dJI v01.07.0000 Compatibility Issue Fix

Specifications

• Firmware Version: v01.07.0000
• DJI Fly App Version: v1.15.8 (iOS & Android)

Product Usage Instructions:

Updating Firmware:
To update the firmware of your DJI Goggles Integra, follow these steps:

1. Connect the goggles to a mobile device running the DJI Fly app.
2. Select ProfileDevice Management in the app.
3. Locate the corresponding goggles and select Firmware Update.
4. Follow the on-screen instructions to complete the firmware update.

Alternatively, you can use the DJI Assistant 2 software on a computer to update the firmware.

DJI Goggles Integra Release Notes

What’s New

• Added support to use with DJI O4 Air Unit / DJI O4 Air Unit Pro.
• Fixed some minor bugs.

Notes:

• Restart the aircraft (or air unit), remote controller, and goggles after the update is complete.
• Note that the update may reset various flight parameters such as the RTH altitude and the maximum flight distance. Before updating, take note of your preferred settings and readjust them after the update.
• If the date fails, restart the aircraft (or air unit), remote controller, goggles, and DJI Fly or DJI Assistant 2 (Consumer Drones Series) and try again.
• Update the firmware of the aircraft, goggles, and motion controller before using them for the first time, otherwise, the devices cannot be linked.
• Aircraft:
  • Update the firmware using the original remote controller of the aircraft.
  • Goggles and motion controller: Connect the goggles to a mobile device and run the DJI Fly app. Select ProfileDevice Management. Locate the corresponding goggles. Select Firmware Update and follow the on-screen instructions to update the firmware.
  • Alternatively, the DJI Assistant 2 (Consumer Drone Series) software can be used on a computer to update the firmware of the devices separately.
• When used with the goggles, only DJI RC Motion 2 is supported for flight control, other remote controllers cannot be used to control the aircraft.
• Restart the aircraft, goggles, and motion controller after the firmware update is complete.
• Note that the update may reset various flight parameters such as the RTH altitude and the maximum flight distance. Before updating, take note of your preferred settings and readjust them after the update.
• If the update fails, restart the devices and software, and then try again.
• https://www.dji.com/goggles-integra
• Copyright © 2025 DJI All Rights Reserved.

FAQS

How do I update the firmware of my DJI Goggles Integra?
To update the firmware, connect the goggles to a mobile device with the DJI Fly app installed. Follow the on-screen instructions to complete the update. Alternatively, use the DJI Assistant 2 software on a computer.

Documents / Resources

dJI v01.07.0000 Compatibility Issue Fix [pdf] User Guide v01.07.0000 Compatibility Issue Fix, v01.07.0000, Compatibility Issue Fix, Issue Fix, Fix

References

• User Manual