electro-harmonix Satisfaction Vintage Fuzz Pedal User Manual
SATISFACTION VINTAGE FUZZ
Congratulations on your purchase of the Satisfaction Fuzz, a modern recreation of the classic fuzz sounds of the 1960s. Updated with a compact nano chassis, the Satisfaction creates drive sounds ranging from crunchy breakup to intense fuzz. Attack and Volume controls put you in the mix, and true-bypass switching keeps your bypassed signal intact
– Controls the amount of input gain and distortion. As you turn this knob clockwise, the SATISFACTION ranges from mild drive to saturated fuzz.
Sets the output level of the SATISFACTION.
FOOTSWITCH and LED
The Footswitch selects whether the SATISFACTION is engaged or in true bypass mode. When the effect is engaged, the LED is lit.
INPUT Jack – This ¼” jack is the audio input for the SATISFACTION. The input impedance is 50k.
This ¼” jack is the audio output from the SATISFACTION. The output impedance depends on the VOLUME setting, ranging from 100 to 25k.
9V Power Jack
The SATISFACTION can run off of a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack. We recommend the EHX9.6DC-200. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The SATISFACTION draws 1.5mA at 9VDC. The maximum voltage that may be connected to the 9V Power Jack is 10VDC.
CHANGING THE BATTERY
To change the battery, remove the four screws on the bottom of the SATISFACTION and take off the bottom plate. The battery clip is in the bottom of the unit. Take care not to touch the circuit board while changing the battery in order to avoid damaging a component.
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX Customer Service for information on warranty repairs at [email protected] or +1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Email: [email protected]
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
Tel: +44 179 247 3258
Email: [email protected]
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at [email protected]
Read More About This Manual & Download PDF:
Documents / Resources
|electro-harmonix Satisfaction Vintage Fuzz Pedal [pdf] User Manual|
Satisfaction, Vintage Fuzz Pedal, Satisfaction Vintage Fuzz Pedal