A&D Waterproof Interval Timer AD-5709TL User Manual

1. Enkonduko

Dankon pro la aĉetoasing the A&D Waterproof Interval Timer AD-5709TL. This versatile timer is designed for various applications, from kitchen use to sports training, offering precise timing and robust features. Its IPX7 waterproof rating ensures durability in wet environments, while its multi-timer and repeat functions provide flexibility for complex timing needs. Please read this manual carefully to ensure proper use and maintenance of your device.

Figuro 1.1: Fronto view of the A&D Waterproof Interval Timer AD-5709TL, displaying its digital screen and control buttons.

2. Ŝlosilaj Trajtoj

• IPX7 Fully Waterproof: Designed to withstand splashes and submersion, ideal for kitchen and outdoor use.
• Funkcio de Multtempigilo: Capable of memorizing and running up to 8 individual timer settings sequentially.
• Ripeta Funkcio: Set the timer to repeat from 1 to 999 times, or for an indefinite duration.
• Sciigo de Duobla Alarma: Alerts with both a red LED light (blinks for approx. 30 seconds) and a buzzer sound (5 or 30 seconds duration).
• Countdown & Count-up Modes: Functions as a countdown timer for set intervals and a count-up timer from zero.
• Memorfunkcio: Stores frequently used timer settings for quick recall.
• Magneta Subteno: Equipped with a magnet for convenient attachment to metal surfaces.

Figure 2.1: The timer's magnetic backing allows for easy attachment to metal surfaces, as shown with paper clips.

Figure 2.2: The timer is shown submerged in water, highlighting its IPX7 waterproof rating for use in wet environments.

3. Instalado

3.1. Pako Enhavo

• A&D Waterproof Interval Timer AD-5709TL
• Instrukcia Manlibro
• CR2032 Lithium Battery (for monitor use)

3.2. Bateria Instalado

The timer uses one CR2032 lithium battery. A battery is included for initial monitoring purposes. For long-term use, it is recommended to replace it with a new battery.

1. Trovu la bateriujo sur la malantaŭo de la tempmezurilo.
2. Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
3. Enmetu la CR2032-baterion kun la pozitiva (+) flanko supren.
4. Replace the battery cover and twist clockwise to secure it.

Bildo 3.1: Malantaŭa view of the timer, illustrating the battery compartment and the CR2032 battery for installation.

3.3. Unua Ŝaltado

Once the battery is correctly installed, the timer will automatically power on and display '00:00'.

4. Operacio

4.1. Butonaj Funkcioj

4.2. Setting a Countdown Timer

1. Ensure the timer display is '00:00'. If not, press the Haltu butono por restarigi.
2. Uzu la 1分, 10秒, kaj 10分 buttons to set your desired countdown time. The maximum setting is 99 minutes 50 seconds, and the minimum is 10 seconds.
3. Premu la スタート/ポーズ butonon por komenci la retronombradon.
4. Por paŭzi la retronombradon, premu スタート/ポーズ denove. Premu ĝin ankoraŭ unu fojon por rekomenci.
5. When the timer reaches zero, the alarm will sound (buzzer for 5 or 30 seconds) and the red LED will blink for approximately 30 seconds.
6. Premu la Haltu button to silence the alarm and reset the timer to the last set time.

4.3. Using Multiple Timers (Sequential Operation)

The AD-5709TL can store and run up to 8 sequential timer settings. This is ideal for interval training or multi-step processes.

1. Set the first timer duration using the 1分, 10秒, kaj 10分 butonoj.
2. Premu la メモリ button to save this setting as Step 1. The display will show '00:00' or the next step number.
3. Repeat the process to set and save up to 8 steps. Each time you press メモリ, it saves the current setting and moves to the next step number.
4. Once all steps are set, press スタート/ポーズ to begin the sequence. The timer will count down each step consecutively.
5. The alarm will sound after each step completes, and the timer will automatically proceed to the next step.

Figuro 4.1: Ekzample of sequential timer operation with multiple steps and repeat functionality.

4.4. Ripeti Funkcion

After setting your sequential timers (or a single timer), you can set the number of times the sequence should repeat.

1. After setting your timer steps (as described in 4.3), press the メモリ button repeatedly until the display shows the repeat count setting (e.g., 'RPT 001').
2. Uzu la 1分, 10秒, kaj 10分 buttons to adjust the repeat count from 1 to 999.
3. To set for permanent (infinite) repeat, continue pressing the buttons until 'RPT INF' or similar is displayed.
4. Premu スタート/ポーズ to start the repeating timer sequence.

4.5. Count-up Function

To use the count-up function:

1. Ensure the timer display is '00:00'.
2. Premu la スタート/ポーズ button. The timer will immediately start counting up from 00 minutes 00 seconds.
3. Premu スタート/ポーズ again to pause the count-up.
4. Premu la Haltu button to stop the count-up and reset the display to '00:00'.

5. Prizorgado

5.1. Purigado

To clean the timer, wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse the device in water beyond its IPX7 rating. Ensure the battery compartment is securely closed before cleaning with moisture.

5.2. Bateria Anstataŭigo

When the display becomes dim or the timer functions erratically, it's time to replace the battery. Follow the steps in Section 3.2 for battery installation. Always use a new CR2032 lithium battery.

5.3. Stokado

Store the timer in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, it is recommended to remove the battery to prevent leakage.

6. Respondecaj problemoj

7. Specifoj

Figure 7.1: Visual representation of the timer's dimensions, weight, battery information, and alarm features.

8. Garantio kaj Subteno

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or inquiries, please contact A&D customer service through their official website or the retailer from whom you purchased the product. Please retain your proof of purchase for warranty validation.

For more information, visit the official A&D webretejo: www.aandd.co.jp