VIVOSUN Grow Tent Standard Series User Manual

Products Included in this Manual

Key Features

1. Light-Blocking & Highly Reflective Tent Coat: Professional tent coat design with 600D Oxford Nylon exterior and highly reflective Mylar interior.
2. Ducting Openings: Multiple ducting openings with adjustable size suitable for different sizes of ductings with no leak of light.
3. Viewing Window: A large transparent window with an optional flap cover offers a clear view of the interior of the tent.
4. Heavy-Duty Frame: Thick metal poles and connectors provide a sturdy structure. Note: All devices must be evenly distributed on the ceiling bars.
5. Water-Proof Floor Tray: The water-proof floor tray can hold water, soil and other debris, preventing leakage.
6. Wire Opening: Double-covered wire opening for more convenient connection to the external controller.
7. Triangular Plate: Triangle stiffener increases tent strength.

Contents

• Key Features
• Product Contents
• Specifications
• Installation
• Equipment Setup
• Complete Your Setup
• Warranty

Product Contents

VST-S224/S276/S336/G336

Frame Poles & Ceiling Bars:

• A: 8 pcs.
• B: 4 pcs.
• C: 4 pcs.
• E: 1 pc.
• F: 1 pc.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

VST-S448/S558/G448/G558

Frame Poles & Ceiling Bars:

• A: 8 pcs.
• B: 4 pcs.
• C: 4 pcs.
• E: 1 pc.
• F: 2 pcs.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

VST-S326/S425/G425

Frame Poles & Ceiling Bars:

• A: 4 pcs.
• B: 4 pcs.
• C: 4 pcs.
• D: 4 pcs.
• E: 1 pc.
• F: 1 pc.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

VST-S538

Frame Poles & Ceiling Bars:

• A: 4 pcs.
• B: 4 pcs.
• C: 4 pcs.
• D: 4 pcs.
• E: 1 pc.
• F: 2 pcs.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

VST-S223

Frame Poles & Ceiling Bars:

• A: 8 pcs.
• B: 4 pcs.
• E: 1 pc.
• F: 1 pc.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

VST-S3018

Frame Poles & Ceiling Bars:

• A: 4 pcs.
• B: 4 pcs.
• D: 4 pcs.
• E: 1 pc.
• F: 1 pc.

Components:

• 1. Tent Coat, 1 pc.
• 2. Floor Tray, 1 pc.
• 3. Filter Straps, 2 pcs.
• 4. Corner Supports, 8 pcs.

Specifications

VST-S224, VST-S276, VST-S336

VST-S448, VST-S558, VST-S326

VST-S425, VST-S538, VST-S223

VST-S3018, VST-G425, VST-G336

VST-G448, VST-G558

Installation

VST-S224/S276/S336/S448/S558/G336/G448/G558

STEP 1: Connect four (A) Poles to four Corner Supports (4) to form the base frame of the tent.

STEP 2: Connect four (B) Poles to the Corner Supports (4) of the tent base.

STEP 3: Connect four (C) Poles to the (B) Poles.

STEP 4: Mount the other four Corner Supports (4) to the (C) Poles as shown.

STEP 5: Connect the other four (A) Poles to the Corner Supports (4) to form the top frame of the tent.

STEP 6: Unzip and unfold the Tent Coat (1) and put the base frame in the bottom of the Tent Coat.

STEP 7: Pull up the tent roof and cover the top of the frame.

STEP 8: Place the Ceiling Bars (E, F) on the top frame for hanging devices like lights and ventilation. For the VST-S(G)448/S(G)558, use two (F) Ceiling Bars and one (E) Ceiling Bar.

STEP 9: Place the Floor Tray (2) into the tent.

STEP 10: Pull the zippers to close the tent walls and door. Make sure the tent coat fits the frame at the corners. The VST-S(G)448/S(G)558 has additional side doors.

VST-S326/S425/S538/G425

STEP 1: Connect two (A) Poles and two (D) Poles to four Corner Supports (4) to form the base frame of the tent.

STEP 2: Connect four (B) Poles to the Corner Supports (4) of the tent base.

STEP 3: Connect four (C) Poles to the (B) Poles.

STEP 4: Attach the other four Corner Supports (4) to the (C) Poles as shown.

STEP 5: Connect two (A) Poles and two (D) Poles to the Corner Supports (4) to form the top frame of the tent.

STEP 6: Unzip and unfold the Tent Coat (1) and put the base frame in the bottom of the Tent Coat.

STEP 7: Pull up the tent roof and cover the top of the frame.

STEP 8: Place the Ceiling Bars (E, F) on the top frame for hanging devices like lights and ventilation. For the VST-S538, use two (F) Ceiling Bars and one (E) Ceiling Bar.

STEP 9: Place the Floor Tray (2) into the tent.

STEP 10: Pull the zippers to close the tent walls and door. Make sure the tent coat fits the frame at the corners.

VST-S223/S3018

STEP 1: Connect four (A) Poles to four Corner Supports (4) to form the base frame of the tent. For the VST-S3018, connect two (A) Poles and two (B) Poles to four Corner Supports (4).

STEP 2: Connect four (B) Poles to the Corner Supports (4) of the tent base. For VST-S3018, connect four (D) Poles to the Corner Supports (4).

STEP 3: Attach the other four Corner Supports (4) to the (B) Poles or (D) Poles as shown.

STEP 4: Connect the other four (A) Poles to the Corner Supports (4) to form the top frame of the tent. For the VST-S3018, connect two (A) Poles and two (B) Poles as shown.

STEP 5: Unzip and unfold the Tent Coat (1) and put the base frame in the bottom of the Tent Coat.

STEP 6: Pull up the tent roof and cover the top frame.

STEP 7: Place the Ceiling Bars (E, F) on the top frame for hanging devices.

STEP 8: Place the Floor Tray (2) into the tent.

STEP 9: Pull the zippers to close the tent walls and door. Make sure the tent coat fits the frame at the corners.

Equipment Setup

Grow Tent Ventilation

The grow tent has multiple ducting openings and intake holes for ventilation.

Ducting Opening: Install the required ducting onto a suitably sized ducting opening. Utilize the cinches located on both sides of the opening to firmly secure the ducting onto the tent.

Intake Air Vent: Facilitates the influx of fresh air into the tent.

Inline Fan Applications

The Inline fan can be used as an exhaust fan or an intake fan.

Exhaust Fan: Hung or mounted on the highest opposite corner of the Intake Fan inside your grow tent. Airflow arrow points away from your grow tent.

Intake Fan: Mounted at a bottom corner outside of your grow tent. Airflow arrow points toward your grow tent.

Standard Setup

Inline Fan & Carbon Filter: Choose an appropriate inline fan suitable for your grow tent. Hang the inline fan on the ceiling bar of the tent and connect with ductings on the air outlet side of the fan. Install a carbon filter on the air inlet side of the tent and hang with straps (provided with tent).

Grow Light: Choose an appropriate grow light for your tent. Install the grow light with rope hangers after installing the inline fan and carbon filter. Adjust the light to an appropriate height.

Complete Your Setup

LED Grow Light

• 100W-645W high-powered LED grow light
• High PPE efficacy with Samsung LED
• Full spectrum including FR/UV
• 0-100% dimming with daisy-chain capability
• ETL/CE/FCC certified
• Compatible with GrowHub controller

Controller

• WiFi remote control with VIVOSUN App
• Complete control of lights, inline fans and circulation fans
• Temp./Humidity monitoring and control
• Compatible with VIVOSUN devices such as AeroLight, AeroZesh, VS series lights
• Professional controller designed for growers of all levels

Inline Duct Fan

• Efficient airflow with high static pressure
• 4'' / 6'' / 8'' for different sized tents
• Energy efficient and quiet EC motor
• Dual ball bearings with long lifespan
• Precise fan speed adjustment by PWM
• Compatible with GrowHub controller for multiple professional operation modes

Carbon Filter

• Eliminates odors and refreshes air
• Premium-grade Australian charcoal
• High absorption efficiency and long lifespan
• 4'' /6'' /8'' compatible with different inline fans

Clip-On Circulation Fan

• Patented clip-on design
• Automatic oscillation
• Adjustable fan speed
• High airflow and energy efficient
• Compatible with GrowHub controller (E Series)

Irrigation System

• Automated drip irrigation system
• Professional irrigation settings
• Precise and stable irrigation
• Quiet and efficient
• Easy to install

Grow Bag

• Various sizes ranging from 1-30 gallons
• 300G durable nonwoven fabric
• Root breathable and air pruning

DWC Hydroponic System

• DWC+Top Dripping hydroponic system
• Efficient air-driven top dripping technology
• One or four 5-gallon bucket(s)
• Suitable from seedling to harvest
• Easy to install and automated operation

Propagation Tray & Heat Mat

• Propagation tray and heat mat kit
• Transparent dome with humidity adjustment
• Heat mat with precise temperature control
• Easy and safe to use

Warranty

VIVOSUN provides a one-year warranty against defects on all grow tents purchased directly from us or through our authorized dealers. This policy serves as our commitment to promptly address any manufacturing defects or premature breakage that may occur during normal use of our products.

Our warranty covers the replacement or refund of purchases that exhibit material defects within one year of the original purchase date. In such events, customers may contact us to initiate the claim process. We will need proof of purchase to verify coverage eligibility.

This policy does not extend to products that have been misused, abused, or purposefully damaged. It also does not cover normal wear and tear or cosmetic defects such as minor scratches.

Customers can rest assured knowing that our products undergo rigorous quality testing procedures. This one-year warranty reflects our confidence in the durability of our products under normal use.

If any product defects are found, customers are encouraged to contact us immediately. Your satisfaction is our priority, and we are committed to resolving any issues in a professional and timely manner.