dynamic BIOSENSORS heliXcyto Real Time Interaction Cytometry
Product Information
Specifications:
- Product Name: heliXcyto Cleaning Solution 3
- Order Number: CS-50-3
- Contents: Cleaning solution 3
- Amount: 50 mL
- Storage: Room temperature (RT)
- Handling: Handle with personal protection (gloves, goggles) and avoid direct skin contact. Rinse thoroughly with plenty of water in case of skin contact. Store in a dark, cool, and well-aired location. Avoid contact with acids.
- Intended Use: For research use only. Do not use heliXcyto trapping chips.
- Shelf Life: Limited shelf life, check the expiry date on the label.
Product Usage Instructions
Cleaning Process:
- Ensure the heliXcyto device is disconnected and ready for cleaning.
- Wear personal protective equipment including gloves and goggles.
- Apply the Cleaning Solution 3 (CS 3) to the maintenance chip of the heliXcyto device.
- Do not run the solution over heliXcyto trapping chips.
- Rinse the device thoroughly with plenty of water after cleaning with CS 3.
Follow-up Steps:
After using CS 3, follow up with RB 1 or another suitable buffer solution, or rinse thoroughly with water.
Frequently Asked Questions
Q: Can Cleaning Solution 3 be used on all parts of the heliXcyto device?
A: No, Cleaning Solution 3 is specifically for cleaning the maintenance chip of the heliXcyto device. Do not run it over trapping chips.
Q: How should I store Cleaning Solution 3?
A: Store Cleaning Solution 3 in a dark, cool, and well-aired location at room temperature. Avoid contact with acids.
Q: Can I use Cleaning Solution 3 for purposes other than maintaining a heliXcyto device?
A: No, Cleaning Solution 3 is intended for research use only and should be used solely for cleaning the specified device.
Product Description
- Order Number: CS-50-3
Table 1. Contents and Storage Information
| Material | Amount | Storage |
| Cleaning solution 3 | 50 mL | RT |
- Handle with personal protection (gloves, goggles) and avoid direct skin contact. Rinse thoroughly with plenty of water in case of skin contact.
- Store in a dark, cool, and well-aired location. Avoid contact with acids.
- For research use only.
- This product has a limited shelf life, please see the expiry date on the label.
Application Note
- The Cleaning Solution 3 (CS 3) is ready to use for cleaning a heliXcyto device on a maintenance chip.
- DO NOT run over heliXcyto trapping chips!
- Follow the use of CS 3 immediately with RB 1 or another suitable buffer or plenty of H2O.
Contact
- Dynamic Biosensors GmbH
Perchtinger Str. 8/10 81379 Munich Germany - Dynamic Biosensors, Inc.
300 Trade Center, Suite 1400 Woburn, MA 01801 USA - Order Information order@dynamic-biosensors.com
- Technical Support support@dynamic-biosensors.com
- Website: www.dynamic-biosensors.com.
Instruments and chips are engineered and manufactured in Germany. ©2024 Dynamic Biosensors GmbH | Dynamic Biosensors, Inc. All rights reserved.
Documents / Resources
 | dynamic BIOSENSORS heliXcyto Real Time Interaction Cytometry [pdf] User Manual CS-50-3, heliXcyto Real Time Interaction Cytometry, heliXcyto, Real Time Interaction Cytometry, Time Interaction Cytometry, Interaction Cytometry, Cytometry |