BIG SOFA

Estimated assembly time: ⏱️ 15 min

Number of people required: ? x2

Package content: ? Coli 2

Parts Overview

The following parts are included in the package:

Hardware:

• ? A x4
• ⚪ B x4
• ⚪ C x2
• ? D x14 (5x35mm screws)
• ⚪ E x18

Assembly Steps

Step 1: Attach Feet to Sofa Base

Attach the feet (B) to the underside of the sofa base (2) using screws (D) and washers (E).

Visual description: The image shows the sofa base (2) upside down. Four feet (B) are to be attached to the corners using screws (D) and washers (E). A close-up shows a screw (D) passing through a washer (E) and into the foot (B), which is then screwed into the base.

Step 2: Attach Sofa Base to Sofa Frame

Connect the sofa base (2) to the main sofa frame (1) using screws (D) and washers (E).

Visual description: The image shows the sofa frame (1) with the base (2) being attached. A close-up shows a screw (D) passing through a washer (E) and into the frame, securing the base.

Step 3: Assemble Sofa Backrest

Place the sofa backrest (3) onto the sofa frame (1).

Visual description: The image shows the backrest (3) being lowered onto the main sofa body (1). Arrows indicate the direction of placement.

Step 4: Attach Side Panels

Attach the side panels (4 and 5) to the sofa frame using screws (D) and washers (E).

Visual description: The image shows two side panels being attached to the sofa. A close-up shows screws (D) and washers (E) being used to secure a cylindrical part (A) to the side panel.

Step 5: Connect Side Panels to Sofa

Connect the side panels (4 and 5) to the main sofa body (1).

Visual description: The image shows the side panels (4 and 5) being attached to the sofa body (1). Arrows indicate the connection points and the method of attachment, likely involving slots and screws.

Step 6: Place Cushions

Arrange the large cushions (6) and small cushions (7) on the sofa.

Visual description: The image shows the large cushions (6) being placed on the sofa, followed by the smaller cushions (7).

Step 7: Final Cushion Arrangement

Arrange the remaining cushions (6 and 7) for the final look.

Visual description: The image shows the remaining cushions being placed on the sofa.

Step 8: Place Seat Cushion

Place the main seat cushion (1) onto the sofa base.

Visual description: The image shows the large seat cushion (1) being placed on the sofa. A red 'X' symbol over a person sitting on the sofa indicates a warning against sitting on it during this step.

Step 9: Secure Backrest

Ensure the backrest (3) is properly in place on the sofa frame (1).

Visual description: The image shows the backrest (3) being adjusted on the sofa. A red 'X' symbol over a person standing on the sofa indicates a warning against standing on it.

Step 10: Final Check

The sofa is now assembled.

Visual description: The image shows the fully assembled sofa.