ProtoArc Flexer Mesh Ergonomic Office Chair Instruction Manual

1. Enkonduko

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your ProtoArc Flexer Mesh Ergonomic Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your chair.

2. Instalado kaj Asembleo

The ProtoArc Flexer chair is designed for easy assembly. Follow these steps carefully to set up your chair.

2.1 Unboxing and Parts Identification

Carefully remove all components from the packaging. Verify that all parts are present according to the included parts list. The assembly process typically takes about 10 minutes.

2.2 Installing the Five-Star Base

Assemble the five-star base by connecting the legs and securing them. Then, insert the casters into each leg and the gas lift cylinder into the center of the base.

Bilda Priskribo: A visual guide illustrating the steps to assemble the chair's five-star base, including attaching the legs and inserting the gas lift.

2.3 Attaching the Armrests

Secure the armrests to the seat cushion using the provided hardware. Ensure they are firmly attached.

2.4 Installing the Seat Cushion and Backrest

Attach the backrest to the seat cushion assembly. Once the backrest and armrests are secured to the seat cushion, carefully place the entire upper assembly onto the gas lift cylinder on the five-star base.

3. Funkciigado kaj Alĝustigoj

Your ProtoArc Flexer chair offers multiple adjustment options to customize your seating experience for optimal comfort and ergonomic support.

3.1 Alteco de Seĝo-Alĝustigo

To adjust the seat height, pull the lever located under the right side of the seat upwards. While standing, the seat will rise. While seated, apply pressure to lower the seat. Release the lever at your desired height.

3.2 Alĝustigo de Profundo de Sidejo

The unique sliding seat mechanism allows you to adjust the seat depth by up to 1.6 inches. Locate the lever under the left side of the seat. Pull the lever and slide the seat forward or backward to find your preferred leg support, ensuring no pressure behind your knees. Release the lever to lock the position.

Bilda Priskribo: Deproksima plano view of the seat depth adjustment lever and the sliding seat mechanism, demonstrating how to extend or retract the seat.

3.3 Armrest Height Adjustment

The armrests are adjustable in height (3.9-inch range). Press the button on the side of each armrest and move it up or down to your desired height. Release the button to lock.

3.4 Backrest Recline and Tilt Lock

The chair features a smooth 95°–125° recline with an auto-sync mechanism. To recline, lean back. To lock the tilt at a specific angle (95° for work, 110° for reading, 125° for relaxation), use the lever on the left side of the chair. Pull the lever out to unlock and push it in to lock.

Bilda Priskribo: A visual representation of the chair's recline functionality, showing different angles for various activities like working, reading, and relaxing.

4. Prizorgado

Regular maintenance ensures the longevity and optimal performance of your ProtoArc Flexer chair.

4.1 Cleaning the Mesh Backrest

The Flexer chair features a breathable Wintex mesh backrest that is designed to be easy to clean. For spills or stains, simply wipe with a damp cloth or rinse with water. Avoid harsh chemicals that may damage the mesh material.

Bilda Priskribo: Vida ekzample of the chair's mesh backrest being cleaned with water, highlighting its waterproof and stain-resistant qualities.

4.2 Seat Cushion Care

The high-density foam seat cushion is wrapped in OEKO-TEX certified fabric. The seat cover is washable. Remove the cover and follow the washing instructions on the label. The plastic+steel shell prevents moisture buildup, contributing to the cushion's freshness over time.

4.3 Caster Maintenance

The chair is equipped with hair-proof casters designed to prevent hair and debris from getting tangled. Periodically check the casters and remove any accumulated dust or hair to ensure smooth and silent gliding.

Bilda Priskribo: A side-by-side comparison illustrating the effectiveness of hair-free casters against traditional casters that accumulate hair, emphasizing ease of maintenance.

5. Respondecaj problemoj

If you encounter any issues with your ProtoArc Flexer chair, refer to the following common troubleshooting tips:

• Seĝo-Krietoj: Ensure all screws are tightened. Apply a small amount of silicone lubricant to moving parts if necessary.
• Gaslifto Ne Alĝustiĝas: Check if the gas lift lever is fully engaged or disengaged. If the issue persists, the gas lift cylinder may need replacement.
• Radoj ne ruliĝas glate: Clean any debris from the casters. Ensure they are properly inserted into the base.
• Dorspogilo Ne Kliniĝanta/Ŝlosiĝanta: Verify that the tilt lock mechanism is correctly engaged or disengaged. Check for any obstructions.

For further assistance, please contact ProtoArc customer support.

6. Specifoj

Detailed specifications for the ProtoArc Flexer Mesh Ergonomic Office Chair:

Bilda Priskribo: A comprehensive diagram displaying the various dimensions of the ProtoArc Flexer chair, including seat height range, backrest height, and overall footprint.

7. Garantio kaj Subteno

Your ProtoArc Flexer Mesh Ergonomic Office Chair comes with a 5-jara garantio de la fabrikanto, kovrante difektojn en materialoj kaj metio sub normala uzo.

For warranty claims, technical support, or any questions regarding your product, please visit the official ProtoArc store or contact our customer service team.

Visit the ProtoArc Store