ELECOM M-CAD01UB Wired Mouse For 3D CAD (3 Buttons) User Manual

Model: M-CAD01UB
Wired Mouse
Manual

Contents hide

1 Name and function of each part

2 How to use the mouse

3 Safety Precautions

4 Limitation of Liability

5 Documents / Resources

5.1 References

6 Related Posts

Name and function of each part

Left button
To left-click on your PC.
Right button
To right-click on your PC.
Middle button
To middle click on your PC.
USB connector (male)
Pointer speed change switch
To change the pointer speed. : 1200 dpi
: 600 dpi
Optical sensor
Please note that looking directly into the sensor light may hurt your eyes.

Removing this product from your PC
This product supports hot plugging. The USB connector may be removed while the PC is operating.

How to use the mouse

Start the PC.
Start the PC, and then wait for it to be ready to perform operations.
Insert the USB connector of the product into a USB port on the PC.
Any USB port may be used.

Be sure to sufﬁciently check the connector orientation and the insertion location.
If you feel strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
Do not directly touch the terminal area of the USB connector.

The driver will be automatically installed, and you will then be able to use the mouse.

Supported OS	® Windows 10, Windows ® 8.1, Windows ® 7, Windows ® XP (Updating the OS or installing a service pack may be necessary.) * Compatibility information was retrieved during operation conﬁrmation in our veriﬁcation environment. There is no guarantee of complete compatibility with all devices, OS versions, and applications.
Resolution	600/1200 dpi (switchable)
Interface	USB
Read method	Optical sensor method
LED	Blue
Dimensions (W × D × H)	approx. 71 × 110 × 38 (mm) * excluding cable
Cable length	approx. 1.5 m
Operational temperature/humidity	5°C to 40°C/ up to 90%RH (without condensation)
Storage temperature/humidity	-10°C to 60°C/ up to 90%RH (without condensation)

Safety Precautions

Prohibited action
Mandatory action
The situation that needs attention

WARNING
If a foreign object (water, metal chip, etc.) enters the product, immediately stop using the product, and remove the product from the PC. If you continue to use the product under these conditions, it may cause a ﬁre or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a strange smell, immediately stop using the product, shut down the PC, and then sufﬁciently check whether the product is generating heat while being careful to avoid being burned. Then, remove the product from the PC . After that, contact the retailer from whom you purchased the product. Continuing to use the product under these conditions may cause a ﬁre or electric shock.
Do not drop the product or otherwise subject it to impacts. If this product is damaged, immediately stop using it, remove the product from the PC. After that, contact the retailer from whom you purchased the product. Continuing to use the product while it is damaged may cause a ﬁre or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as this may cause a ﬁre, electric shock or product damage.
Do not put this product in ﬁre, as the product may burst, resulting in a ﬁre or injury.
Do not insert or remove the connector with wet hands. Also, do not make alternations to or forcefully bend the connector. Doing so may cause a ﬁre or electric shock.

CAUTION

Do not place this product in any of the following environments:

In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
In a moist place or a place where condensation may occur
In an uneven place or a place exposed to vibration
In a place where a magnetic ﬁeld is generated (near a magnet, etc.)
In a dusty place

This product does not have a waterproof structure.
Use and store this product in a place where the product body will not be splashed with water or other liquid.
Rain, water mist, juice, coffee, steam, or sweat may also cause product damage.

Do not use this mouse for any purpose other than for use with your computer.
Do not use this product with any device that may signiﬁcantly be affected in the case of this product malfunctioning.
If this product is used on a transparent surface such as glass or a highly reﬂective surface such as a mirror, the optical sensor will not function correctly and the mouse pointer movement will become unstable.
If this product is not going to be used for one month or longer, remove the connector from the PC.
Avoid looking directly at the light of the optical sensor as doing so may cause eye damage.
When you no longer need to use this product, be sure to dispose of them in accordance with the local ordinances and laws of your area.

Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
The use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may affect the material quality and color of the product.

Limitation of Liability

In no event will ELECOM Co., Ltd be liable for any lost proﬁts or special, consequential, indirect, punitive damages arising out of the use of this product.
ELECOM Co., Ltd will have no liability for any loss of data, damages, or any other problems that may occur to any devices connected to this product.

Compliance status
www.elecom.co.jp/global/certiﬁcation/

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
In order to make an impResponsible party (For FCC matters only)
Around The World Trading Inc.,
7636 Miramar Rd #1300, San Diego, CA 92126
telecoms. comovements to this product, the design and speciﬁcations are subject to change without prior notice.

Wired Mouse: M-CADOlUB Equipment name Type designation (Type)
Unit	Restricted substances and its chemical symbols
Unit	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent chromium (Cr+6)	Polybrominated biphenyls (PBB)	Polybrominated diphenyl ethers (PBDE)
				0
	0	0	0	0	0	0
	0	0	0	0	0	0
	0	0	0	0	0	0
Note 1: “Exceeding 0.1 wt %” and “exceed 0.01 wt %” indicates that the percentage content of the restricted substance exceeds the reference percentage value of present condition. Note 2: “C)” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3 : The “-” indicates that the restricted substance corresponds to the exemption.

ELECOM CO., LTD.
www.elecom.co.jp/global/

ELECOM Korea Co., Ltd. Dome-Bldg 5F, 60, Nambusunhwan-ro 347-gil, Seocho-gu, Seoul, 06730, South Korea TEL : +82 (0) 2 – 1588 – 9514 FAX : +82 (0) 2 – 3472 – 5533 www.elecom.co.kr	ELECOM Sales Hong Kong Ltd. 2/F, Block A, 2-8 Watson Road, Causeway Bay, Hong Kong TEL : +852 2806 – 3600 FAX : +852 2806 – 3300 email: info@elecom.asia
ELECOM (SHANGHAI) TRADING Co., Ltd Room 208-A21, 2nd ﬂoor, 1602 Zhongshanxi Road, Xuhui District, Shanghai, China, 200235 TEL : +86 021-33680011 FAX : +86 755 83698064	ELECOM Singapore Pte. Ltd Blk 10, Kaki Bukit Avenue 1, #02-04 Kaki Bukit Industrial Estate, Singapore 417942 TEL : +65 6347 – 7747 FAX : +65 6753 – 1791

Unauthorized copying and/or reproducing of all or part of this manual is prohibited.
The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
When exporting this product, check the export regulations for the country of origin.
Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
Company names, product names, and other names in this manual are either trademarks or registered trademarks.

A customer who purchases outside Japan should contact the local retailer in the country of purchase for inquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for inquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements willbe made under the stipulation of the Elecom warranty, but are not available from outside of Japan.