EasySMX Game Controllers Drivers

Download product drivers for EasySMX Game Controllers

1. Driver for Game Controllers

Download Here
* The driver only supports windows system.
* The driver only serve purpose when the USB driver on your PC has trouble updating.
Compatible Gamepads ↓
ESM 4108| ESM 9101 |ESM 9110 |ESM 9100 |ESM 9013 |KC 8236 |SP5226 |ESM 8587

2. Driver for Mice

Download Here
*The driver only works for PC.Mac book is supported.

3.Driver for Gaming Headsets

V07D/VIP002D Driver
Download Here

G18 (7.1) Driver
Download Here

How to configure V18 game mouse :

 

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. t37 driver update

    Anonymous asks t37 driver update
    Manuals+ clarified question
    Question

    How can I update the drivers for the EasySMX T37 game controller?

    Answer

    To update drivers for EasySMX controllers, you should visit the official EasySMX website. While the T37 model is not explicitly listed in the current post's compatibility list, the general process for EasySMX gamepads is as follows:

    • Visit easysmx.com and navigate to the "Game Controllers" or "Download" section.
    • Download the driver package for game controllers. Note that these drivers are typically for Windows systems and are primarily used if your PC has trouble automatically updating the USB driver.
    • Once downloaded, right-click the software and select "Run as administrator" to begin the installation.
    • Follow the on-screen prompts to complete the setup.

    If you cannot find a specific driver for the T37, most EasySMX controllers are plug-and-play and use standard Windows HID drivers. If you are experiencing connectivity issues, try a different USB port or check the device manager to see if the controller is recognized as an "HID-compliant game controller."

  2. レシーバーをPCのUSBポートに接続し、2.4G(レシーバーのアイコン、右側の位置)にしてコントローラの電源を入れても接続できません。PCはレシーバを識別していますが、レシーバーとコントローラが接続できていないようです。どのようにすればよいでしょうか。

    Ikejima asks レシーバーをPCのUSBポートに接続し、2.4G(レシーバーのアイコン、右側の位置)にしてコントローラの電源を入れても接続できません。PCはレシーバを識別していますが、レシーバーとコントローラが接続できていないようです。どのようにすればよいでしょうか。
    Manuals+ clarified question
    Question

    How do I connect my EasySMX 2.4G controller to my PC when the receiver is detected but the controller won't pair?

    Answer

    Hello, it sounds like your controller may need to be re-paired with its USB receiver. Please try these steps to force a new connection:

    1. Ensure the controller is fully charged or has fresh batteries.
    2. Plug the USB receiver into a USB port on your PC. If it's currently in a front port, please try using a port on the back of the computer.
    3. Press and hold the HOME button (the main logo button) on the controller for about 5-10 seconds.
    4. The LED indicator lights on the controller should begin to flash rapidly, which means it has entered pairing mode.
    5. The controller should then connect to the receiver, and one of the LED lights will become solid to indicate a successful connection.

    This procedure should resolve most connection issues. If the problem persists, please provide the specific model number of your controller for more detailed assistance.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.