EagletVision BW4 Battery Camera
Packing list
- After opening the package, please confirm whether the accessories are complete.
- Battery Camera X1
- Data cable X1
- Screw Pack X1
- Base X1
- User Guide X1
Appearance
Product interface display
Electrical parameters:
- Input: 5V, 1.5A
- Battery Information: 3.7V, 5000mAh
Installation guide
- Choose a good location for your camera
- Please install the camera in a position where the field of view is not blocked, and ensure that the camera is within the coverage of the Wi-Fi network.
- Please install the camera in a position where the field of view is not blocked, and ensure that the camera is within the coverage of the Wi-Fi network.
- Mounting bracket
- Screw fixing
- Use a drilling tool to drill holes in the wall according to the hole spacing of the base. It is recommended to use a pencil to mark the holes in the wall before drilling. Screw the expansion nut into the hole on the wall, and then connect the bracket with the nut with screws to complete the fix.
- Adjust the angle
- Mount the camera on a magnetic stand and adjust the monitoring angle.
- Mount the camera on a magnetic stand and adjust the monitoring angle.
Indicator light
Battery camera reset
- When the battery camera is powered on, use the pin to toggle the reset button for 3-5 seconds, until the blue light flashes, and a prompt sound of “Please use the APP for WiFi configuration” is issued; that is, the reset is successful.
Device connection
- Download the APP
- Scan the QR code below to download and install the APP
- Scan the QR code below to download and install the APP
- Register and log in to the APP
- Please register for an APP account and log in.
- If you have already registered, please log in directly.
Connection method: One Click Connection
- Find the device ID and click on ‘Connect’
- Click “+Add,” and the page jumps to Figure 2.
- Find the device ID and click on ‘Connect’
- Find the device ID and click on ‘Connect’
- Select WiFi, enter the correct password, and click “Next.”
- Waiting for connection.
Connection method–Scan the QR code
- Click “+” to add the device.
- Scan the QR code on the camera label.
- Upon hearing a sound or seeing the indicator light flashing, check and click “Next.”
- Select WiFi, enter the correct password, and click “Next.”
- Align the QR code with the camera.
- Click on the input box, customize the device name, and click “Get started.”
- Click “Next” to check the “signal strength” of the installation location.
- If the signal is strong, click “Done.” If the signal is weak, find a location with good signal and click “Retry.
Device sharing
- With open permission of Device sharing, the person being shared can set the function of the device
- If the permission is turned off, you can only watch the video, and cannot set the function.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
IC Warning
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference,
- This device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-0021
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Warranty Card
- User name:———————————————-
- Address: ———————————————-
- Telephone: ———————————————-
- Fax: ———————————————-
- Post code: ———————————————-
- E-mail: ———————————————-
- Product model (Model): ———————————————-
- Product Number (S/N): ———————————————-
- Production Date: ———————————————-
- Purchase Date: ———————————————-
If you have other requirements, please fill in below:
- Dealer: ———————————————-
- Distribution unit: (seal) ———————————————-
- Telephone: ———————————————-
FAQ
How do I invite family and friends to use my camera together?
Open the APP and select your camera on the home page. Click Share in the camera settings to enter the sharing page, and a QR code will be automatically generated. Your friends can open the app and gain some access by scanning the QR code on their phone.
Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?
On Apple devices with iOS 13 and above, you need to turn on the Location Permission of the app in the system settings and change it to Allow while in use.
Will the camera display a red light after turning on the night vision function?
The built-in IR LED lights, when the night vision is turned on, the camera only displays some faint red lights, but the picture quality is still clear in a dark environment.
What are the requirements for Wi-Fi?
Support for 2.4GHz and 5GHz wireless networks. Please confirm whether the device supports 5G Wi-Fi. Also, set the Wi-Fi authentication method to WPA2-PSK or a lower level of security, and set a password
What should I do if the equipment fails?
Long-press the power button to restart the camera. If there is no response, you can open the USB silicone cover at the bottom of the camera, long-press the reset button to reset, and then long-press the power button to restart the camera.
How far should the camera be from the router?
After testing, the Wi-Fi connection distance can normally reach 150 meters in an open area. But the actual situation depends on the strength of the Wi-Fi and its surroundings; thick walls, electromagnetic devices, and large metal objects can all cause interference to the Wi-Fi signal. If the camera connection is weak or unstable, place the camera as close to the router as possible.
Can't add a camera for the first time?
When adding a camera for the first time, make sure the camera is powered on and the working status light is Blue and flashes slowly. Or hear please use the App for WiFi configuration from the camera. Make sure the WiFi account and password are correct. When adding a camera, ensure that the network is smooth, and it is recommended to operate close to the router. If the QR code network configuration is unsuccessful try to use the AP network configuration the mobile phone can be automatically added after connecting to the WiFi hotspot issued by the camera and returning to the App the password should not be set as complicated as possible, and it does not contain special characters such as If the two methods are still unable to connect to the Internet, it is recommended to restart the router and try again. Provide the nameplate label of the router.
TF card not recognized?
After inserting the TF card into the TF card slot of the camera, check whether the capacity of the TF card is displayed in the System Settings, TF Card Recording Settings of the device in the APP. If it prompts No TF card detected it means that the TF card recognition failed. Please use a brand TF card. The TF card can be recognized by the computer normally. Only the FAT32 format is supported. The recommended TF card capacity is between 2-128G. It is recommended to use a high-speed TF card of Class 4 and above. Try to insert and unplug the TF card several times. It is recommended to try another TF card. It may take some time for the camera to recognize the TF card. After inserting the card, wait for about 30 seconds before observing.
Statement
Operation of this device in the band 5150-5350 MHz is restricted to indoor use only.
Documents / Resources
 | EagletVision BW4 Battery Camera [pdf] User Manual 2BLVV-BW4, 2BLVVBW4, bw4, BW4 Battery Camera, BW4, Battery Camera, Camera |