USE AND CARE GUIDE
Wireless Controlled Smart Bulb
THANK YOU
We appreciate the trust and confidence you have placed in EcoSmart through the purchase of this bulb. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing EcoSmart!
Operation
1 Download the Hubspace™ app from the App Store or the Google Play Store.
2 Sign in, or tap Register to create a Hubspace account.
3 To add your bulb, tap the `+’ button in the upper-right corner.
NOTE:
- Bluetooth access is required for product setup.
- Each smart Hubspace bulb must be added individually by scanning the QR code or by following the instructions for manual set up.
- Manual instructions can be found in the app or under step 8 of this product manual.
- Scanning the QR code is the fastest method for set up.
- QR code must be scanned from inside the Hubspace app.
4 Scan the QR code printed on either the bulb or Quick Start Guide.
NOTE:
- QR code must be scanned from inside the Hubspace app.
- If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
- If you are unable to access the QR code, on the Scan Product screen, tap the Search button in the lower-right corner and follow the instructions.
- If you cannot locate the QR code or are having trouble scanning the QR code, please follow instructions for manual set up.
- Manual set up instructions are under step 8 of this product manual.
5 Connect your bulb to power and follow the instructions on app screen.
NOTE:
- This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide.
- The Hubspace app will only show Wi-Fi networks compatible with this bulb.
- If you do not see your Wi-Fi network name when you attempt to connect your bulb, please check your router settings or move your product closer to your Wi-Fi router.
6 Control your lighting using the Hubspace app
- Control Dimming: choose the brightness you want in the app.
- Change Colors: Select from shades of white or full color spectrum.
- Group Control: group bulbs so they can be controlled at one time.
* Set up groups by tapping the “+” sign on the home screen and select “set up group”. Follow the instructions in the app.
* Groups can also be set up by setting up rooms. Select “rooms” from the home screen and follow the instructions in the app. - Create Schedules: program bulbs to turn on and off automatically.
* Select Schedules from the home screen. Follow the steps in the app to create schedules.
7 Set up your Voice Assistant
You can connect your smart bulb to Google Assistant and Alexa from the Hubspace app. Or, you can sign in to Alexa app or Google Assistant and connect to your Hubspace products from there.
8 Manual Set up
If you cannot locate the QR code or are having trouble scanning the QR code, follow below instructions:
- Power on the bulb.
- Tap the `+’ button in the upper right corner on app screen to add your bulb.
- Tap the Search button in the lower right hand corner and follow the directions in the Hubspace App.
NOTE: QR code must be scanned from inside the Hubspace app.
Troubleshooting Guide
| Problem | Solution |
| My Hubspace product is not connecting to Wi-Fi. | Make sure your product is connected to a power source. Your internet connection or Wi-Fi network may be down. |
| My product cannot nd any Wi-Fi networks. | Make sure you have a 2.4GHz capable Wi-Fi network within range of the product you are trying to add. |
| My product is in a location that does not have Wi-Fi. Can I still use it with the Hubspace app? | Yes. Use the app on a phone with an internet connection like LTE. The phone must be within Bluetooth range of your Hubspace product. |
| I cannot nd the QR code. | It is on the bulb housing. A copy of the QR code is also included in your product’s documentation. |
| The QR code has become damaged. How do I add the product? | Under the QR code are numbers. You can enter those in manually instead of scanning the code. |
| The QR code will not scan. | The QR code must be scanned from inside the Hubspace app. If still unable to scan, please follow instructions for manual set up under step 8 of this product manual. |
| I lost my QR code. How do I add a product? | Make sure the product is connected to power. In the Hubspace app, tap +, then Add Product. On the Scan Product screen, tap the Search button in the lower-right corner. Follow the instructions on-screen. |
| A product is on another account. How do I transfer it? | Scan the QR code and it will transfer to your account. |
| My product is offline for long periods of time. | Make sure your Wi-Fi signal strength is sufficient. You may need to move your router, use mesh Wi-Fi, or Wi-Fi extenders. |
| The product is on and I scanned the QR code, but the app cannot connect to it. | Turn off Bluetooth on your phone and turn it back on. Then, scan the QR code. If the problem persists, turn your phone off and on, then try again. |
| Can I scan the same QR code to add multiple products? | No. Each product has a unique QR code. |
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR§ 2.1077 Compliance Information
Unique Identifier:13G3060WRGBGD01
Responsible Party
Leedarson America. Inc.
300 Technology Court SE Suite 100; Smyrna, GA 30082
customerservice@leedarson.com
Contains FCC ID:2AB2Q14CG500SG
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
RSS Regulations
This device comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating an conjunction with any other antenna or transmitter.
Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-592-5233
HOMEDEPOT.COM/Hubspace
Retain this manual for future use.
Documents / Resources
 |
ecosmart Wireless Controlled Smart Bulb App [pdf] User Guide 14CG500SG, 2AB2Q14CG500SG, Wireless Controlled Smart Bulb App, Controlled Smart Bulb App, Smart Bulb App, Bulb App, App |