FRANKLIN SENSORS i12 12 Inch Sensors Light Level
Product Specifications
- Brand: Franklin Sensors Inc.
- Model: i12
- Type: Magnetic Level
- Power Source: 1 AA battery (included)
- Dimensions: 12 inches
- Color: Green when the level
How to Read the I-Level:
The i-Level turns green when the surface is level. Securely attach it to metallic surfaces for accurate readings.
Installation:
Place the i-Level on the desired metallic surface. Ensure it is securely attached before use.
Powering the Device:
Insert the included AA battery into the device to power it.
Maintenance:
Keep the i-Level clean and free from dirt or debris to ensure accurate readings.
Warranty Activation
To activate your limited lifetime warranty, scan the QR code on the device, enter your information, and follow the activation steps.
OPERATING INSTRUCTIONS
POWER ON/OFF
- Press down once on the power button. LEDs should illuminate immediately.
- Press down again while illuminated to turn power off.
- The unit will timeout (power off) if left untouched for 5 minutes.
HOW TO READ THE I-LEVEL
The iLevel is designed to level both vertical and horizontal surfaces by displaying a range of colors diagramed:
- Green: Level.
- Yellow: Approaching level.
- Red: Not level.
Turns Green When Level REPLACING THE BATTERIES
- Remove the battery cover by sliding the cover and lifting.
- Remove the battery and dispose of it properly. Please recycle.
- Replace with 1 new AA battery.
- Install the battery according to polarity (+/-).
- Close the battery cover by sliding the cover into place.
MAGNETIC: Securely attaches to metallic surfaces.
- This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
- Requires 1
- AA battery. Battery included.
- FRANKLIN SENSORS INC. 6675 N Pollard Lane Meridian, ID 83646 208-918-2403
- www.franklinsensors.com ©2024 Franklin Sensors Inc.
- Patent No. 11,852,503 INSi12.0
Activate Your Limited Lifetime Warranty
- Scan the QR Code
- Enter Info
- Warranty Activated
Did Something Go Wrong? Please call us! 208-918-2403
Frequently Asked Questions
Q: What should I do if the i-Level does not turn green?
A: Ensure that the device is securely attached to a metallic surface and that it is level before use. If issues persist, contact customer support.
Q: How do I replace the battery?
A: Open the battery compartment, remove the old battery, and insert a new AA battery. Ensure proper polarity when inserting the battery.
Documents / Resources
 |
FRANKLIN SENSORS i12 12 Inch Sensors Light Level [pdf] Instruction Manual i12 12 Inch Sensors Light Level, i12, 12 Inch Sensors Light Level, Sensors Light Level, Light Level |