DOOR-safe-LOGO

DOOR safe DS6914 WiFi Digital Door Viewer

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-PRODUCT

Specifications

  • Screen Dimensions: 146 x 97 x 20mm
  • Outdoor Unit Dimensions: 62 x 62 x 14mm
  • Camera Viewing Angle: 120 degrees
  • Camera Resolution: 1 MP
  • SD Card Support: Up to 64GB

FAQ

Q: What is the maximum SD card capacity supported by the camera?

A: The camera supports SD cards with a capacity of up to 64GB.

Q: How can I activate night vision mode?

A: The device automatically switches to night vision mode when it detects low light conditions.

Q: Can I change the device’s name in the app?

A: Yes, you can change the device’s name in the app settings after pairing it with your Wi-Fi network.

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-1

PRODUCT DESCRIPTION

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-2

  1. 4.3 inch color screen
  2. On/off switch
  3. USB-C charging port
  4. SD card
  5. Reset
  6. See through camera & activate screen
  7. WiFi configuration
  8. Infrared LED for night vision
  9. PIR motion sensor
  10. Light sensor
  11. Camera
  12. Outdoor unit with camera
  13. Doorbell push button
  14. Speaker
    • Dimensions screen: 146 x 97 x 20mm.
    • Dimensions outdoor unit: 62 x 62 x 14 mm.
    • The camera’s viewing angle is 120 degrees.
    • The camera has a resolution of 1 MP
    • An SD card of up to 64Gb can be inserted into the screen.

ASSEMBLY & COMMISSIONING

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-3

  1. Insert the outdoor unit with the camera in it, with the plug that must be connected to the screen, through a hole in a door. The diameter of this hole in the door must be at least 14 mm and at most 28 mm.
  2. The outdoor unit must be attached to a mounting plate with 1 screw. Make sure that the arrow on the mounting plate points upwards and that the push button on the outdoor unit is at the bottom.
    Four screws with different lengths of 30, 50, 70 and 90 mm are supplied. Choose the correct screw based on the thickness of the door. The door must be at least 35 mm and at most 120 mm thick.
  3. Insert the plug into the back of the screen.
  4. Slide the screen from top to bottom onto the mounting plate.
    DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-4
    1. On/Off Switch: On the right side of the screen, next to the USB-C port for the charger, there is also an on/off switch to turn off the screen completely.
    2. Charging: The built-in, non-removable 3500mAh rechargeable battery can be charged with the supplied USB-C cable and a 5V char-ger from a smartphone. To charge the battery in the screen, the screen can be easily removed from the door by sliding the screen up and disconnecting the plug from the camera.
    3. Answer / look through camera: Press the middle button with the figure on the screen to answer a call or to be able to look through the camera, without having to ring the doorbell first.
    4. Ring the doorbell: There is a push button on the outdoor unit that allows visitors to ring the doorbell.

APP DOWNLOAD & ADD TO APP

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-5

  • Connect your smartphone to your own 2.4Ghz Wi-Fi network
  • Select in the app:
    ‘Add Device’ or ‘+’ and ‘Add Device’
  • Select ‘Camera & Lock’ & “Smart Doorbell’
  • Turn on ‘QR Code for Camera’ at the top right
  • Turn on the door viewer
  • Press the reset button for 8 seconds, this is the leftmost button on the screen. You will hear: System Reset. And then: camera is ready to begin pairing.
  • Press ‘Next’ 4 times
  • Enter your own Wi-Fi password
  • Let the camera scan the QR code by pointing the camera at the QR code
  • Wait until the camera says:
    ‘Accept success, please wait’
  • Press in the app: Blue button ‘Hear tone’
  • Change the name if necessary & press ‘Continue’

PRODUCT OPERATION

  • The screen has no menu of its own. All settings and reviewing recordings must be done via the app.
  • The following can be set in the app:
    • Screenshot: take a photo of the camera image
    • Record: make a video of the camera image
    • Speak: talk through the speaker in the camera unit on the outside of the door
    • Photo album: view the photos taken
    • Playback: view the recorded videos
    • HD/SD: switch between HD and SD image quality
    • Working mode: choose the battery saving mode
    • PIR switch: turn the motion detector off, or on to a low, medium or high sensitivity
    • Turn the time and date display on the top left of the screen off or on
    • Audio mode: set the audio mode to one-way or two-way audio
    • Anti-flicker: turn the anti-flicker function off or on 50 or 60 Hz
  • It is not possible to set different ringtones and the volume of the ringtone from the screen.
  • It is not possible to talk back and forth with the caller via the screen, this is only possible via the app.
  • It is possible to add an extra DS6603 WiFi gong to this door viewer by setting a smart scenario in the app so that an extra gong can be heard else-where in the house (where there is WiFi). See the explanation video on the Doorsafe website for this.

TUTORIALS:
WWW.YOUTUBE.COM/DOORSAFE

DOOR-safe-DS6914-WiFi-Digital-Door-Viewer-FIG-6

WWW.DOORSAFE.EU

Doorsafe Postbus 633645 ZK Vinkeveen The Netherlands
www.doorsafe.eu
Made in China

Documents / Resources

DOOR safe DS6914 WiFi Digital Door Viewer [pdf] Instruction Manual
DS6914 WiFi Digital Door Viewer, DS6914, WiFi Digital Door Viewer, Digital Door Viewer, Door Viewer
DOOR safe DS6914 WiFi Digital Door Viewer [pdf] User Guide
DS6914, DS6914 WiFi Digital Door Viewer, DS6914, WiFi Digital Door Viewer, Digital Door Viewer, Door Viewer, Viewer

References

Leave a comment

Your email address will not be published. Required fields are marked *