Saooer Solar Charge Controller 40A 12V/24V

1. Enkonduko

Thank you for choosing the Saooer Solar Charge Controller 40A 12V/24V. This intelligent regulator is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar charge controller.

2. Sekurecaj Informoj

Please read all instructions carefully before installation and operation.

• Ensure all connections are correct and secure before applying power.
• Do not attempt to disassemble or repair the controller yourself. Contact qualified personnel for service.
• Instalu la regilon en bone ventolita loko, for de brulemaj materialoj kaj rekta sunlumo.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order.
• The controller is equipped with multiple protection functions including short-circuit protection, open-circuit protection, and reverse polarity protection. However, incorrect wiring can still cause damage.
• Uzu taŭgajn dratdimensiojn por ĉiuj konektoj por eviti trovarmiĝon.

3. Produkto Finitaview

The Saooer Solar Charge Controller (Model CM3024Z) is a compact and efficient device featuring an LCD display for easy monitoring and control. It automatically identifies 12V or 24V system voltages.

Ĉefaj Trajtoj:

• Automatic identification of 12V/24V system voltage.
• Built-in industrial master chip for precise charge and discharge control.
• Adjustable parameters for customized battery management.
• Comprehensive 3-stagAdministrado de ŝargado de PWM.
• Multiple protection functions: short-circuit, open-circuit, reverse polarity, over-current, overcharge.
• LCD screen with backlight for clear status and data display.
• Double MOS anti-backflow circuit for ultra-low heat generation.

4. Instalado kaj Instalado

Follow these steps for proper installation of your solar charge controller:

1. Preparu por Instalado: Choose a suitable mounting location that is dry, well-ventilated, and protected from direct sunlight and moisture. Ensure there is enough space around the controller for air circulation.
2. Konektu la Baterion: Connect the battery to the controller's battery terminals (marked with '+' and '-'). Ensure correct polarity. The controller will automatically detect the system voltage (12V aŭ 24V).
3. Konektu la Sunan Panelon: Connect the solar panel to the controller's solar panel terminals (marked with 'PV+' and 'PV-'). Ensure correct polarity.
4. Konekti la Ŝarĝon (Laŭvola): Connect your DC load to the controller's load terminals (marked with 'Load+' and 'Load-'). Ensure correct polarity. This allows the controller to manage load discharge and provide low-voltage disconnect protection.
5. Kontrolu Konektojn: Double-check all connections for tightness and correct polarity before powering on the system.

Grava: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order (load, then solar panel, then battery).

5. Funkciaj Instrukcioj

The LCD display provides real-time information about your solar system. Use the buttons below the display to navigate and adjust settings.

Informoj pri LCD-ekrano:

The LCD screen shows various parameters such as battery voltage, charging current, discharge current, accumulated charging amount, and load status. The backlight function improves visibility in low-light conditions.

Butonaj Funkcioj:

• Menubutono: Press to cycle through different display screens and enter parameter setting mode.
• Up/Increase Button: Used to increase values when in parameter setting mode.
• Down/Decrease Button: Used to decrease values when in parameter setting mode.

Refer to the on-screen prompts and the specific icons on the display for detailed interpretation of data and settings.

6. Prizorgado

Regular maintenance ensures the longevity and optimal performance of your solar charge controller.

• Purigado: Periodically clean the controller's exterior with a dry cloth to remove dust and dirt. Do not use liquid cleaners.
• Kontrolo de Konekto: Annually inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
• Ventolado: Ensure that the installation area remains well-ventilated and free from obstructions that could block airflow to the controller's heat sinks.
• Mediaj Kondiĉoj: Verify that the controller is not exposed to extreme temperatures, humidity, or direct water contact.

7. Respondecaj problemoj

If you encounter issues with your Saooer Solar Charge Controller, refer to the following common problems and solutions:

Se la problemo daŭras post provado de ĉi tiuj solvoj, bonvolu kontakti klientan subtenon.

8. Specifoj

9. Garantio kaj Subteno

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

For general inquiries or technical assistance, you may visit the Saooer Store on Amazon.