Enkonduko
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Sekurecaj Informoj
- AVERTO: Risko de elektra ŝoko. Malkonekti la potencon ĉe la fuzeo aŭ ŝaltilo antaŭ instalado aŭ riparado.
- Ĉi tiu produkto devas esti instalita laŭ la aplikebla instala kodo de persono konata kun la konstruado kaj funkciado de la produkto kaj la danĝeroj implikitaj.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Ne konektu al malheligilo.
- Ne rigardu rekte en la LED-lumfonton.
- Certigu, ke ĉiuj konektoj estas sekuraj kaj taŭge izolitaj.
- Funkciiga temperaturintervalo: -20°C ĝis 40°C (-4°F ĝis 104°F).
Enhavo de Pako
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Muntaj Aparatoj (ŝraŭboj, drataj ŝraŭbingoj)
- Instrukcia Manlibro
Produktaj Trajtoj
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Alta Brilo: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Detekto de moviĝo: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Alĝustigebla Dezajno: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Daŭra Konstruo: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Veterrezista: Waterproof rating ensures resilience against rain, sleet, or snow.
- ETL Atestita: Meets safety and quality standards.
Bildo: Fronto view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Agordi
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Preparu por Instalado:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ensure the mounting surface is stable and can support the fixture's weight.
- Muntu la Fiksaĵon:
- Aligu la muntan krampon al la krucvojo uzante la provizitajn ŝraŭbojn.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Agordu Lumkapojn kaj Sensilon:
- Loosen the adjustment screws on the light heads and motion sensor.
- Position the light heads to cover the desired illumination area.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Restarigu potencon: Reŝaltu la potencon ĉe la ŝaltilo.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Funkciaj Instrukcioj
The motion sensor has adjustable settings to customize its operation.
- Agordo de TEMPO: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: This dial determines the ambient light level at which the motion sensor becomes active.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Komenca Ŝaltado: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Prizorgado
- Purigado: Purigu la aparaton per mola, damp tuko. Ne uzu abraziajn purigilojn aŭ solvilojn. Certigu, ke la elektro estas malŝaltita antaŭ ol purigi.
- Inspektado: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LEDoj: The integrated LED bulbs are designed for long life and are not user-replaceable.
Solvado de problemoj
| Problemo | Ebla Kaŭzo | Solvo |
|---|---|---|
| Lumo ne ekbruliĝas. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Lumo restas ŝaltita senĉese. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Lumo flagras aŭ malheliĝas. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| La atingo de la movsensilo estas malbona. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specifoj
| Modela Nombro | SM-4000-180-2H |
| Marko | Amazon Basics |
| Wattage | 40W |
| Brilo | 4000 Lumenoj |
| Kolora Temperaturo | 5000K Taglumo |
| Detekta Angulo | Ĝis 180° |
| Detekta Gamo | Ĝis 49 futoj |
| Voltage | 120 Voltoj |
| Materialo | Aluminio, Plasto |
| Akvorezista Nivelo | Akvorezista |
| Atestoj | ETL Atestita |
| Dimensioj de la objekto (L x W x H) | 14.96" x 6.3" x 5.12" |
| Item Pezo | 1.9 Funtoj |
Garantio kaj Subteno
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.