Encased Thore Bluetooth Headphones w/Lightning Connector for iPhone

Specifications

• Product Dimensions 
  2 x 3 x 6 inches
• Item Weight 
  1.25 pounds
• Batteries 
  1 Lithium Ion batteries
• Form Factor 
  Over Ear
• Connectivity Technology 
  Bluetooth, Wired
• Wireless Communication Technology 
  Bluetooth
• Wireless BT Version
  4.1
• Frequency
  2.402-2.480GHz
• Support Mode
  HSP HFP A2DP AVRCP
• Operating range
   Up to 10 meters (33 feet)
• Brand 
  ENCASED

Introduction

Experience every note in beautiful high-res detail with the Thore C250 Revolution headphones. The pair provides rich immersive sound – bass is firm and weighted while the mids and highs are clear and vibrant with excellent detail. Sink in to enjoy the comfort of protein leather ear cups bolstered with Allora memory foam.

Our bet? You’ll never go back to earbuds

We recommended taking a few moments to read through this guide and get to know all the great features your C250 Revolution has to offer.

Overview of Wireless Headphones

Charging

Connect the charging cable to a power source and to the charging port on the Headphones. (Charging port is under rubber cover on the bottom of right earphone).

The LED indicator will turn red during charging and turn off when fully charged.

For optimal battery performance, fully charge for three hours before first use. Headphones will power off when the charger cable is connected, you may power on while charging. Headphone battery level will be visible on the connected device that supports this feature.

Power On

Press for two seconds, a voice prompt will indicate that the Headphones have powered on. Once powered on, the Headphones will attempt to connect with a previously paired device. On first power on, and when Headphones do not detect a previously paired device, the Headphones will automatically enter pairing mode indicated by a voice prompt and the LED indicator flashing blue and red alternately (for pairing instructions, see the Pairing section, step 2).

Power Off

Press for four seconds, a voice prompt will indicate that the Headphones have powered off.

Pairing

1. With Headphones powered off, press and hold for three seconds, and a voice prompt will indicate that the Headphones have entered pairing mode and the LED indicator will flash blue and red alternately.
2. Enable Bluetooth on a mobile device (for detailed information, refer to the user manual of the mobile device).
3. On a mobile device, select “C250” (the Headphones) in the pairing list, if prompted for a Password, (sometimes called a “Passkey”, or “PIN Number”) enter “0000” or “1234”.
4. A voice prompt will indicate that the Headphones and device have paired.

Note
Pairing mode will automatically be canceled after three minutes. To re-enter pairing mode, see pairing instructions.

Remove Paired Devices

1. Powered off
2. Press and hold for ten seconds (LED indicator with turn purple)
3. Power off (Depending on paired devices, a power cycle may be necessary. To power cycle, unplug Headphones, connect the power cable until the LED indicator turns red, then unplug.)

Media and Phone Control

• Volume
   Press or until the desired volume is reached.
• Play and Pause
   While the media app is open on the connected device, press to Play or Pause.
• Previous and Next
   While the media app is open on the connected device,
  Press and hold or navigate between tracks.
• Answer Call
   During an incoming call, Press once.
• Reject Call
  During an incoming call, Press twice.
• Ending Call
  During the call, Press Power
• Redial Last Number
   Not during the call, Press twice.

Mobile devices and media apps can change the standard functionality of media and phone buttons. Please consult with device manufacture or app developer should functionality differ than described

Using Headphones with a Wire

Connect audio cable to audio port on Headphones and to an audio source. (Connecting an audio cable to Headphones will automatically power off Headphones. Headphones operate in wired mode when powered off.) Media and phone call control buttons only function when Headphones are in wireless mode or when using an audio cable that supports such functionality.

Battery Life

• Talk
  10-15 Hours
• Music
  8-15 Hours
• Standby
  250 Hours
• Full-charge
  3 Hours

LED Indicator

• Blue and red flashing alternately ……….Pairing
• Blue flashing fast every five seconds ….Paired
• Blue flashing slow every five seconds…Calling
• Red solid …………………………………………Charging
• Purple solid……………………………………..Removing Paired Devices

Safety Information

• Do not expose yourself to excessive heat, water, or moisture.
• Do not drop or disassemble.
• Power off before placing in snug places such as handbags or suitcases.

When cleaning, use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
Operate or store in a place where the temperature is between -15ºC (5ºF) and 55ºC (131ºF) (up to 90% relative humidity. Battery life may vary depending on the climate. To avoid hearing damage, limit use at high volume and set the volume to a safe level. Using headphones with both ears covered while driving is not recommended and may be illegal in some areas.

Warranty

Your new Thore C250 Wireless Headphones is covered by a Limited Manufacturer’s Warranty. Details of the warranty are as follows: for a period of one (1) year from the date of retail purchase, Thore warrants that this product is free of any defects in manufacturing, materials and workmanship. During the warranty period, we shall, at our sole discretion, repair or replace any defective parts within a reasonable period of time and free of charge. Return shipping charges are excluded from warranty coverage.

Frequently Asked Question

References

• User Manual