Ducky YOTD Dragon Edition keyboard
Ducky Year Of The Dragon Edition
Note: The exact specifications may vary by region; for details, please inquire with the respective local agents.
Specification :
- Type: Mechanical keyboard
- Structure: Gasket Mount
- LED: RGB color LED
- Keycap material: PBT + PC
- Printing method: Dye-sublimation
- Origin of Production: Taiwan
- Size: 335 x 125 x 40 mm
- Weight: 1250g
Features
- Classical Soaring Dragon Pattern
- Oriental Crystal Keycaps
- Special Coiled Cable
- Special Chinese Tassel
- Extra Seal of the Dragon Esc & Spacebar
- Nanometer Color Rendering
- Hot-swappable Mechanical switch sockets
- True USB Type-C interface, compatible with all Type-C devices
- Basic QMK Structure and support VIA, personalize functions as you like
Keyboard configuration diagram, US layout used as example
Standard Layer
Note: Detailed functions may be modified through QMK / VIA.
Fn Layer
Key Functions
RGB LED Backlit Functions
Note：
Detailed functions may be modified through QMK / VIA.
QMK Function Setting
The QMK structure allows users to write their own firmware programs in order to incorporate more specialized functions.
- Detailed information can be found on the following QMK website. https://qmk.fm/
- This method requires firmware burn through the QMK toolbox for advanced users. For beginners, VIA software is recommended.
- If the relevant model is not on the QMK website, it could be under maintenance. Kindly notify us and we will update it ASAP.
VIA Function Setting
Operation method
- Step 1. Open https://usevia.app/
- Step 2. Click “Authorize device+” to connect the keyboard.
- Step 3. The keyboard configuration appears on the screen, and you can start to configure the keyboard.
Note：
Keyboard settings can be configured on the VIA website or through programming. For more details, you can find the setting information on the VIA website. https://www.caniusevia.com/
Ison File Operation method
- Step 1. Open the Settings page and enable the Show Design Tab function.
Note：
If you do not see the relevant model on the VIA page, you can download the corresponding json file from the Ducky official website to perform manual verification. https://www.duckychannel.com.tw/ - Step 2. Open the Design page and upload the json file of the corresponding model of the ProjectD keyboard.
Note：
If you do not see the relevant model on the VIA page, you can download the corresponding json file from the Ducky official website to perform manual verification. https://www.duckychannl.com.tw/ - Step 3. Open the Configure page and start setting the ProjectD keyboard function.
Note：
If you do not see the relevant model on the VIA page, you can download the corresponding json file from the Ducky official website to perform manual verification. https://www.duckychannel.com.tw/
Set-up Example
- Use key puller to pull out the key caps
- Use switch puller to pull out the switches
- Align switch pins with the holes
- Gently push the switch in
Disclaimers
- When swapping out switches, please make sure to secure the keyboard in place and then pull the switch out.
- Please ensure the correct pin direction and avoid applying excessive force to prevent damaging the PCB and switch during inserting switches.
- Products that have been exposed to liquid damage will not be under warranty coverage.
- Products that have been subjected to any modifications will not be under warranty coverage.
Warranty is 1 year from date of purchase via our Official Vendors https://www.duckychannel.com.tw/en/location/global Please contact the vendor you purchased from for RMA procedures.
Documents / Resources
 | Ducky YOTD Dragon Edition keyboard [pdf] User Manual YOTD Dragon Edition keyboard, YOTD, Dragon Edition keyboard, Edition keyboard, keyboard |