ELECLINK DC-309-6 Solar Pathway Lights
INTRODUCTION
For outdoor lighting, the ELECLINK DC-309-6 Solar Pathway Lights are the ideal combination of style, energy efficiency, and usefulness. With their timeless black finish and warm white LED radiance, these lights, which were introduced by ELECLINK in early 2025, are intended to improve any garden, sidewalk, or landscape. They cost $40.99 for a pack of six and have improved filament LEDs that produce a powerful 800 lumens, which can illuminate for up to 12 hours after a full charge. With an IP65 waterproof rating, they are made to survive the weather using sturdy ABS and polycarbonate. They provide simple setup and daily convenience with two adjustable height options, automated on/off capabilities, and no wire needed. These lights are a dependable and fashionable option for any outdoor area, whether you’re lighting a calm backyard walkway or enhancing the beauty of your garden décor.
SPECIFICATIONS
Brand | ELECLINK |
Model | DC-309-6 |
Color | Black |
Material | Acrylonitrile Butadiene Styrene, Polycarbonate |
Style | Classic |
Light Fixture Form | Path |
Lighting Method | LED |
Light Color | Warm White |
Brightness | 800 Lumens |
Efficiency | High Efficiency |
Bulb Base | E26 |
Switch Type | Push Button |
Power Source | 100% Solar Powered (No Wiring Required) |
Voltage | 12 Volts (DC) |
Charging Time | 6–8 Hours |
Working Time | Up to 12 Hours |
Water Resistance Level | IP65 Waterproof (Water Resistant) |
Shape | Cylinder |
Installation | Easy Installation with Auto On/Off |
Height Options | Two Height Options Available |
Warranty | One Year Warranty |
Theme | Garden Decor, Outdoor, Waterproof, Walkway Decoration |
Included Components | 6 Solar Lights, 12 Poles, 6 Garden Stakes, 1 User Manual |
Item Weight | 5.18 Pounds |
Unit Count | 6 Pieces |
Price | $40.99 |
FEATURES
- Powered entirely by solar energy: No external power source or wiring is required.
- LED Lighting Method: For brighter illumination, use high-efficiency filament-style LED bulbs.
- Improved Super Bright Output: Each light can provide up to 800 lumens of brightness.
- IP65 Waterproof: Made to resist inclement weather, including rain and snow.
- Classic Style Design: The timeless black cylindrical shape enhances the beauty of the outdoors.
- Two Height Options: For a flexible display, adjust the height using the provided poles.
- Auto-On/Off Functionality: Automatically turns on at nightfall and off at sunrise.
- Long Working Time: After a full charge, it can provide light continuously for up to 12 hours.
- Fast Charging: When exposed to direct sunlight, it charges completely in 6–8 hours.
- Sturdy Materials: Polycarbonate and Acrylonitrile Butadiene Styrene were used in the construction to ensure longevity.
- Push-Button Switch: When necessary, a push-button switch allows for simple manual operation.
- Versatile Use: Perfect for roads, walks, gardens, and pathways.
- E26 Bulb Base: A common base for simple upgrades or maintenance.
- Light Color: Produces a comfortable atmosphere with its warm white radiance.
- Complete Kit Included: Six lights, twelve poles, six garden pegs, and a user manual are all included.
SETUP GUIDE
- Carefully Unpack: Take everything out of the box.
- Assemble the Poles: Depending on the desired height, use one or two poles and connect them to the lights.
- Attach Stakes: Fasten the garden stakes to the pole assembly’s base.
- Peel Off Solar Film: Take off any protective film that may be on the solar panels.
- Pick a Spot: Pick an area that receives at least six hours of direct sunlight.
- Push into Ground: Make sure the stakes are stable and positioned upright by pushing them into the ground.
- Turn On Lights: Before using the solar lights for the first time, press the push button to turn them on.
- Initial Charge: Before using the lights for the first time at night, let them charge for a full day in the sun.
- Lighting Spacing: For best coverage and aesthetics, space lights 6 to 8 feet apart.
- Avoid Shading: Make sure that no buildings or plants are blocking the solar panels’ view.
- Angle for Sunlight: For most effectiveness, place the panels facing the sun.
- Use the Complete Kit: To improve landscape or walkway lighting, install all six lights.
- Test Functionality: To make sure the light is turned on, cover the solar panel during the day.
- Check for Stability: Make sure pegs are buried deep in the ground and poles are securely fastened.
CARE & MAINTENANCE
- Clean Solar Panels: Once a month, wipe them off with a moist cloth to get rid of dust and debris.
- Check for Dirt Buildup: For best charging performance, keep panels clear.
- Examine After Storms: After severe weather, check for physical damage or water.
- Tighten Connections: Make sure stakes and poles are fastened on a regular basis.
- Replace Battery if Needed: Change the internal rechargeable battery if the lights go out or become dim.
- Store During Severe Weather: Take out and store lights indoors during severe storms or snowfall.
- Use Gentle Cleaners: Steer clear of harsh chemicals and clean with only gentle soap and water.
- Verify Auto-On Sensor: Make sure it isn’t obstructed or soiled.
- Try Light Response: To make sure the dusk-to-dawn function is functioning, try it sometimes.
- Secure in Loose Soil: If lights start to wobble, reinforce the base with packed soil.
- Avoid Scratches: Use a gentle cloth to clean the panel to prevent scratches.
- Pre-Charge Before Storage: Make sure solar lights are fully charged before storing for long periods.
- Avoid Lawn Equipment: Keep mowers and trimmers away from solar lights.
- Polish Light Lens: To preserve light purity, periodically clean the lens.
TROUBLESHOOTING
Issue | Possible Cause | Solution |
---|---|---|
Light not turning on | Battery not charged | Place in direct sunlight for 6–8 hours |
Light flickers or dims | Low battery or partial sunlight | Ensure full-day sun exposure |
Light turns off after short time | Insufficient charging | Relocate to sunnier area |
Water inside light housing | Improper sealing or damage | Dry unit, check seal, replace if needed |
LED not lighting | Faulty bulb or battery | Contact manufacturer for replacement |
Lights turn on during daytime | Sensor malfunction | Clean sensor, ensure proper orientation |
One light not working | Loose connection or faulty unit | Check and reseat components, replace if needed |
Uneven brightness across lights | Inconsistent charging or battery issues | Rotate positions, charge fully |
Lights stay dim even after sunny day | Battery degradation | Replace rechargeable battery |
Switch not responding | Dirt or water around button | Clean and dry switch area |
PROS & CONS
Pros
- Super bright 800-lumen filament LED lighting
- IP65 waterproof and weather-resistant design
- Easy, wire-free installation with auto on/off feature
- Two height options for flexible decoration
- Long runtime up to 12 hours after full charge
Cons
- Requires full sunlight for optimal charging
- Not dimmable or colour-change capable
- A push button switch can be less intuitive
- No motion sensor feature
- Limited to warm white light only
WARRANTY
The ELECLINK DC-309-6 Solar Pathway Lights come with a One-Year Limited Warranty. This warranty covers manufacturing defects and performance issues under normal use. If any of the lights fail to operate properly within one year of purchase, customers are eligible for a replacement or refund, subject to terms and conditions provided by ELECLINK.
FREQUENTLY ASKED QUESTIONS
How long do the ELECLINK DC-309-6 Solar Pathway Lights stay illuminated at night?
The ELECLINK DC-309-6 lights can operate for up to 12 hours after a full charge of 6,8 hours under direct sunlight, offering extended nighttime illumination.
Do I need to wire anything during installation of the ELECLINK DC-309-6 lights?
No wiring is required. The ELECLINK DC-309-6 Solar Pathway Lights are 100% solar-powered and can be easily installed using the included stakes and poles.
What type of light do the ELECLINK DC-309-6 Solar Pathway Lights emit?
These lights emit a warm white LED glow, ideal for creating a cozy and welcoming atmosphere in gardens and walkways.
How do I switch on the ELECLINK DC-309-6 Solar Pathway Lights?
Each unit has a push-button switch under the cap. Turn it on during initial setup; the auto on/off function will handle dusk and dawn operation afterward.
Why are my ELECLINK DC-309-6 lights not turning on at night?
Ensure the switch is turned ON.Check if the solar panel is clean and positioned to receive direct sunlight.Make sure the battery is fully charged (place it in direct sun for 6–8 hours).Try covering the solar panel completely to test if the light turns on.
How many lights are included in one pack of ELECLINK DC-309-6?
One package includes 6 solar pathway lights, each with its own pole and garden stake.
Can I replace the LED bulb in the ELECLINK DC-309-6 unit?
The filament-style LED bulbs are built-in and non-replaceable, designed for long-term use without the need for maintenance.