DUALTRON EY4 Smart Display Plus Support
Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.
The pictures shown are for illustration purposes only. Actual product may vary.
Diagram And Functions
Specifications
- Disclaimer: this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purposes only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, or up-to-date of such information. DUALTRON reserves the right but not the obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all law and/or regulations, requirements, prohibitions, restrictions and/or limitations imposed by either law, government authority, court, private party or others that may apply to your use of this product.
- Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
- Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
- Max.Speed: tested while riding with a full battery,75kg load,25°C, straight road on flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)
Packing List
Assembly
- Raise the steering tube and make sure the folding latch gets into the button correctly.
(Carefully,if the folding latch gets into the button incorrectly,the steering tube will fall down and be damaged) - Press down the quick release lever firmly to make sure the folding mechanism is tightened.
- Check the status of the safety button and make sure it is back to position.
- Lift the handles, slide the hoops, and fix the handles firmly by quick releases.
Bluetooth Connection
APP Download Guide
How to Ride
- Power on the scooter and choose the speed mode. * Please choose the speed mode before riding! Note:Speed mode can be choose via the Dualtron app.
- Stand on the footboard with one foot and push off with the other foot to start gliding. *Make sure you have disabled SAFE mode.(SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing brake lever.)
- Put both feet on the footboard and stand stably. Pull the throttle to speed up.
- Slow down by releasing the throttle and squeezing the brake levers.
- To turn, shift your body and turn the handlebars slightly.
Please watch out for road conditions, sufficient turning space is required. - When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards.
Folding
- Fold the handlebars,slide the folding handle lock out of position to release handles.
- Slide the safety button up and open the quick release lever.
- Press the both folding latches, and then fold the steering tube.
When pressing the safety latch, you must hlod the steering tube with your hand to prevent falling down and hitting.) - Lock the handlebar hook to the footrest.
Ensure that lock the handlebar when lift scooter)
Frequently Asked Questions
- Q: Can I replace the battery on my own?
A: It is recommended to have the battery replaced by a professional service provider to ensure safety and proper installation. - Q: How often should I check the tire pressure?
A: It is advisable to check the tire pressure before each ride to maintain optimal performance and safety.
Documents / Resources
 | DUALTRON EY4 Smart Display Plus Support [pdf] Instruction Manual EY4, BLDC Hub Motor, EY4 Smart Display Plus Support, EY4, Smart Display Plus Support, Display Plus Support, Plus Support |