DOOGEE TABA9 Tablet User Manual

DOOGEE TABA9 Tablet

OVERVIEW

1. Speaker
2. Power Button
3. Volume Button
4. Restart Button
5. Front Camera
6. Microphone
7. SIM/TF Card Slot
8. Type-C Port
9. Speaker
10. 3.5mm Headphone Jack
11. Flash
12. Camera

Product Usage Instructions

Inserting TF Card:

1. Take out the card slot and ensure the bevel of the TF card aligns with the bevel of the card slot.
2. Insert the TF card into the corresponding card slot.
3. Insert the card tray into the tablet following the direction of the arrow.

Safety Instructions:

• Keep the pad at least 15 cm away from any medical implant or rhythm adjuster.
• Avoid exposing the device and batteries to high temperatures or heat-generating equipment.
• Do not use unapproved power sources or disassemble the battery.
• Avoid dropping, crushing, scratching, or puncturing the battery.
• Follow proper maintenance guidelines to ensure safe and effective use.

Maintenance:

• Do not fall, knock, or shake the pad.
• Clean the pad case with a soft cloth dampened with water or mild soap.
• Clean the lens with a clean, dry, soft cloth.
• If encountering abnormal images, follow the restart methods provided in the manual.

How to insert the card

• To ensure that your TF card can be inserted into your tablet computer correctly, please place the TF card according to the schematic diagram below.
• Take out the card slot, make sure the bevel of the TF card is aligned with the bevel of the card slot, and put it into the corresponding card slot.
• Insert the card tray into the tablet in the direction of the arrow.

How to boot

Non-removable battery
Press the power button for 3-5 seconds to boot

How to send SMS, MMS

SMS

• Open the SMS app
• Select New Information
• Enter a phone number or browse your contacts
• Select Edit Information and enter your text
• Send

MMS – video

• When writing a text message
• Select images, videos, or other files you want to add, even You can take a new picture or video right away.
• Selecting or sending

Language switching settings

• Main menu-settings-system setting– language and input method
• Language and input method-language-language adding
• Select the language you need, and the system will automatically jump back to the language interface
• Select the icon after the language bar and drag it to the first one.

SAR

• SAR 10g limit: 2.0 W/Kg,
• SAR Value:Body:0.988W/Kg,Limb:0.997W/Kg.
• In line with the requirements of the national standard GB 21288-2007.

To ensure safe use of the product, you must strictly abide by the following rules.

• The pad should be at least 15 cm away from any medical implant or rhythm adjuster, and never put the device in your coat pocket.
• Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion.
• When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet.
• If the device is equipped with a non-removable battery, the battery or device.
• Use of an unapproved or incompatible power source, hazards.
• Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage.
• Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery.
• The company does not bear the responsibility for accidents caused by non-standard related charging equipment.

Maintenance

• Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
• Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other methods.
• Please avoid falling, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
• Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water or a mild soap.
• Clean the lens with a clean, dry, soft cloth.
• (Example: camera lens) and display.

If you encounter an abnormal image, such as a crash during use, the processing method is as follows:

• For a pad that cannot remove the battery, please press and hold the power button for more than 12 seconds; the pad will be forced to restart (unlock the pad when restarting)
• It can solve the general bug; for the pad that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug.
• When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.

E-Label

Settings – About Phone – Legal Information – Authentication Information

This product can be used in all EU member states.

Scan the QR code for more function information

www.doogee.com

This user manual is for reference only.

The specific functions and product pictures may be slightly different from the actual ones. Please prevail in kind.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use on the body, as described in this user guide, is 0.703W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements).

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID: 2AX4YTABA9. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow-com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

FAQs

• Q: What should I do if my tablet crashes during use?
  A: For tablets with non-removable batteries, press and hold the power button for more than 12 seconds to force e restart. For tablets with removable batteries, remove and reinsert the battery restart.
• Q: How should I clean my tablet?
  A: Use a soft cloth dampened with water or mild soap to clean the pad case. Clean the lens with a dry, soft cloth.