DUMOR Stackable Frame Kit User Manual

DUMOR Stackable Frame Kit

a close up of a cage

Open the box and make sure you have all the parts in the list:

PARTS LIST

Part#

Description Image

Quantity

1

Verical Frame Legs

4 pcs

2

Horizontal Dropping Pan Supports

2 pcs

3

Stacking Lugs

4 pcs (only used if stacking for more cages)

4

Nuts & Bolts

12 NUTS and 12 BOLTS

 

  1. Remove top of already assembled cage
    a close up of a cage
  2. Lay the cage on its side and attach the vertical frame legs to the two horizontal plates on each side of the cage. There should be an extra hole at the bottom of the vertical frame leg that will be used to attach the horizontal dropping pan supports. Secure with two nuts and bolts per side. The head of the bolt will be on the outside of the cage.
    a screen shot of a cage
  3. Repeat step 2 for the remaining legs.
    a close up of a cage
  4. Gently, flip the cage upside down and attach the horizontal dropping pan supports on the inside of the vertical frame legs. Bolt the supports through the vertical frame legs from the same direction as the vertical frame legs.
    a close up of a cage
  5. Put the cage upright and place the top panel on the cage, then secure the top panel with the hooks on all 4 sides same as when attached side panels.. Slide the tray into the tray supporters underneath the cage.
    a close up of a cage
  6. You can stack 2 cages on top of each other using the four stacking lugs.

Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY
BRENTWOOD, TN 37027
For customer support,
call: 1-888-376-9601
www.TractorSupply.com
MADE IN VIETNAM

Documents / Resources

PDF thumbnailStackable Frame Kit
User Manual · Stackable Frame Kit, 1457222, 1463121

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Does this frame equip allow for stacking? I do not see any reference to allow the 30″ x 36″ cages to be stacked in the directions.

    Phyllis Schue asks Does this frame equip allow for stacking? I do not see any reference to allow the 30" x 36" cages to be stacked in the directions.
    Manuals+ clarified question
    Question

    Does the DUMOR Stackable Frame Kit allow for stacking 30" x 36" cages?

    Answer

    Yes, the DUMOR Stackable Frame Kit is specifically designed to allow for stacking. According to the assembly instructions, the kit includes 4 Stacking Lugs (Part #3) which are used specifically for this purpose.

    To stack the cages, follow these steps found on page 2 of the manual:

    • Ensure you have assembled the frame kits on both cages.
    • Use the four stacking lugs provided in the kit.
    • Place the second cage on top of the first cage, securing them with the lugs.

    The manual explicitly states in step 6: "You can stack 2 cages on top of each other using the four stacking lugs."

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.