GODOX DP800III

Godox DP800III Strobe Flash Instruction Manual

Model: DP800III

Εισαγωγή

This instruction manual provides detailed information on the safe and effective use of your Godox DP800III Strobe Flash. Please read this manual thoroughly before operating the unit to ensure optimal performance and to prevent damage. Keep this manual for future reference.

The Godox DP800III is a professional studio flash designed for various photography applications, including wedding, advertising, portrait, and fashion photography. It features an 800Ws flash tube, built-in 2.4G wireless X system, Bowens mount compatibility, and a fast recycling time.

Προφυλάξεις ασφαλείας

  • Να βεβαιώνεστε πάντα ότι η τροφοδοσία ρεύματος είναι ενεργοποιημένη.tage matches the unit's requirements (110V for this model).
  • Do not operate the flash unit in wet conditions or expose it to rain or moisture.
  • Avoid touching the flash tube or modeling lamp immediately after use, as they can be extremely hot.
  • Do not disassemble or modify the unit. Repairs should only be performed by authorized service personnel.
  • Κρατήστε τη μονάδα μακριά από εύφλεκτα υλικά.
  • Βεβαιωθείτε ότι υπάρχει κατάλληλος αερισμός γύρω από τη μονάδα κατά τη λειτουργία για να αποτρέψετε την υπερθέρμανση.
  • Unplug the unit from the power outlet before cleaning or when not in use for extended periods.

Προϊόν Πάνωview

Βασικά Χαρακτηριστικά

  • 800Ws Strobe Light: Provides powerful and consistent illumination for professional photography.
  • Built-in 2.4G Godox Wireless X System: Enables wireless triggering and control with compatible Godox X system transmitters (e.g., X2, XPro, XT32, FT-16).
  • Γρήγορος χρόνος ανακύκλωσης: Achieves a 1-second recycling time at full power, improving shooting efficiency.
  • Accurate Color Temperature: Maintains stable color temperature for consistent results.
  • Wide Power Output Range: Offers 61 steps of power output from 1/64 to 1/1.
  • Multiple Modeling Lamp Λειτουργίες: Features OFF, PROP (proportional), and Percentage modes for the modeling lamp.
  • Ευφυής Μνήμη: Automatically recovers the last adjusted settings upon restart.
  • 99 Wireless ID Settings: Minimizes interference from other nearby wireless systems.
  • Όρος Μπόουενς: Compatible with a wide range of Bowens mount light modifiers.

εξαρτήματα

Godox DP800III Strobe Flash front view

Εικόνα 1: Εμπρός view of the Godox DP800III Strobe Flash, showing the flash tube and Bowens mount.

Godox DP800III Strobe Flash rear control panel

Εικόνα 2: Οπισθεν view of the Godox DP800III Strobe Flash, highlighting the control panel with LCD display and various buttons.

Godox DP800III Strobe Flash overview με χαρακτηριστικά

Εικόνα 3: Υπερview of the Godox DP800III Studio Flash Light, illustrating its key features including 800W flash tube, 2.4G Wireless X System, and Bowens Mount.

Godox DP800III Strobe Flash control panel detail

Εικόνα 4: Λεπτομερής view of the control panel, showing the sync port, USB port, and S1/S2 optical slave trigger buttons.

Ρύθμιση

Αποσυσκευασία και αρχικός έλεγχος

Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

Godox DP800III Strobe Flash contents

Εικόνα 5: Contents of the Godox DP800III package, typically including the strobe unit, power cable, and protective cap.

Mounting the Flash Unit

  1. Attach the flash unit to a sturdy light stand using the mounting bracket. Ensure the locking knob is securely tightened.
  2. Remove the protective cap from the flash tube.
  3. If using a light modifier (e.g., softbox, reflector), align its Bowens mount with the flash unit's mount and rotate until it locks into place.

Σύνδεση ρεύματος

  • Connect the power cable to the AC input port on the rear of the flash unit.
  • Plug the other end of the power cable into a suitable 110V AC power outlet.

Οδηγίες Λειτουργίας

Ενεργοποίηση/Απενεργοποίηση

To power on the unit, flip the power switch located on the rear control panel to the "ON" position. The LCD display will illuminate. To power off, flip the switch to the "OFF" position.

Ρύθμιση ισχύος φλας

Περιστρέψτε το ΣΕΙΡΑ dial on the control panel to adjust the flash power output. The power can be set from 1/64 to 1/1 in precise increments. The current power setting will be displayed on the LCD screen.

Godox DP800III Strobe Flash LCD display showing power settings

Εικόνα 6: The LCD display showing flash power settings, adjustable via the SET dial.

Μοντελοποίηση Lamp Ελεγχος

Πατήστε το ΜΟΝΤΕΛΟ button to cycle through the modeling lamp τρόπους λειτουργίας:

  • OFF: Μοντελοποίηση lamp είναι απενεργοποιημένο.
  • PROP (Αναλογικό): Μοντελοποίηση lamp brightness adjusts proportionally to the flash power setting.
  • Ποσοστόtage: Μοντελοποίηση lamp brightness can be set to a specific percentage.

Wireless X System Operation

The DP800III features a built-in 2.4G Godox Wireless X System for remote control.

  1. Ρύθμιση ομάδας και καναλιού: Πατήστε το GR/CH button to switch between group and channel settings. Rotate the ΣΕΙΡΑ dial to select the desired group (0-9, A-F) and channel (1-32). Ensure your Godox X system transmitter is set to the same group and channel.
  2. Setting Wireless ID: Πατήστε το C.Fn button to access custom functions, then navigate to the wireless ID setting. Rotate the ΣΕΙΡΑ dial to select an ID from 01-99. This helps prevent interference when multiple Godox systems are in use nearby.
  3. Λειτουργίες οπτικής υποτελούς μονάδας (S1/S2): Πατήστε το S1/S2 button to activate optical slave modes.
    • Λειτουργία S1: The flash will fire in response to a single flash from another manual flash.
    • Λειτουργία S2: The flash will ignore the pre-flash of a TTL flash and fire on the main flash.
Godox DP800III Strobe Flash wireless ID, channels, and groups settings

Εικόνα 7: Display showing the settings for Wireless ID (01-99), 32 Channels, and 16 Groups for the Godox Wireless X System.

Godox DP800III Strobe Flash compatibility with X system triggers

Εικόνα 8: The DP800III Strobe Flash shown with various compatible Godox X system triggers, including the X1, XT32, and V860II.

Test Flash and Recycle Time

Πατήστε το ΔΟΚΙΜΗ button to fire a test flash. The unit will then begin recycling. The recycle indicator will light up when the unit is ready to fire again. The DP800III boasts a fast recycle time of approximately 1 second at full power.

Godox DP800III Strobe Flash with 0.3-1s recycle time

Εικόνα 9: Illustration highlighting the rapid 0.3-1 second recycle time of the Godox DP800III, crucial for timely shooting.

Συντήρηση

  • Καθάρισμα: Χρησιμοποιήστε ένα μαλακό, στεγνό πανί για να καθαρίσετε το εξωτερικό της μονάδας φλας. Για επίμονη βρωμιά, ένα ελαφρώςamp Μπορείτε να χρησιμοποιήσετε ένα πανί και στη συνέχεια ένα στεγνό πανί. Μην χρησιμοποιείτε διαλύτες ή λειαντικά καθαριστικά.
  • Σωλήνας λάμψης: The flash tube is a consumable part. If it becomes discolored or fails to fire, it may need replacement. Consult an authorized service center for flash tube replacement.
  • Αποθήκευση: When not in use, store the flash unit in a cool, dry place, away from direct sunlight and excessive humidity. Reattach the protective cap to the flash tube.
  • Αερισμός: Regularly check that the ventilation openings are clear of dust and debris to ensure proper heat dissipation.

Αντιμετώπιση προβλημάτων

ΠρόβλημαΠιθανή αιτίαΔιάλυμα
Η μονάδα φλας δεν ενεργοποιείται.Power cable not connected; power outlet faulty; unit malfunction.Check power cable connection; try a different outlet; contact service center.
Το φλας δεν ανάβει.Unit not recycled; trigger not working; flash tube faulty.Wait for recycle indicator; check trigger connection/settings; contact service center.
Η ασύρματη ενεργοποίηση αποτυγχάνει.Incorrect group/channel/ID; distance too far; interference.Verify group, channel, and ID settings on both flash and transmitter; reduce distance; change wireless ID.
Μοντελοποίηση lamp δεν λειτουργεί.Lamp mode set to OFF; lamp ελαττωματικός.Ελέγξτε τη μοντελοποίηση lamp mode setting; contact service center for replacement.

Προδιαγραφές

ΧαρακτηριστικόΠροσδιορισμός
ΜοντέλοDP800III
Ισχύς φλας800 Ws
Εύρος Ισχύος Εξόδου1/64 - 1/1 (61 steps)
Ανακύκλωση χρόνουApprox. 1 second (at full power)
Διάρκεια Flash1/2000 - 1/800 δευτ.
Θερμοκρασία χρώματοςΣταθερός
Ασύρματο σύστημαBuilt-in 2.4G Godox Wireless X System
Ασύρματες Ομάδες16 (0-9, A-F)
Ασύρματα κανάλια32 (1-32)
Ασύρματο αναγνωριστικό99 (01-99)
Μοντελοποίηση Lamp ΛειτουργίεςOFF / PROP / Percentage
Τύπος βάσηςΌρος Μπόουενς
Είσοδος ισχύος110V AC (US version)
Βάρος αντικειμένου10.78 λίβρες (περίπου 4.89 κιλά)
Διαστάσεις συσκευασίας17.75 x 11 x 8.5 ίντσες (περίπου 45.09 x 27.94 x 21.59 εκ.)

Σημείωμα: Οι προδιαγραφές υπόκεινται σε αλλαγές χωρίς προειδοποίηση.

Εγγύηση και υποστήριξη

Για πληροφορίες εγγύησης και τεχνική υποστήριξη, ανατρέξτε στην κάρτα εγγύησης που συνοδεύει το προϊόν σας ή επισκεφθείτε την επίσημη ιστοσελίδα της Godox. webΜπορείτε επίσης να επικοινωνήσετε με τον τοπικό σας αντιπρόσωπο για βοήθεια.

Κατασκευαστής: GODOX

© 2026 GODOX. Με επιφύλαξη παντός δικαιώματος.