Main user interface
A. Contact Charging point
B. Function Button
D. Charging USB Port
E. Charging Status LED
F. Power On/Off
a. Open Charging Dock case,
take out the earbuds
b. Automatic Pairing
For initial use, put two earbuds within 10cm, press and hold the buttons for 2s to turn on, the LEDs will flash for seveval seconds and waiting for pairing. when the LED of Right earbud flashes and Left earbud LED off it means twoearbuds successfully paired. (Voice Notice: Power on —>pairing —> TWS Connected)
c. Pairing with cellphone
Turn on cellphone bluetooth and set it as Open
detection, when “G11-JL-R” appears in available
devices, press to connect. The LED flash in
Blue continuously after connected.(please don’t
connect“G11-JL-L”when it appears）
(Voice Notice: Connected)
d. Power off
Press and hold 5s the function button for
either earbud, two earbuds will be powered
off at the same time (Voice Notice: Power off)
a. The LED flashes in Red and there is a
Voice Notice when the Battery Power Low.
b. Press the Power On/Off button before
c. Without external power, the charging dock to charge the earbuds, earbuds & right LED of
charging dock on in red, and will be off after
d. With external power to charge the charging
dock and earbuds, earbuds LED on in red,
Left LED of charging dock flashes in blue,
after fully charged, Earbuds LED off, Left
LED of charging dock on in blue.
a. Press the function button once to answer calls, Press Function Button twice to reject calls.
b .In music mode,Press function button once
to pause,Press Right function button twice
to play next song. Press Left function
button twice to play previous song.
d.Press and hold either function button for 2s
to activate Siri.
c.Press Right function button three times to
increase volume. Press Left function button
three times to decrease volume.
Right/Left earbud use individually
a. The earbuds can be used individually (each earbud pairs to separate cellphone)
b. Before using individually,please make sure to erase all existing“G11-JL”pairing record.
c. To use right earbud individually,press function button for 2s,the LED flash in blue,turn on cellphone bluetooth to
search,and connect when“G11-JL-R”available.After concected,the LED flashes in blue. (Voice Notice:Pairing—>connected)
d. To use left earbud individually,press function button for 2s,the LED flash in blue,turn on cellphone bluetooth to search,and connect when“G11-JL L”available.After concected,the LED flashes in blue. (Voice Notice:Pairing—>connected)
e. After used either earbud individually and want to use the
earbuds as one pair, please make sure to erase all existing
“G11-JL”in your phone before pairing again.
Default Setting recovery
1stly: make sure the earbuds don’t connect any bluetooth devices.
2ndly: put two earbuds close within 10cm and press & hold two function buttons for 2s. 3rdly: press the function button of the rightearbud twice,when Right LED flashes,
Left earbud LED off,auto pairing completed. 4thly: presss & hold either function button for 5s, two earbuds turn off at the same time, manual pairing completed
Product Name: G11-JL Operation range: 10m
Charging time: 1.5 hours Call time: 4 hours
Music Time: 3 hours Charging Input: 5V 300mA
Battery Type: Polymer Li-Ion Battery Earbud weight: 6g+6g
- Please make sure the product is fully charged before initial use.
- Please use the brand adaptor complying safety requirements to charge
- If your cellphone can not find “G11-JL-R”, please double check if your
cellphone Bluetooth is at “Equipment visible mode”. After initial pairing,
the earbuds will automatically pair for repeat use. If no use for a long
time, need to follow up pairing procedures to pair with the cellphone.
- If there is only one earbud has sound while in music mode, please
restart the earbuds or re-pair manually.
- Please use the product in the temperature between 0 C-45 C. When
the enviroment temperature is too high or low, it may cause the
- Please keep the product dry, do not contact water
or humidity enviroment
- Please do not drop, throw, pull/drag the product to prevent damage.
- Please power off before clean the product.
- Please use the product at proper volume while listening music or
answering call, long time at high volume usage could lead to
- permanent hearing loss.
- The built in battery is not dismountable, please do not replace by
yourself. If it’s really necessary, please ask help from authorized
- Please dispose the product according to local law, can not treat it as
- Without adult supervision, please keep the product out of reach of
children, the swallow of small components included may cause
- This product is covered under warranty for a period of oneyear from
the date of purchase limited to normal use and maintenance of the machine
parts, materials and functions. Problems and failures verified upon further
identification, will be provided free repair and replacement parts.
- Limited to the following:
A. Headset is beyond the warranty period;
B. User does not follow the instructions. so that the headphone wire and
C. Without the authorization to dismount, repair, alteration structures;
D. Can’t provide proof of purchase.
E. Man made damage.
F. Due to natural disasters and other force majeure (such as
earthquakes, fires) product failure of damage causes
User’s name ———————–
Date of purchase—————–
QC Report info
Read More About This Manual & Download PDF: