Categories: Dyna-Glo

Dyna-Glo DGH353CRP 3-Burner LG Gas Grill with Searplus Burner User Manual

DGH353CRP 3-Burner LG Gas Grill with Searplus Burner

3-BURNER LP GAS GRILL WITH SEARPLUSTM BURNER
Model #DGH353CRP/DGH353CRP-D

Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-447-4768, 8:00 a.m. ­ 4:30 p.m., CST, Monday ­ Friday or e-mail us at CustomerService@ghpgroupinc.com
052821

Assembler/Installer:

This manual contains important information necessary for the proper assembly and safe use of this appliance. Read and follow all warnings and instructions before
assembling and using this appliance. Leave these instructions with the consumer.

Retain these instructions for future reference.

Consumer/User: Follow all warnings and instructions when using this appliance.

DANGER

If you smell gas:

  1. Shut off gas to the appliance.
  2. Extinguish any open flame.
  3. Open lid.
  4. If odor continues, keep away from the appliance and immediately call your local fire department.

WARNING

  1. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
  2. An LP (liquid propane) cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
  3. This grill is for outdoor use only and shall not be used in a building, garage, under overhangs or any other enclosed area.
  4. Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at: 1-877-4474768, 8:00 a.m. ­ 4:30 p.m., CST, Monday ­ Friday.

DANGER

  • Do not use in an explosive atmosphere. Keep grill area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

WARNING: FUELS USED IN LIQUEFIED PROPANE GAS APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH FUELS, CAN EXPOSE YOU TO CHEMICALS INCLUDING BENZENE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. For more information go to: www.P65Warnings.ca.gov.
CAUTION

  • Never use charcoal or lighter fluid with the grill.
  • Do not use gasoline, kerosene or alcohol for lighting.
  • The LP gas cylinder used with this appliance must be:
    (a) Constructed and marked in accordance with the Specifications for LP-Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and
    (b) Provided with a listed overfilling prevention device.
    (c) Provided with a cylinder connection device compatible with the connector for outdoor cooking appliances. This grill is not intended to be used in or installed on recreational vehicles and/or boats.
  • Never keep a filled container in a hot car or car trunk. Heat will cause the gas pressure to increase, which may open the relief valve and allow gas to escape.
  • Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn you severely.

Safety Information
WARNING

  • Do not place the grill under overhead combustible construction or awnings. Minimum clearance from sides and back of unit to combustible construction, 36 inches (914.4mm) from sides and back.
    NOTE: The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

CAUTION

  • Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance.
  • An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.
  • This grill is for use with propane gas only (propane cylinder not included).
  • Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer, motor home or house.
  • Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked when not moving the grill.
  • Do not use the grill unless it is completely assembled and all parts are securely fastened and tightened.
  • Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all times.
  • Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc.).
  • Do not alter this grill in any manner.
  • Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or leaks, the hose must be replaced prior to operating the appliance. The replacement hose assembly will be that which is specified by the manufacturer.
  • Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
  • Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the grill before each use. Do not obstruct the flow of gas or ventilation air.
  • The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability to properly assemble or safely operate the grill.
  • Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.
  • Do not place this grill on any type of tabletop surface. The grill should be placed on a flat and level surface.
  • Do not use the grill in high winds.

Package Contents

PART

DESCRIPTION

QTY.

A

Lid Handle Assembly

1

B

Temperature Gauge

1

C

Temperature Gauge Bezel

1

D

Grill Body Assembly

1

E

Control Knob

2

F

Grease Cup Holder

1

G

Grease Cup

1

H

Warming Rack

1

I

Cooking Grate

2

J

Heat Tent For Main Burner

2

K

Side Table

2

L

Control Knob For Sear Burner

1

M

Heat Tent For Sear Burner

1

N

Tank Heat Shield

1

O

Left Leg Assembly

1

PART

DESCRIPTION

QTY.

P

Leg End Cap

2

Q

Side Exclusion Bar

1

R

Tank Brace

1

S

Cart Rear Support

1

T

Cart Front Panel – Upper

1

U

Cylinder Exclusion

1

V

Cart Front Panel – Lower

1

W

Axle

1

X

Wheel

2

Y

Right Leg Assembly

1

Z

Tank Retention Fixed Wire

2

A1

Smoker Box Rear Support

1

B1

Smoker Box Front Support

1

C1

Smoker Box Assembly

1

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list on previous page and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.

Estimated Assembly Time: 50 minutes with 2 people.

CAUTION
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and use and care instructions before attempting to assemble and use.

Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle 6

Operation Instructions
CHECKING FOR LEAKS

After all connections are made, check all connections and fittings on the LP gas tank valve, gas hose and regulator for leaks with a water and soap solution.

To prevent fire or explosion while testing for a leak:

  • Always perform leak test prior to lighting the grill.
  • Do not smoke while testing for a leak.
  • Always perform leak tests outdoors in a well-ventilated area.
  • Do not use any source of flame while testing for leaks.
  • Do not use the grill until any and all leaks are corrected.
  • If you are unable to correct a leak, disconnect the propane supply and call a gas appliance service dealer.

PERFORM LEAK TEST

  • Prepare leak test solution by 50/50 ratio of liquid dish soap and water. Total solution required is approximately 2 – 3 ounces (70 – 90 ml). Put leak test solution in a spray bottle.
  • Ensure all control knobs are in the O OFF position.
  • Connect the gas hose to the gas supply.
  • Open the LP gas tank valve.
  • Spray leak test solution on all gas carrying connections and fittings. Presence of bubbles at areas of applied test solution indicates a gas leak. If leaks are detected or you smell or hear gas, shut off the gas supply valve immediately and repair or replace the defective part. Do not use the grill until all leaks are corrected.

CAUTION
Only use the regulator and hose assembly provided! If a replacement is necessary, please call our customer service center. Do not use replacement parts that are not intended for this grill.

WARNING
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

Operation Instructions
CONNECTING GAS CYLINDER

The propane gas supply cylinder to be used must be constructed and marked in accordance with the Specifications for LP Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission, as applicable; and provided with a listed overfilling prevention device. Use only 20-pound cylinders (height: 18 inches, tank diameter: 12.2 inches, foot diameter: 8.03 inches) equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances. The cylinder must include a collar to protect the cylinder valve. The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the gas cylinder must be disconnected. Storage of an appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage or any other enclosed area. Your cylinder must never be stored where temperatures can reach over 125°F. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane. Before connection, be sure that there is no debris caught in the outlet of the gas cylinder, outlet of the regulator valve or in the outlet of the burner and burner ports. Connect regulator valve and hand-tighten firmly. Keep the propane cylinder valve closed and disconnect the propane cylinder from the regulator valve when the grill is not in use. DO NOT obstruct the flow of combustion air and ventilation air to the grill. The propane cylinder must be arranged for vapor withdrawal and equipped with a listed overfilling prevention device. Please use the proper cylinder orientation to provide vapor withdrawal. NOTE: The cylinder must be fully upright for the cylinder to have vapor withdrawal only.

CAUTION
a. Do not store a spare LP-gas cylinder under or near this appliance.
b. Never fill the cylinder beyond 80 percent full.
c. If the information in (a) and (b) is not followed exactly, a fire causing death or serious
injury may occur.

NOTE: Other cylinders may be acceptable for use with this appliance provided they are compatible with the appliance nesting hole and retention means. Refer to Step 16 of the Assembly Instructions for correct cylinder to cylinder holder connection.

WARNING
ALL INSTRUCTIONS AND SAFEGUARDS ON THIS PAGE MUST BE FOLLOWED TO PREVENT FIRE, DAMAGE AND/OR INJURY.

CONNECTING THE LP TANK

  1. The knob on the LP tank must be closed. Make sure that the knob is turned full stop. The cylinder supply system must be arranged for vapor withdrawal.
  2. Check that the control knob on the control unit is turned off.
  3. Remove the protective cap from the LP tank valve and coupling nut.
  4. Hold the regulator in one hand and insert the nipple into the valve outlet.
    Be sure the nipple is centered in the valve outlet. The coupling nut connects to the large outside threads on the valve outlet. Use care ­ do not cross thread the connection.
  5. Hand-tighten the coupling nut clockwise until it comes to a full stop.

Firmly tighten by hand only. Do not use tools.

To Disconnect: Fully close the tank valve by turning clockwise.

Turn the coupling nut counterclockwise until the regulator assembly detaches. clockwise to a

WARNING
In the connection process, make sure:

  • the regulator inlet connector mates with the cylinder valve outlet properly, safely and firmly, and;
  • the LP gas hose does not come in contact or remain in contact with the firebox.

Lighting The Grill Before first use:
Remove all hangings or plastic straps, if present. Before you cook on your new gas grill, it is important to clean your grill with heat. To do this, operate the grill for approximately 15 minutes with the lid closed and the control knobs in the highest position. This will clean the internal parts by burning off any residue and odor from the manufacturing process.
CAUTION
If the flame extinguishes accidentally during ignition or operation, immediately TURN OFF the cylinder valve and then TURN OFF the control knob.

WARNING
Do not lean over grill when lighting. Read instructions before lighting.

  1. Check that the control knobs are in the O OFF position.
  2. Open valve at tank fully by turning
  3. Open lid during lighting. counter-clockwise.
  4. Depress and turn control knob counterclockwise from O OFF position, past the ignite position, to the high position for the main burners and for the SearPLUSTM burner. You may need to repeat several times to ignite the burner.

If ignition does not occur in 5 seconds, turn the control knobs to O OFF position, wait 5 minutes, and repeat the lighting procedure.

If the burner still does not light, check that there is gas in the cylinder and follow the match lighting instructions on the following page.

Cooking: After lighting, adjust burner, including SearPLUSTM burner, from high ( ) to low ( ) position for desired cooking temperature.

Searing Food with the SearPLUSTM Burner:

To sear food, use the SearPLUSTM burner with the red control knob, which has a higher temperature range than the other burners. After lighting, adjust SearPLUSTM burner control knob to Sear Position ( ) and place food to be seared on the sear grate directly over the SearPLUSTM burner.

LIGHTING THE GRILL WITH A MATCH

  1. Open the lid.
  2. Insert a match in the end of the match holder that is installed on the inside of the cabinet door.
  3. Light the match.
  4. Immediately place the lit match through the spaces in the grill grates near the ports of the burner between the heat tents as shown. Make sure the lit match is close to the burner ports.
  5. Press in the control knob that operates the burner and rotate counter-clockwise to the high position for the main burners, and for the SearPLUSTM burner which should light immediately.
  6. Repeat steps 2~5 to light additional burners.
  7. Adjust burners to desired cooking settings.

CAUTION
Make sure all burner controls are off except for the burner being lit and the burners that have been lit.

WARNING
If ignition does not occur in 5 seconds, turn the burner control(s) OFF O . Wait 5 minutes,
and repeat the lighting procedure.

Match Lighting
SHUTDOWN INSTRUCTIONS

  1. Turn all control knobs clockwise to the O OFF position.
  2. Close valve at tank fully by turning clockwise.
  3. Close lid.

Turn off LP supply at cylinder when appliance is not in use.

Care and Maintenance
Cooking Grates

The best time to “burn-off” the cooking grates is after every use (approx. 15 minutes). The grill is already hot from cooking, thus requiring less fuel to reach the necessary temperature for “burn-off.”
To “burn off” or heat-clean your grill, turn the burners to highest position and run for 15 minutes with the lid closed. Then turn off the burners and use a wire brush to clean excess food residue from the grates.
The porcelain grates have an enamel finish (similar to glass) and should be handled with care to help prevent chipping.

CAUTION
Ensure the grill is cool and gas supply is turned off at the LP-Gas Cylinder before cleaning and conducting maintenance.

Recommended Cleaning Supplies Mild liquid dish soap, warm water, nylon cleaning pad, wire brush DO NOT use cleaners that contain acid, mineral spirits or any abrasive substance.

Outside Surfaces It is recommended to use only mild dish soap and hot water to clean grill and grill parts. Rinse with warm water.

Inside Bottom Pan of Grill Body To avoid flare-ups, clean the bottom pan of the cooking box regularly. To clean, remove residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and warm water. Rinse with warm water. Avoid water splashing into venturi tubes of burners.

Heat Tents Clean residue with wire brush and wash with mild dish soap and warm water. Rinse with warm water.

Grease Cup Empty the grease cup and clean with mild dish soap and warm water on a regular basis.

Checking The Flame For maximum fuel efficiency and cooking performance, flame
should be a blue-yellow color and be between 1- 2 inches high.
To check the flame, view the flame through the holes in both sides of the firebox.

Care and Maintenance

Burner Assembly Removing The Burner Assembly

  1. Make sure all control knobs are in the
    OFF position, gas supply valve is closed, and the gas hose is disconnected from the gas supply.
  2. Open lid and remove warming rack, cooking grates, heat tents, and smoker box assembly.
  3. Remove hinge pin as shown in Figure 1.
  4. Slide main burners and SearPLUSTM burner out of firebox.
  5. Detach ignition wire from electrode in Figure 2.

Care and Maintenance
WARNING

If these instructions are not followed, a fire or explosion may result, possibly causing serious bodily injury or death.

Cleaning the Burner Assembly
­Make sure the grill is cool.

  1. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
  2. Ensure burner is free of any damage. If damage is found, replace with new burner.
  3. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris.

Re-installing the Burner Ensure that gas valve orifices are correctly positioned inside burner inlet (venturi). The use of a flashlight may be necessary to ensure the correct position. View the correct position through the firebox vent holes as illustrated below. Reattach each burner with the hinge pin and reattach the ignition wire to electrode.
Other Care and Maintenance It is recommended that inspection and service on this appliance be conducted annually by a qualified service person. It is recommended that you always check that the outdoor cooking appliance area is clear and free from combustible material, gasoline and other flammable vapors and liquids before lighting. It is recommended that you regularly check that the flow of combustion and ventilation air is not obstructed. It is recommended that you regularly check that the ventilation openings of the grill cabinet are free and clear from debris. It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect nests. A clogged tube can lead to a fire beneath the grill.

Documents / Resources

Dyna-Glo DGH353CRP 3-Burner LG Gas Grill with Searplus Burner [pdf] User Manual
DGH353CRP, DGH353CRP-D, 3-Burner LG Gas Grill with Searplus Burner

Recent Posts

XINDAO XD Collection Antimicrobial Wireless Mouse User Manual

XD Collection Antimicrobial Wireless Mouse Antimicrobial wireless mouse Copyright© XD P300.89X Content English p. 3…

1 min ago

RAZER 382 Wireless Earphones User Guide

382 Wireless Earphones

3 mins ago

GLORIOUS GLO-ACC-MS-WDK-MB D Minus Wireless Dongle User Guide

GLO-ACC-MS-WDK-MB D Minus Wireless Dongle Quick Start Guide MODEL D MINUS WIRELESS Dongle: · GLO-ACC-MS-WDK-MB…

4 mins ago

WINEGARD AZ1000022 WG06-Basic Gateway 2X2 User Manual

AZ1000022 WG06-Basic Gateway 2X2 WINEGARD WG06-Basic Gateway 2X2 Specifications: WARNINGS: · Read this manual carefully…

4 mins ago

VAJESTIC MIC 800W UHF Headset Microphone User Manual

MIC 800W UHF Headset Microphone 100.00 mm MIC 800W UHF HEADSET MICROPHONE WITH RECHARGEABLE WIRELESS…

5 mins ago

MYMAHDI M230BT Digital MP3 Player User Manual

M230BT Digital MP3 Player FCC Statement This equipment has been tested and found to comply…

5 mins ago