Enerlites MPC-B Ceiling Sensor Surface Mount Adapter Installation Guide
DESCRIPTION
The MPC-B adapter will allow any Enerlites ceiling sensor to be installed on the ceiling surface without the need of an electrical box. This surface mount adapter comes complete with a ½ inch knockout, washer, and a lock nut.
TYPICAL RECESSED CEILING SENSOR
J-Box Mount
MOUNTING ADAPTER THROUGH ACOUSTIC CEILING OR WALL BOAR
WARRANTY INFORMATION
This device is warranted to be free of material and workmanship defects for 2 years from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims must be verified and approved by Enerlites, Inc.
Warranties from other Enerlites products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Enerlites shall not be liable to the purchaser or end user customer of Enerlites products for direct, indirect, incidental, or consequential damages even if Enerlites has been advised of the possibility of such damages. Enerlites’ total liability under this or any other warranty, express or implied, is limited to repair, replacement or refund.
Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
© 2021 Enerlites Inc. CA, U.S.A.
WWW.ENERLITES.COM
0202210176
REV 20230802
Documents / Resources
 | Enerlites MPC-B Ceiling Sensor Surface Mount Adapter [pdf] Installation Guide MPC-50V, MPC-50L, MDC-50V, MDC-50L, MPC-B, MPC-B Ceiling Sensor Surface Mount Adapter, Ceiling Sensor Surface Mount Adapter, Sensor Surface Mount Adapter, Surface Mount Adapter, Mount Adapter, Adapter |
