make it real 1709-INSINT-01-V4 Bracelet Snackers DIY Jewelry Vending Machine Instructions
INSTRUCTIONS
CONTAINS
5 chams
233 assorted beads
CONTAINS
1 surprise sticker
1 surprise ring
1 clear elastic cord 2 m (2.2 yd)
LEGEND
Scissors
Adhesive tape
Clear nail polish
Repeat
Ruler
Not included
BEFORE YOU BEGIN
Read the instructions all the way to the end before starting your project. Have fun!
MAKE A BRACELET
Open the pouch to reveal the contents.
Measure and cut 30 cm (12 in) of clear elastic cord.
Attach the cord to your working surface with a piece of adhesive tape.
Thread the beads and charm onto the cord following the sequence shown.
Make a double knot using the ends of the cord. Secure the knot by covering it with a drop of craft glue or clear nail polish. Allow 5 minutes to dry, then cut off the excess length of cord after the knot.
Repeat steps 1 to 5 to make 4 more beaded bracelets following the patterns below.
TIP
Before wearing the bracelets, gently pull on them to make sure they are well secured. Avoid soaking the bracelets in water.
For video instructions go to:
WARNING!
CHOKING HAZARD – small parts. Not suitable for children under 3 years. STRANGULATION HAZARD Functional long cord – Adult supervision required.
CAUTION: Stickers not intended to be placed on skin. Please retain the instructions since they contain important information.
MAKE IT REAL 1700 Reisterstown Rd Ste 211 Pikesville, MD 21208 USA 410-995-8685 Justin House, 24 Hood Street An coats, Manchester, M4 6WX UK +44 (0) 161 302 4100 © 2024 MAKE IT REAL, LLC
MDSS GmbH Schiff graben 41, 31075, Hannover
Made in China
Icon
Documents / Resources
 |
make it real 1709-INSINT-01-V4 Bracelet Snackers DIY Jewelry Vending Machine [pdf] Instructions 1709-INSINT-01-V4 Bracelet Snackers DIY Jewelry Vending Machine, 1709-INSINT-01-V4, Bracelet Snackers DIY Jewelry Vending Machine, Snackers DIY Jewelry Vending Machine, DIY Jewelry Vending Machine, Jewelry Vending Machine, Vending Machine |