effydesk logo

Instruction Manualeffydesk Height Adjustable Electric Standing Desk

Technical Data

Segment Column 3 Input Voltage 100-240V
Maximum Load 300 lbs Speed 35mm/s
Recommend Load < 240 lbs Certification UL
Height Range 600-1250mm

Accessory List

effydesk Height Adjustable Electric Standing Desk - Accessory List

Tool Required

effydesk Height Adjustable Electric Standing Desk - Tool Required

Parts List

effydesk Height Adjustable Electric Standing Desk - Parts List

Thank you for your order!
If you have any issues with your product, please feel free to contact us via [email protected] or [email protected]  We will help you resolve the issue as soon as possible.
For more information, please visit https://effydesk.ca/pages/how-to-assemble-your-height-adjustable-standing-des

STEP1  Separate the Crossbar ⑧ and you will find the Crossbar Rail inside.
effydesk Height Adjustable Electric Standing Desk - STEP 1STEP 2

Insert one of the Crossbar Ends into one of the Lifting Columns ③ and secure it with screws.
Repeat the same step for the other Lifting Column

effydesk Height Adjustable Electric Standing Desk - STEP 2

STEP 3

Attach the Side Bracket ⑥ to one of the Lifting Columns.
Repeat the same step for the other Lifting Column

effydesk Height Adjustable Electric Standing Desk - STEP 3

STEP 4

Slide the two Crossbar Ends back into the Crossbar Rail.
Please make sure to fit the slots as shown below.

effydesk Height Adjustable Electric Standing Desk - STEP 4

Note: Please make sure the circular holes are facing inwards as shown below.effydesk Height Adjustable Electric Standing Desk - STEP5

STEP 5
Attach both Feet ④ to the bottom of the Lifting Columns.
effydesk Height Adjustable Electric Standing Desk - STEP6STEP 6
For small/ medium tabletops, use the screws to tighten the Hangers onto the Crossbar.
For large tabletops, use the screws to tighten the Hangers onto the Crossbar.

effydesk Height Adjustable Electric Standing Desk - STEP 7

Note: The screws do not go through the Crossbar. Hangers, Allen Key, and screws are found in a separate bag.

STEP 7
Install the tabletop (Predrilled / Non-predrilled).
effydesk Height Adjustable Electric Standing Desk - STEP7Note: Please do not over-tighten the screws.

STEP 8
Firmly secure the Crossbar with Screws (H) and connect all the cables to the Control Box ①.
effydesk Height Adjustable Electric Standing Desk - STEP8Note: Use Zip Ties (D) to secure cables under the table.
STEP 9
Attach the Cable Tray ⑨ to the Hangers with screws.effydesk Height Adjustable Electric Standing Desk - STEP9

STEP 10
Attach the Keypad ⑦ with Screws (F) to the tabletop.
effydesk Height Adjustable Electric Standing Desk - STEP10

STEP 11
Plug the cable from the Keypad into the Control Box and flip the table onto its feet.effydesk Height Adjustable Electric Standing Desk - STEP11

Note: The Control Box is equipped with a gyro sensor so the table and the Control Box must be level in order to work properly or else it will not move up and down.

Prepare for First-time Use

effydesk Height Adjustable Electric Standing Desk - STEP12

Before plugging in the table, make sure that

  • The Lifting Columns are level and set at their lowest position.
  • All the screws are tightened to avoid the desk becoming wobbly.
  • There is no object above or beneath the desk within its range of movement as it may result in physical damage.

Calibrate the desk by following the steps below:

  • Please press the Down button and hold for 10-15 seconds until the table stutters and beeps.
  • Release the button. Your desk is ready to use!

Operation Guide

Program Presets

  • Adjust the table to the desired height, then press M.“S-“ will flash on the display.
  • Press a number to set the desired height as a preset.

effydesk Height Adjustable Electric Standing Desk - STEP13

Advanced Safety Feature: Lock and unlock the table

  • Press the Up and Down buttons at the same time for 5 seconds, until “LOC” appears on the display.
  • All buttons will be inactivated and no change can be made.
  • Press the Up and Down buttons together again to unlock the Keypad and all of the table’s features.
    effydesk Height Adjustable Electric Standing Desk - STEP14

Set Maximum Height Limit

  • Raise the desk to the desired maximum height.
  • Press M and the Up button together for 5 seconds until you hear a beep. This sets the maximum height limit.

Set Minimum Height Limit

  • Lower the desk to the desired minimum height.
  • Press M and the Down button together for 5 seconds until you hear a beep. This sets the minimum height limit.

Changing from centimeters to inches

  • Press M for 10 seconds and the Keypad will display “1-1”.
  • Press the Down button and it will change to “1-0”.
  • Press M for 10 seconds to lock the setting.

Reset the table
When an error code or “RST” appears on the display, please reset the table.

  • Unplug the power cord from the Control Box.
  • Unplug the cable that connects the Keypad to the Control Box.
  • Wait 30 minutes and plug all the cables back in again.
  • Press the Down button and hold for 10-15 seconds until the table stutters and beeps.
    effydesk Height Adjustable Electric Standing Desk - Reset the table

If“HOT” appears on the display

  • Please unplug and replug and let it cool off for a couple of minutes before proceeding.
    effydesk Height Adjustable Electric Standing Desk - displayeffydesk logo

If you have any questions, please contact us at
[email protected] or [email protected]
www.effydesk.ca

Documents / Resources

effydesk Height-Adjustable Electric Standing Desk [pdf] Instruction Manual
Height-Adjustable Desk, Electric Standing Desk, Standing Desk, Desk

References

Leave a comment

Your email address will not be published.