XV-24 DMP XV Gateway with Alarm Vision
Specifications
- Product: XV Gateway
- Networking: LAN, Cellular Network
- Security Features: Network isolation, Dual network interface cards (NIC)
XV GATEWAY OVERVIEW
The XV Gateway with AlarmVision® seamlessly integrates cameras, analytics, and the XR Series or XT75 Control Panel to create smart motion detectors that trigger panel responses in real time based on real events for real results. Virtual Keypad users can view live and recorded HD video clips, define video actions, and receive push notifications of real events in real-time for real results. You need an active Dealer Admin account at dealer.securecomwireless.com to activate the XV Gateway.
COMMUNICATING WITH THE PANEL
The XV Gateway uses the IP of the control panel to send messages over the LAN to the control panel. From there, the control panel passes those messages to the monitoring center receiver using network or cellular communication. The primary network connection on the XV Gateway and the panel should be connected to the same network switch or any network switch that is connected to the same subnet that the panel is connected to.
XV Gateway Security
The XV Gateway offers installers the ability to isolate networks for increased network security, without compromising the ability to send messages out to the monitoring center. The XV-60 and XV-96 also offer the ability to use Dual network interface cards (NIC), allowing the XV Gateway to have cameras on a secure LAN, and secondarily maintaining communication to the panel and SecureCom servers.
Configure Secondary NIC for Private Camera Network
There are two connection options to choose from when adding a secondary network interface to a private camera network.
- DHCP Server: This option will automatically assign a dynamic IP address to the XV Gateway so it can change over time. If you can plug in a camera or device into your private network and immediately access other devices on the network, then you likely have a DHCP server.
- Static IP Address: This refers to an IP address that is manually assigned to the XV Gateway and does not change automatically. If your private camera network consists of only cameras and you set up each camera with its ownstatic IP address, then you likely do not have a DHCP server.
Additional Resources
For additional information about DMP control panel communication options, refer to the DMP Control Panel Network Guide (LT-2947). For additional information about the XV Gateway, visit the XV Gateway with Alarmvision® Help File at xvgateway.dmp.support
FAQ
- Q: Can the XV Gateway connect to the Camect Cloud?
- A: No, the XV Gateway can connect to the Camect Cloud, but the panel does not have this capability.
“`
Documents / Resources
 | DMP XV-24 DMP XV Gateway with Alarm Vision [pdf] Instructions XV-60, XV-96, XV-24 DMP XV Gateway with Alarm Vision, XV-24, DMP XV Gateway with Alarm Vision, Gateway with Alarm Vision, Alarm Vision |