JBL JRX218S

JBL Professional JRX218S 18-Inch Passive Subwoofer Instruction Manual

Model: JRX218S

1. Enkonduko

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional JRX218S 18-Inch Passive Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The JRX218S is designed to deliver powerful low-frequency sound for various professional audio applications.

JBL Professional JRX218S 18-Inch Passive Subwoofer front view

Figuro 1: Fronto view of the JBL Professional JRX218S 18-Inch Passive Subwoofer.

2. Gravaj Sekurecaj Informoj

  • Legu Instrukciojn: Konservu ĉi tiujn instrukciojn por estonta referenco.
  • Atentu Avertojn: Sekvu ĉiujn avertojn sur la produkto kaj en la operaciumoj.
  • Akvo kaj Humideco: Ne uzu ĉi tiun aparaton proksime de akvo.
  • Purigado: Purigu nur per seka tuko.
  • Ventolado: Ne bloku iujn ajn ventoladmalfermaĵojn. Instalu laŭ la instrukcioj de la fabrikanto.
  • Varmo: Ne instalu proksime de iuj varmofontoj kiel radiatoroj, varmoregistriloj, fornoj aŭ aliaj aparatoj (inkluzive de ampligiloj) kiuj produktas varmon.
  • Potenca Ŝnuro-Protekto: Protektu la elektran ŝnuron kontraŭ piedpremado aŭ pinĉado, precipe ĉe ŝtopiloj, oportunaj ujoj kaj la punkto kie ili eliras el la aparato.
  • Akcesoraĵoj: Uzu nur aldonaĵojn/akcesoraĵojn specifitajn de la fabrikanto.
  • Muntado: Uzu nur kun la ĉaro, stando, tripiedo, krampo aŭ tablo specifita de la fabrikanto aŭ vendita kun la aparato. Kiam ĉaro estas uzata, singarde movas la ĉaron/aparata kombinaĵo por eviti vundon pro renversiĝo.
  • Servado: Referu ĉian servadon al kvalifikita servopersonaro. Servado estas postulata kiam la aparato estis iel ajn difektita, kiel elektra ŝnuro aŭ ŝtopilo estas difektita, likvaĵo estis verŝita aŭ objektoj falis en la aparaton, la aparato estis eksponita al pluvo aŭ humideco, ne funkcias normale. , aŭ estis faligita.

3. Kio estas en la skatolo

Upon opening the packaging, verify that all components are present and in good condition:

  • JBL Professional JRX218S 18-Inch Passive Subwoofer
  • Uzanta Manlibro (ĉi tiu dokumento)

Se iuj aĵoj mankas aŭ difektas, bonvolu kontakti vian komerciston tuj.

4. Instalada Gvidilo

4.1 Lokigo

For optimal bass response, place the JRX218S subwoofer on a stable, flat surface. Corner placement can often enhance bass output, but experiment with different positions to find the best sound for your environment. Ensure adequate space around the unit for proper ventilation.

4.2 Konektoj

The JRX218S is a passive subwoofer and requires an external amplifier. Connect your amplifier's output to one of the SpeakON inputs on the rear panel of the subwoofer. The two SpeakON inputs are wired in parallel, allowing for easy daisy-chaining to another passive speaker or subwoofer. Ensure your amplifier can safely drive a 4-ohm load.

JBL Professional JRX218S 18-Inch Passive Subwoofer rear panel with SpeakON inputs

Figure 2: Rear panel showing SpeakON input connectors.

4.3 Poluso-muntado

The subwoofer features a top-mounted, cast aluminum 35 mm pole mount receptacle. This allows you to mount a mid/high speaker cabinet directly above the subwoofer using an optional SS3BK pole (sold separately), creating a compact and integrated full-range sound system. Ensure the pole and mounted speaker are stable and secure.

JBL Professional JRX218S 18-Inch Passive Subwoofer with a pole-mounted speaker

Figure 3: JRX218S with an optional pole-mounted speaker (speaker and pole not included).

5. Funkciaj Instrukcioj

5.1 Potenca uzado

The JRX218S has a continuous power handling capacity of 350 Watts and a peak power handling of 1400 Watts. It is crucial to match your amplifier's output to these specifications to prevent damage to the subwoofer. Overpowering or underpowering can lead to poor performance or component failure.

5.2 Impedance and Frequency Response

The subwoofer operates at an impedance of 4 ohms. Its frequency range is 34Hz-250Hz (-10dB), with a frequency response of 53Hz-250Hz (±3dB). This range is optimized for deep bass reproduction.

5.3 Sistemintegriĝo

When integrating the JRX218S into a larger PA system, use an external crossover to send only low-frequency signals to the subwoofer. This ensures efficient operation and prevents the subwoofer from attempting to reproduce frequencies outside its optimal range, which can lead to distortion and reduced performance.

6. Prizorgado

6.1 Purigado

To maintain the appearance and performance of your subwoofer, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the carpet covering and internal components.

6.2 Enclosure and Grille

The rugged enclosure is constructed from 19 mm (.75 in) Medium Density Fiberboard (MDF) and covered in black carpet. The 18-gauge perforated steel grille protects the speaker components. Inspect these periodically for any signs of damage. Minor scuffs on the carpet can often be brushed out. Do not attempt to remove the grille unless you are qualified service personnel.

7. Respondecaj problemoj

ProblemoEbla KaŭzoSolvo
Neniu Sona Eligo
  • Incorrect wiring or loose connections.
  • Amplifier not powered on or faulty.
  • Crossover settings incorrect (no low frequencies sent).
  • Check all SpeakON connections between ampligilo kaj subwoofer.
  • Kontrolu ampvivigilo-potenco kaj funkcieco.
  • Ensure your audio processor or mixer is sending low-frequency signals to the subwoofer output.
Distordita Sono
  • Overdriving the subwoofer (too much power).
  • Amplifier tondado.
  • Incorrect crossover frequency.
  • Reduce input level to the ampligilo aŭ subwoofer.
  • Kontrolu amplifier gain settings; ensure it's not clipping.
  • Adjust crossover to send only appropriate low frequencies to the subwoofer.
Weak or Insufficient Bass
  • Subwoofer phase issue.
  • Improper placement.
  • Amplifier not powerful enough.
  • Se via amplifier or processor has a phase switch, try inverting the phase.
  • Experiment with different subwoofer placements (e.g., closer to a wall or corner).
  • Certigu vian amplifier provides sufficient power for the subwoofer's continuous rating.

8. Teknikaj Specifoj

KarakterizaĵoDetalo
ModeloJRX218S
Tipo de parolantoPasiva Subwoofer
Woofer Diametro18 Coloj
Power Handling (Continuous/Peak)350W / 1400W
Impedanco4 Ohmoj
Frekvenca Gamo (-10dB)34 Hz - 250 Hz
Ofteca Respondo (± 3dB)53 Hz - 250 Hz
Maksimuma Pinta SPL133dB SPL
Konektebleco2 x SpeakON NL-4 (parallel)
Enfermaĵo Materialo19 mm (.75 in) MDF with black carpet covering
Krado18-gauge perforated steel
Pola MontoTop-mounted, cast aluminum 35 mm receptacle
Dimensioj (H x L x P)23.5" x 20.3" x 22" (597 mm x 516 mm x 559 mm)
Pezo71 funt. (32.5 kg)
JBL Professional JRX218S 18-Inch Passive Subwoofer dimensions diagram

Figure 4: Dimensions of the JRX218S subwoofer.

9. Garantio kaj Subteno

9.1 Garantiaj Informoj

The JBL Professional JRX218S 18-Inch Passive Subwoofer comes with a manufacturer's limited warranty. Please refer to the warranty card included with your product or visit the official JBL Professional webretejo por detalaj kondiĉoj. Konservu vian pruvon de aĉeto por garantiaj reklamoj.

9.2 Klienta Subteno

For technical assistance, service, or further inquiries, please contact JBL Professional customer support. Contact details can typically be found on the official JBL webretejo aŭ en la produkta pakado.

© 2024 JBL Professional. Ĉiuj rajtoj rezervitaj.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.