VAXEE XE v2 Wireless User Guide

Contents of Package

• Mouse
• 4K Wireless Dongle
• Charging and Data Cable

Setup

Wired Mode

Connect the mouse to any USB port on your PC using the charging cable.

Wireless Mode

Connect the 4K dongle (VXDO2) through the cable to the computer.

Mouse Features

1. Left Button

2. Right Button

3. Middle Button

4. Back Button

5. Forward Button

6. Bottom Button

7. Power Switch

Specifications

• DPI Settings: 400/800/1600/3200 dpi
• Adjustable USB Report Rate: 500/1000/2000/4000 Hz
• Adjustable Click Latency: 0ms/2ms/4ms
• Adjustable Competitive Mode: On/Off
• Adjustable Motion Sync: On/Off
• Battery Life: Standard 110 hours / Competitive Mode 38 hours
• Charging Speed: 0%-100% in roughly 1 hour 50 minutes
• Weight: 58-59 g
• Sensor: PAW3950
• Connector: USB
• Buttons: 7 buttons
• Cable Length: 2 meters (6.6 feet)

Recommended Usage Environment

For optimal wireless performance, use the mouse within 20cm of the Wireless Dongle and further than 2m from sources of 2.4GHz interference (such as Wi-Fi routers).

[Icon: distance] 20cm

[Icon: distance] 200cm

Charging and Power LED Lights

Hold the Right Button (2) + Middle Button (3) to display the current charge level of the mouse.

• 100%-61%: Green Light On
• 60%-21%: Blue Light On
• 20%-10%: Red Light On
• <10%: Red light blinking

Charging: Blue light blinks in a cycle.

Fully Charged: Green light stays on.

Connect the USB cable to use it in wired mode.

DPI Adjustment

Hold the bottom button for 2 seconds, and the indicator will flash in cycles between DPI/Report Rate/Click Latency modes.

After selecting DPI mode (release the bottom button when switched to DPI mode), the indicator light changes from flashing to steady.

Pressing the button again at this point will cycle through the settings in the order of "Red (400dpi) -> Purple (800dpi) -> Blue (1600dpi) -> Green (3200dpi)".

[Diagram: DPI settings with color indicators]

• 400 dpi (Red)
• 800 dpi (Purple)
• 1600 dpi (Blue)
• 3200 dpi (Green)

Report Rate Adjustment

Hold the bottom button for 2 seconds, and the indicator will flash in cycles between DPI/Report Rate/Click Latency modes.

After selecting Report Rate mode (release the bottom button when switched to Report Rate mode), the indicator light changes from flashing to steady.

Pressing the button again at this point will cycle through the settings in the order of "4000Hz -> 2000Hz -> 1000Hz".

[Diagram: Report Rate settings]

• 4000 Hz
• 2000 Hz
• 1000 Hz

Click Latency Adjustment

Hold the bottom button for 2 seconds, and the indicator will flash in cycles between DPI/Report Rate/Click Latency modes.

After selecting Click Latency mode (release the bottom button when switched to Click Latency mode), the indicator light changes from flashing to steady.

Pressing the button again at this point will cycle through the settings in the order of "0ms -> 2ms -> 4ms".

[Diagram: Click Latency settings with color indicators]

• Red - 0ms
• Blue - 2ms
• Green - 4ms

Competitive Mode Adjustment

Hold the "Left Button" + "Forward Button" while the power is off.

While holding, turn the power on.

• Competitive Mode On: The MS indicator (red) blinks 3 times and goes off. (Default)
• Competitive Mode Off: The MS indicator (green) blinks 3 times and goes off.

Lift-off Distance Adjustment

Hold the "Middle Button" + "Forward Button" while the power is off.

While holding, turn the power on.

• Low mode: The Report rate (red) indicator blinks 3 times and goes off. (Default)
• High mode: The Report rate (green) indicator blinks 3 times and goes off.

Motion Sync Adjustment

Hold the "Right Button" + "Forward Button" while the power is off.

While holding, turn the power on.

• Motion Sync On: DPI light blinks in green for 3 times and goes off.
• Motion Sync Off: DPI light blinks in blue for 3 times and goes off. (Default)

Displaying Mouse Status

Hold the Forward button + Back button + Middle button.

Indicator lights on the bottom will show the current status of the mouse.

• DPI Indicator: Green Light ON - Motion Sync On; Blue Light ON - Motion Sync Off
• Click Latency Indicator: Red light on - Competitive Mode On; Green light on - Competitive Mode Off
• Report Rate Indicator: Red light on - Lift of Distance (Low); Green light on - Lift of Distance (High)

Regulatory

FCC Approval

Tested in accordance with the FCC Part 15 Subpart B Regulation and CISPR22 Class B device compliance procedures.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Installation

Follow the instructions provided.