PDU 12P 10A 200-240V
Cloud Managed 2U 10A Smart PDU with 12 Metered Outlets (ECP212-INT)
Introduction
This Quick Start Guide is designed to guide you through installing the PDU 12P 10A 200-240V, model ECP212-INT, including hardware mounting and configuration.
PDU 12P 10A 200-240V
Cloud Managed 2U 10A Smart PDU with 12 Metered Outlets
Model: ECP212-INT
Function
- Real-time power consumption monitoring and alarming per outlet
- Remote switching per outlet
- 1.3 inches display for visualizing power information
- Attempt to reconnect from internet outages automatically
- Local and cloud management with analytic reports
- Bracket ears provide different angle installation
Safety
- 12A circuit breaker from overloading protection
- Fireproof MOV and grounded protection
- UL 62368-1, CE, RCM
Integration
- RESTFUL API supported
- SNMP v1 2c 3 supported
Content Quick Links
Hardware Overview
Hardware Installation
Configure with EnGenius Cloud
Package Contents
System Requirements
Web Browser:
- Google Chrome (105.0.5195.127 or later)
- Microsoft Edge (112.0.1722.48 or later)
Network Requirements
Before you get started, please make sure your network environment is DHCP-enabled. EnGenius PDU is assigned with an IP address dynamically by the DHCP server. You could check the given IP address from PDU’s LCD. The IP address is shown under Menu>information.
Hardware Overview
Ports
Reset to default:
- Press and hold the reset button for at least 15 seconds. Holding it for less than 15 seconds will only trigger a reboot. The system will restart automatically without any noticeable indication.
- To initiate a factory reset, navigate to the LCD menu and select the “Factory reset” option. The screen will then indicate the resetting process with a progress bar.
LEDS
| Location | LED Indicator | LED Color | LED Behavior | Status |
| Power | Outlet Switch | White | Solid On | Device On |
| Off | Light Off (0.5 Sec) | Outlet Function On/Off | ||
| LED | Surge Protect | Green | Solid On | Protected |
| Off | Light Off | Unprotected | ||
| Grounded | Green | Solid On | Grounded | |
| Off | Light Off | Ungrounded | ||
| Individual Outlet | Green | Solid On | Enabled | |
| Off | Light Off | Disabled | ||
| Ethernet Port | Left (Link Speed) | Green | Solid On | 1000M |
| Off | Light Off | 100M/10M/No Link | ||
| Right (Status) | Green | Solid On | Link | |
| Flashing | Transmit or Receive | |||
| Off | Light Off | No Link |
Documents / Resources
 | EnGenius ECP212-INT Cloud Managed Switchable Smart PDU [pdf] User Guide ECP212-INT, ECP212-INT Cloud Managed Switchable Smart PDU, ECP212-INT, Cloud Managed Switchable Smart PDU, Managed Switchable Smart PDU, Switchable Smart PDU, Smart PDU, PDU |