Homestore and More 154711 Ardmore Round Garden Water Feature

Specifications

• Model: ARDMORE ROUND GARDEN WATER FEATURE
• PLU: 154711
• Power Source: Electric
• Material: Reservoir, Fountain Top, Water Tube
• Usage: Outdoor

Product Usage Instructions

• Base Setup:
  Place the base on a flat surface and securely insert the reservoir onto the base.
• Pump Installation:
  Read the pump user manual carefully. Insert the water pump into the water tube.
• Fountain Assembly
  Place the fountain top on the reservoir and submerge the pump into the water. Ensure that the water level is higher than the pump.
• Connection Check: Ensure that the water tube is properly connected to the pump without any crimps or blockages.
• Electrical Setup:
  Align the concave edge of the fountain top with the convex part of the reservoir. Pass the electric wire through the wire opening. Connect the power cable to an outlet. The water flow in the fountain will start shortly if installed correctly.
• Safety Precautions:
  Avoid using the electrical plug in wet weather conditions or adverse weather. Ensure proper handling to prevent injury or property damage.
• Air Escaping:
  During initial use, air may be present in the pump. It might take a few minutes for all the air to escape.

Cleaning and Maintenance

• Power and Cleaning:
  Unplug the pump before cleaning or servicing. Check for sediment or scale build-up in the pump housing or reservoir if power loss or stoppage occurs.
• Blockage Removal:
  If blockages are found, remove them carefully and ensure proper closure of the case.
• Water Care:
  Periodically change water and keep it clean. Use distilled water to prevent mineral build-up and enhance the waterfall effect.

PLU: 154711 ARDMORE ROUND GARDEN WATER FEATURE

• Thank you for purchasing this fine decorative fountain.This product combines our latest design with a creative theme,and is carefully packaged, inspected, and tested to ensure safe operation. The following instructions and safety guidelines will enable you to use the product for trouble-free operation. Please read the instructions and safety guidelines entirely before using the product.
• The product consists of: (1) Fountain Top (2) Reservoir (3) Pump

Instructions for use:

1. Remove plastic bag from packaging. Read this instruction sheet before proceeding.
2. Place base on a flat surface, and insert reservoir onto base.
3. Read pump user manual. Insert the water pump into water tube.
4. Insert fountain top on reservoir and put pump into water. Water should be higher than the pump.
5. Make sure the water tube is properly connected with the pump, and is not crimpled.
6. The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening.
7. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
8. Please do not use the electrical plug in wet weather conditions.
9. Please do not use in adverse weather conditions.

Please note: On first use, there may be air in the pump. It may take several minutes until all the air escapes.

Safety Guidelines:

1. Read all instructions and safety guidelines thoroughly. Failure to follow guideline and instructions could result in serious injury and/or property damage.
2. Do not pump flammable liquids such as gasoline or fuel oil with the fountain pump.
3. Make sure the water tube is properly connected with the pump and the upper layer, and the tube is not crimpled.This could cause a blockage, and water will not come out.
4. During operation, the area around the pump will be covered with water. Take care when handling the pump; do not pull it out of the water (when running) by the power cord, and do not move the product while in operation.
5. Unplug the pump from electric power before servicing, cleaning, or moving.

Cleaning and Maintenance: 

1. If, after time, the pump starts to lose power or stops working, you should check for the build-up of sediment or scale at the bottom of the pump housing, or in the reservoir.
2. Remove the blockage or any dirt and scale which may have built up and close the case back up.
3. Periodically change water and keep water clean. We recommend distilled water to prevent mineral build-up. This will improve the waterfall effect.

FAQs

Q: Can I use flammable liquids with the fountain pump?
A: No, avoid pumping flammable liquids like gasoline or fuel oil with the fountain pump to prevent hazards.

Q: What should I do if the pump stops working?
A: Check for sediment or scale build-up in the pump housing or reservoir. Clean any blockages and ensure proper maintenance.

Documents / Resources

Homestore and More 154711 Ardmore Round Garden Water Feature [pdf] Installation Guide 154711 Ardmore Round Garden Water Feature, 154711, Ardmore Round Garden Water Feature, Round Garden Water Feature, Garden Water Feature, Water Feature

References

• User Manual