Enclize SE-Es02 Rechargeable LED Reading Light
SAFETY PRECAUTIONS
To prevent damage to people and property, please follow these instructions.
WARNING
- Do not use in unstable places. Prevent the lamp from falling and causing damage.
- Do not insert metal products or flammable objects into the gap of the lamp. Avoid accidents such as fire.
- Do not modify the lamp or replace the parts at will to avoid accidents such as inconvenience or fire.
- Do not install on pipes to avoid slipping and damage to the lamp.
- In case of any malfunction, please contact us for support. Do not disassemble the product by yourself.
SPECIFICATION
- Lamp Model ARCS El
- Rated Voltage SV=
- Power 3W(72×0.2W /LED module)
- Recommended Power Adapter 5V:=lA
HOW TO USE
- Short Press the touch switch to switch the color temperature in cycles: warm white → neutral white → cool white
- Long Press The touch switch to enter the brightness step less dimming mode: 10% ↔ 100%
Note:
- If the switch is not touched for more than 30 seconds, short-press the touch switch again to turn off the light. Within 30 seconds, the color temperature will be switched cyclically.
- Touch keys can perceive subtle changes keenly, and normal functions may not be realized under the following usage conditions.
- When touching items other than fingers (such as gloves, ballpoint pens, etc.).
- When touched slightly or for a very short time.
- When used in a place where the ambient temperature changes rapidly.
- When used in places with large external magnetic interference.
CHARCINC METHOD
- The lamp is charged bythe computer. Connect one end of the USB cable to the charging socket of the lamp and the other end to the computer USB socket.
- Be sure to plug the USB cable firmly until the charging indicator lights up in red to start charging.
- Be sure to plug the USB cable firmly until the charging indicator lights up in red to start charging.
- Use the power adapter (sold separately) to charge the lamp.
- See the recommendations [Specifications] for the optional power adapter.
- Connect one end of the USB cable to the charging socket of the lamp,and the other end to the power adapter, and plug the power adadapter intohe power socket.
Be sure to plug the USB cable firmly until the charging indicator lights up in red to start charging.
Tips:
- When the lamp is charging, the charging indicator of the lamp is red, and the ccharging indicatorwill be off when it is fully charged. At this time, please unplug the USB cable to stop charging.
- When the lamp is not lit, the continuous charging is generally about 1.5 hours. Long-term charging may cause damage to the battery.
- After the battery is fully charged, it can be used for about 4 to 5 hours when the lamp is fully lit.
- The lamp has a built-in lithium battery. It should not be stored for too long. It needs to be charged once every six months to avoid battery damage caused by self-discharge.
- After the battery is used up, the lamp will power off and turn off the light, and the LED light source may turn on and off several times during the power-off process. This is a normal phenomenon. Please recharge the lamp and turn it on again.
NOTES FOR USE
- When the lamp is turned on or the lamp is turned off immediately, there will be a slight noise due to the expansion and contraction of the plastic of the lamp. This is a normal phenomenon and not a malfunction.
- There may be abnormal noise when the angle of the lamp is adjusted. This phenomenon is normal and does not affect the use.
- LED lights have chromatic aberrations; even products of the same product number will have different luminous colors and brightness.
- Do not look directly at the light source with your eyes to avoid eye discomfort.
- The light source in this lamp should be replaced by the manufacturer, its service agent, or a similarly qualifiedd person.
- The LED does not light up when the lamp is used for the first time, which is a normal phenomenon. Please use it after charging.
- Please avoid direct sunlight and keep away from heating elements.
- Before disposing of the lamp, you must remove the lithium battery from the lamp and dispose of the battery safely. When removing the battery, disconnect the power first to avoid accidents such as electric shock.
WHEN A FAULT IS SUSPECTED
Before repairing, please check according to the following table.
Phenomenon
- The LED light isn’t working
- LED light goes out during use
Reason
- The lithium battery is dead
Handling
- Lamp charging
If the fault is not resolved or an abnormal phenomenon is found after inspection, please contact the seller.
MAINTENANCE
- For the best usage of our product, please do repair and maintenance twice a year.
- Do not use detergents or organic solvents other than neutral detergents to wipe the lamps to avoid discoloration, deterioration, strength reduction or damage to the lamps.
- Please do not spray insecticide on the lamp, otherwise,e it will cause the lamp to change color or be damage.
FREQUENTLY ASKED QUESTIONS
What is the battery life of the Enclize SE-Es02 Rechargeable LED Reading Light?
The Enclize SE-Es02 provides up to 70 hours of wireless use on the lowest brightness setting when fully charged.
How do I charge the Enclize SE-Es02 Rechargeable LED Reading Light?
You can charge the Enclize SE-Es02 using the included USB cable. Simply plug it into any USB power source.
How do I adjust the brightness on the Enclize SE-Es02 LED Reading Light?
Touch and hold the power switch to access stepless dimming from 10 percent to 100 percent brightness.
How do I change the color temperature on the Enclize SE-Es02 LED Reading Light?
Short-touch the switch to toggle between 3 color temperatures: warm, neutral, and cool white.
What devices can the Enclize SE-Es02 LED Reading Light clip onto?
Thanks to its adjustable clip, it can attach to books, tablets, Kindles, e-readers, music stands, and more.
How long does it take to fully charge the Enclize SE-Es02 LED Reading Light?
The light takes approximately 2 to 3 hours to charge fully using the included USB cable.
What should I do if the Enclize SE-Es02 LED Reading Light doesnt turn on?
Ensure its charged. If fully charged and still unresponsive, press and hold the button for a few seconds or try a different USB cable and power source.
How much does the Enclize SE-Es02 Rechargeable LED Reading Light weigh?
It weighs only 2.08 ounces (0.13 lbs), making it ideal for clipping onto lightweight reading material.
What is the gooseneck design on the Enclize SE-Es02 LED Reading Light?
The flexible gooseneck allows 360 degree rotation so you can adjust the angle and lighting direction with ease.
DOWNLOAD THE PDF : Enclize SE-Es02 Rechargeable LED Reading Light Operation Manual