2. Put the ingredients into the jar.
3. Secure the lid and the filler cap.

Pressing any speed setting will interrupt the active function. For example, if the blender is running on "LOW", pressing "HIGH" will change the speed to "HIGH". Pressing "LOW" a second time will return the blender to the active and ready-to-use screen (flashing power button).

Accessories

Blend-N-Go® Smoothie Cup Accessory (Select Models Only)

This accessory allows you to blend directly into a portable cup.

Using your Blend-N-Go® cup:

1. Before washing, ensure the blender is off and unplugged. Wash all components except the blender base with soapy water using a soft sponge and bottle brush. Do not use abrasive cleansers or sponges. Rinse well and dry. Parts are also dishwasher safe. Do not blend hot liquids.
2. Place desired ingredients into the smoothie cup according to the following order: Liquids, fresh ingredients, frozen fruit, ice, yogurt, and ice cream. Cut all firm fruits, vegetables, and other foods into pieces no larger than 1/2-inch (1.25 cm) by 2 inches (5.0 cm).
3. Place the Blade into the Threaded Jar Bottom or adapter.
4. Place the sealing ring over the blade assembly. Carefully press and tuck the sealing ring into the locking groove.
5. Place the blade assembly into the cup.
6. Ensure the Integrated Blade Assembly is tightened to the jar before using.
7. Place the cup assembly onto the Blender base.
8. Hold the cup in position. Operate the Blender according to the instructions in your Blender User Manual. Blend until desired consistency.
9. Place the lid on the cup and turn clockwise to tighten.
10. Enjoy your blended drink!

Blend-N-Go® Mini Jar Accessory (Select Models Only)

This accessory is for smaller blending tasks.

Food Processor Accessory (Select Models Only)

This accessory transforms your blender into a food processor for chopping and slicing tasks.

Assembling and Using Your Food Processor:

1. Before assembly, ensure the Adaptor is operating correctly. Unplug the Motor Base during assembly.
2. Place the Adaptor in the bowl and turn counterclockwise to lock.
3. Place the Bowl with Adaptor on the Motor Base.

Chop or Mince:

1. Hold the S Blade by the plastic Center Hub and place it over the post of the Bowl. CAUTION: Blade is very sharp, handle carefully. Rotate the S Blade to ensure it is seated on the post. Always place the S blade in the Food Processor before adding ingredients.
2. Place food in the Processing Bowl. Food to be processed should always be cut into 1-inch (2.5 cm) pieces.
3. Using alignment marks on the lid, place the cover on the bowl and press down firmly while turning counterclockwise to lock. DO NOT OPERATE UNIT UNLESS COMPLETELY ASSEMBLED.

Before Using for the First Time: After unpacking, disassemble the unit. Wash all parts (except Adaptor) in warm, soapy water. Rinse and dry immediately. CAUTION: DO NOT IMMERSE ADAPTOR IN ANY LIQUID.

7. Turn the unit "ON." (Select Pulse, Low, or Medium speed setting on the Motor Base.)

ALWAYS HOLD FOOD PROCESSOR FIRMLY WITH ONE HAND WHEN STARTING UNIT AND WHEN PROCESSING. Process until desired results are achieved by running the unit continuously or using Fast Pulsing. Fast Pulsing is the technique used to control the size of the food being processed. Press and release the Pulse button very quickly. Refer to the Processing Chart for proper techniques and end results.

Note: Only the "Salsa" auto program setting is functional when the Food Processor is attached.

Slice or Shred:

1. Place the Blade Shaft over the post. Place the Slicing/Shredding Disk over the Blade Shaft with the blade of your choice facing up. CAUTION: Blade is very sharp, handle carefully.
2. Using alignment marks on the lid, place the cover on the bowl and press down firmly while turning counterclockwise to lock.
3. Load the feed tube with ingredients before turning the Food Processor "ON".
4. Rest the Food Pusher in the feed tube. Turn unit "ON" (Select medium speed setting). While holding the Food Pusher with one hand and the feed tube in the other, push gently down on the Food Pusher. Always use the Food Pusher to yield more evenly sliced or shredded foods. NEVER USE YOUR FINGERS. When finished, turn the unit "OFF".

Note: Medium - High Manual settings are recommended for slicing and shredding.

Cleaning and Maintenance

How To Disassemble:

1. Turn unit "OFF" and unplug Motor Base.
2. Always wait for the S Blade or Slicing/Shredding Disk to stop spinning.
3. Remove Food Processor Accessory from Motor Base.
4. Turn Cover clockwise to remove from Bowl.
5. Remove S Blade or Disk carefully. Be careful not to let the Blade or Disk fall out of the container. The cutting edges are very sharp. Scrape any remaining food from the Blade and Processing Bowl.
6. Unlock Bowl from Adaptor by turning Bowl clockwise.

Cleaning:

Unplug Motor Base Before Cleaning.

WARNING: Do Not Immerse Adaptor in Water. Always Remove Adaptor from processor Bowl before cleaning.

WARNING: Keep S Blade and Disk out of the reach of children. Store the S Blade and Disk in the Bowl or in a convenient, safe location when not in use. This Blade and Disk should be treated with the same caution as a sharp knife.

Remove stains caused by processing large amounts of carrots or similar vegetables with baking soda. Rinse stained parts in water and sprinkle with baking soda. Rub with a soft, damp cloth. Rinse and dry. Do not use abrasive cleaners on any parts.

Maintenance:

This unit is designed with a safety interlock. The interlock requires that the Cover be in place before the blade will rotate. (The interlock does not control operation of the Motor.) To ensure that the interlock is operating correctly, hold the Adaptor and rotate the Drive Shaft several turns. The metal Star Drive on the bottom of the Adaptor should NOT turn. If it does turn, DO NOT USE.

Return the unit to an authorized service facility for repair. DO NOT USE THE INTERLOCK FEATURE AS A SUBSTITUTE for turning the power unit "OFF" and unplugging the power unit before disassembling and cleaning. Never put S Blade on Adaptor without Processor Bowl. Do not operate if the flexible seal is damaged or missing. The safety interlock could become jammed.

Processing Tips:

1. Cut all fruits and vegetables, cooked meats, fish, seafoods, and cheeses into pieces 1 inch or smaller.
2. Always hold hand firmly on the Cover when starting and running Motor.
3. Do not process hot liquids or frozen foods.
4. Do not process whole spices (except peppercorns) such as nutmeg or cinnamon. They may cause damage to the surface of the Processor Bowl.
5. Process the hardest foods first, using only a few Fast Pulses to begin chopping. Add more delicate foods and continue to process using the Fast Pulse technique. The harder foods will continue to be chopped along with the softer foods.
6. Processing of Parmesan cheese, dried dates, or other extremely hard foods is not recommended. If a knife cannot easily pierce the food, it should NOT be processed in the Food Processor Accessory.
7. The Food Processor Accessory is not designed to whip cream, whip egg whites, or process dough. Use a standard mixer for those tasks.
8. If liquid leaks from the Cover, there is too much liquid in the recipe. Adjust the liquid level to prevent leakage.
9. The temperature of cheese will affect how it processes. Cheese for spreads should be at room temperature for a smooth, creamy texture. "Grated" cheese should be refrigerator cold.
10. Large, harder pieces of food can be processed with several Fast Pulses to coarsely chop. Then process continuously for a fine texture.

Only the "Food Chop/Salsa" Pre-Programmed setting is functional when the Food processor is attached.

To Convert a Recipe:

1. Total the amount of dry and liquid ingredients. If the total exceeds 5 cups, decide if the recipe can be made easily in batches. Do not attempt to process large recipes.
2. If the total is under 1 cup (250 ml), process dry ingredients or the most finely chopped foods first.
3. Then add remaining ingredients and combine with several Fast Pulses to mix together.

Warranty Information

3 YEAR SATISFACTION GUARANTEE

Sunbeam Products, Inc. or if in Canada, Newell Brands Canada ULC (collectively "Sunbeam") warrants that for a period of three years from the date of purchase, this product (and ten years for the included All Metal Drive) will be free from defects in material and workmanship. Sunbeam Products, Inc., at its option, will repair or replace, free of charge, this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component at no cost to the consumer. If the product is no longer available, replacement may be made with a similar product of equal or greater value.

This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Sunbeam Products, Inc. reserves all rights to decline coverage if the defect or damage was caused by unauthorized components or service. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Dealers, service centers, or retail stores selling Sunbeam Products, Inc. products do not have the right to alter, modify, or in any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than Sunbeam Products, Inc. or an authorized Sunbeam Products, Inc. service center. Sunbeam Products, Inc. expressly excludes from this warranty and denies liability for defects or damage caused by repair or alteration by anyone other than Sunbeam Products, Inc. or an authorized Sunbeam Products, Inc. service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes, and tornadoes.

No terms of this warranty may be construed to apply to non-warranty service and maintenance. Accordingly, Sunbeam Products, Inc. also denies liability for defects and damage caused by repair or alteration outside the terms of this warranty.

What are the limits on Sunbeam' Liability?

Sunbeam shall not be liable for any incidental or consequential damages caused by the breach of any express, implied, or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above limited warranty. Sunbeam disclaims all other warranties, conditions, or representations, express, implied, statutory, or otherwise. Sunbeam shall not be liable for any damages of any kind resulting from the purchase, use, or misuse of, or inability to use the product including incidental, special, consequential, or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This limited warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state, or jurisdiction to jurisdiction.

How to Obtain Satisfaction Guarantee and/or Limited Warranty Service

In the U.S.A.: If you have any question regarding this guarantee or limited warranty or would like to obtain guarantee or limited warranty service, please call 1-800-334-0759 and a convenient service center address will be provided to you.

In Canada: If you have any question regarding this guarantee or limited warranty or would like to obtain guarantee or limited warranty service, please call 1-800-667-8623 and a convenient service center address will be provided to you.

In the U.S.A., this guarantee and limited warranty is offered by Sunbeam Products, Inc. located in Boca Raton, Florida 33431. In Canada, this guarantee and limited warranty is offered by Newell Brands Canada ULC, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write to the Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.

Contact Information

For product questions contact: Sunbeam Consumer Service

USA: 1.800.334.0759

Canada: 1.800.667.8623

www.oster.com

©2022 Sunbeam Products, Inc. All rights reserved.

In the U.S., distributed by Sunbeam, Products, Inc., Boca Raton, FL 33431

In Canada, imported and distributed by Newell Brands Canada ULC, Brampton (Ontario) L6Y 0M1.

Tritan™ is a trademark of Eastman Chemical company used with permission.

Printed in Mexico.