Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Enkonduko

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Sekurecaj Informoj

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Use only the power cord supplied with the printer.
• Ne elmetu la presilon al akvo aŭ troa humideco.
• Ensure the printer is placed on a stable, level surface.
• Evitu bloki ventolajn aperturojn.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Pako Enhavo

Kontrolu, ke ĉiuj eroj ĉeestas en la pakaĵo:

• Intermec PC43TB01100201 Printer Unit
• Usona Elektroŝnuro
• Rapida Komencgvidilo (ne inkluzivita en ĉi tiu manlibro)
• Software/Driver CD (may vary by package)

4. Instalado

4.1 Malpakado kaj Lokigo

1. Zorge forigu la presilon el ĝia pakaĵo.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Konekta Potenco

1. Connect the supplied US power cord to the printer's power input.
2. Konektu la alian finon de la elektra ŝnuro en surterigitan elektran ellasejon.

4.3 Konekti al komputilo

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB-Konekto: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN-Konekto: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Ŝarĝado de Presmaterialoj (Etikedoj/Rubando)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Malfermu la kovrilon de la presilo.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Fermu la kovrilon de la presilo.

5. Funkciaj Instrukcioj

5.1 Ŝalti/Malŝalti

• Por ŝalti: Press the power button located on the printer. The LCD display will illuminate.
• Por Malŝalti: Press and hold the power button until the printer shuts down.

5.2 Uzante la LCD-ekranon

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Presado

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Malfermu vian etikeddezajnan programaron aŭ aplikaĵon.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Komencu la preslaboron.

The printer features a tear-off function for easy label separation after printing.

6. Prizorgado

6.1 Purigado de la presilo

Regula purigado helpas konservi la preskvaliton kaj plilongigas la vivdaŭron de la presilo.

• Presaĵkapo: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Platen Roller: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Ekstero: Viŝu la eksteron per mola, damp ŝtofo. Ne uzu abraziajn purigilojn.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Respondecaj problemoj

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Presilo ne respondas:
  • Kontrolu potencajn konektojn.
  • Verify USB or LAN cable connections.
  • Rekomencu la presilon kaj komputilon.
  • Ensure printer drivers are correctly installed.
• Malbona Presa Kvalito:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Labels Not Feeding Correctly:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Specifoj

9. Garantio kaj Subteno

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Fabrikisto: Intermec
• Modela Nombro: PC43TB01100201
• For technical assistance, visit the official Intermec support webretejo aŭ kontaktu ilian klientan servon.