NuPhy Node 100 Low-Profile Wireless Mechanical Keyboard
Product Using Instructions
- Short-press to switch between devices, long-press for 3 seconds to enter pairing mode.
- Plug the 2.4G receiver into your computer after pressing FN + 4.
- Turn the Sleep mode on or off. If no operation is detected on the keyboard, the light will turn off, and the device will enter sleep mode after 6 minutes.
- Long-press for 3 seconds to restore factory settings.
- Visit nuphy.io to use the product with the web driver/configurator.
Wireless Device Connection
- Short press to switch between devices; long press 3 seconds to enter pairingmode. Plug the 2.4G receiver into your computer after pressing FN + 4.
System Selection
Win mode
Mac model
Connection Mode Selection
Power Off
Wired mode
Wireless mode
In the wired mode, it is necessary to use a data cable to connect with the device.
Dot Matrix
Power: 1%~20%
Power: 21%~45%
Power: 46%~70%
Power: 71%~95%
Power: 96%~ 100%
Caps lock
Wired mode
2.4G mode
Bluetooth mode 1&2&3
Sleepmode On
Sleepmode Off
Touch Bar Functions
Volume -+
Mute
Next track
Screen brightness – +
Brightness -+
Lock & unlock the touch bar
More features available at NuPhyIO
Backlight Settings
Brightness + –
Backlight effect switching
Backlight color switching
Backlight speed –
Turn all lights on and off
Dot Matrix Settings
Dot matrix brightness +-
Dot matrix effect switching
Dot matrix speed -+
Dot matrix on & off
Sleep Mode Setting
Turn the Sleep mode on or off- If there is no operation on the keyboard, it will turn off the light and enter sleep mode after 6 minutes.
Screenshot Shortcut
Full-screen screenshot
Section screenshot
Other Key Combos
Enable/disable permanent battery level display
Factory Reset
Long-press for 3 seconds to restore factory settings
CONTACT
- Visit nuphy.io to use the product with the web driver/configurator.
- Mac Mode: LAYER O/ / 2 / 3
- Win Mode: LAYER4/5/6/7
- nuphyio.com
FAQ
How do I switch between wireless devices?
Use FN + 1, 2, 3 for Bluetooth devices and FN + 4 for 2.4GHz.
How can I change the backlight settings?
Use FN + arrow keys to adjust brightness, effect, color, and speed.
What should I do if the keyboard enters sleep mode?
Press any key to wake it up. You can also adjust sleep settings using FN + 3.
How do I perform a factory reset?
Press and hold the reset button for 3 seconds.
Documents / Resources
 |
NuPhy Node 100 Low-Profile Wireless Mechanical Keyboard [pdf] User Guide Node100-LP, 251118, 251114, Node 100 Low-Profile Wireless Mechanical Keyboard, Node 100 Low-Profile, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard |