dotMod dotPod Plus Vape User Manual

dotMod dotPod Plus Vape

Safety Warnings

WARNING:
Sale to or use of this product by minors ls strictly prohibited.

RECOMMENDED USE

This product is intended to be used as a refillable electron le cigarette with compatible E-liquld, which may contain nicotine. Nicotine is an addictive substance and Is not recommended to use ln the following scenarios:

This device is not suitable for:

• Persons under the legal smoking age
• Non-smokers
• Pregnant or lactating women
• If you suffer from any of the following conditions, speak with a healthcare provider or pharmacist before using this product: heart, throat, or lung disease; kidney or liver disease; stomach ulcer or inflammation of the stomach or esophagus; an overactive thyroid gland or Pheochromocytoma; diabetes.
• You may experience possible adverse effects if you use nicotine containing E-liquid with this product. If any of the following symptoms become severe or last more than 48 hours, please consult a healthcare professional: Feeling faint, Nausea, Dizziness, Headache, Coughing, Irritation of the mouth or throat, stomach discomfort, hiccups, nasal congestion, vomiting, chest palpitations, pain, or an irregular heart rate.
• If you experience any side effects as a result of using this product, please help us by informing us about it so that we can continue to improve the safety of our products.
  Visit: https://dotmod.com/pages/health-safety to fill out our Safety concerns form. Alternately,  you can also report your symptoms directly b MHRAusing the Yellow Card Portal available at: https://yellowcard.mhra.gov.uk/

WARNING:
Lithium-ion batteries are volatile and may or burn if charged, used, transported, stored, or disposed of improperly.

• Keep battery away from high heat, direct sunlight, extreme cold temperatures, humidity, water, a nd metal.
• Do not leave this device unattended while charging, while charging overnight, or unattended in your vehicle.
• Do not tamper with battery or disassemble the device.
• Inspect battery for wear or damage before each use if applicable. Do not use if worn or damaged.
• If the device gets too hot, stop use or charging the device and allow it to cool down.
• The recommended ambient temperature for use is -10°C to 40°C
• The temperature of the main body of the machine should be kept with the range of OOC to 400C when charging.
• If you witness the battery starting to balloon, swell, smoke, or become very hot: immediately discontinue use, turn off the deuce, place it on a non-flammable surface in a well ventilated area away from people and pets then contact our customer service team.
• Always have a fire extinguisher handy in the event of a fire.
• Do not throw batteries into a fire. Please recycle or dispose of according to local law and regulation.
• Keep batteries away from children and pets. Should a child/pet swallow or chew on a battery, immediately consult a physician and/or call your local poison control center.
• Charge the device by a UL Listed USB wall charger.

Know your dotPod Plus

Filling the pod

1. Remove the magnetic pod by firmly pulling it out of the (Proceed to step 2 if the pod is left in the device)
2. Find the fill hole located under the silicone cover.
3. Open the silicone fill hole cover, and fill the pod. Do not overfill.

AUTO Mode

Product Parameters

Protection Features

1. Load Short-Circuit Protection: Activates when resistance is less than 0.15Ω.
2. Load Open Circuit Protection: Activates when resistance is greater than 3.0Ω.
3. Load Resistance Protection: Activates when resistance is less than 0.1Ω or greater than 3.0Ω.
4. PCB Board Over-Temperature Protection: Activates when temperature exceeds 75°C.
5. Battery Protection: Includes overcharge, over-discharge, overcurrent, and short circuit protection.

Prompt Information

Customer Support

Our Customer Service Department is happy to help! We encourage you to contact us with any questions or concerns regarding your dotPod Plus.

Customer Service Department hours: Monday – Friday, 9:00 AM PST – 5:00 PM PST

Website: www.dotmod.com

FAQ

• How do I know when to charge my dotPod Plus?
  • The device will display “LOW BATTERY” when it needs charging.
• What should I do if my device shows “NO LIQUID”?
  • Refill the pod with e-liquid.
• How can I reset my device to factory settings?
  • Use the “RESTORE” option in the device menu.