Categories: DJi

P102006 DJI RSC 2 GImbal stabilizer User Manual

P102006 DJI RSC 2 GImbal stabilizer

Product overview

  1. Tilt Motor
  2. Tilt Lock
  3. Screen
  4. Side Wheel
  5. Camera Control Button
  6. Joystick
  7. Button
  8. Extended Grip/Tripod
  9. Back Button
  10. M4/NATO
  11. Lock Knob
  12. Lower Quick-Release Plate
  13. Upper Quick-Release Plate
  14. Image Transmission/Focus Motor Port (USB-C)
  15. Focus Motor Port (USB-C)
  16. RSS Camera Control Port (USB-C)
  17. Front Dial
  18. Trigger
  19. Power Button
  20. Power Port (USB-C)
  21. Pan Lock
  22. Pan Motor
  23. Roll Lock
  24. Roll Motor

Getting Started

  1. Downloading the DJI RONINTM App and Watching the Tutorials
  2. Charging the Battery and Checking the Battery Level Before using for the first time, charge the DJI RSC 2 through the power port using a charging cable (included) and a USB adapter (not included). It is recommended to use a USB adapter with QC 2.0 and PD protocol (max. 24 W). Check the battery level through the screen.
  3. Attaching the Extended Grip/Tripod
  4. Unfold and unlock the gimbal
  5. Powering On/Off and Entering/Exiting Sleep Mode
    Press and hold the power button to turn DJI RSC 2 on or off. Tap or press twice to enter or exit sleep mode.
  6. Activating DJI RSC 2

DJI RSC 2 needs to be activated through the Ronin app before using for the first time.

  1. Press and hold the power button to power on the gimbal.
  2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required to launch the Ronin app. Once detected in the list of Bluetooth devices, select DJI RSC 2 and input the default Bluetooth password: 12345678. Make sure you are connected to the internet and follow the on-screen instructions to activate DJI RSC 2.

Mounting the Camera

Make sure to prepare the camera before mounting it to DJI RSC 2. Remove the lens cap and check that the battery and memory card are inserted in the camera. Make sure DJI RSC 2 is powered off or in sleep mode before mounting the camera.

  1. Attach the Upper Quick-Release Plate
    The camera lens and the arrow on the bottom of the upper quick-release plate must face the same direction. Attach the upper quick-release plate to the camera by tightening the screw.
  2. Attach the Lower Quick-Release Plate and Lens-Fastening Strap
  3. Attach the Camera to the GimbalTo remove the lower quick-release plate, toggle the lever on the camera mounting plate to the unlocked position and remove the lower quick-release plate while pressing the safety lock on the mounting plate.
  4. Connect the Camera Control Cable.
    Choose the proper camera control cable according to the camera type. Plug one end of the cable into the RSS camera control port of the gimbal and plug the other end into the camera.

Balancing

Balancing is required before shooting. Before balancing, make sure to power on the camera if using an optical zoom lens and to select the focal length if using a varifocal lens. Make sure DJI RSC 2 is powered off or in sleep mode before balancing.

  1. Balancing the Vertical Tilt
    • Unlock the tilt axis and loosen the mounting plate knob.
    • Rotate the tilt axis so that the camera lens is pointing upward. Check to make sure the camera is not top or bottom-heavy. If top-heavy, move the camera backward. If bottom-heavy, move the camera forward.
    • Tighten the mounting plate knob while holding the camera upward. The vertical tilt is balanced when the camera is steady while pointing upward.
  2. Balancing Depth for the Tilt Axis
    • Rotate the tilt axis so that the camera lens is pointing forward. Toggle the lever to the unlocked position.
    • Check to make sure the camera is not front or back-heavy. If front-heavy, move the camera backward by turning the knob. If back-heavy, move the camera forward.
    • Toggle the lever to the locked position. The tilt axis is balanced when the camera is steady while tilted up or down by 45°.
    • Lock the tilt axis.
  3. Balancing the Roll Axis
    1. Unlock the roll axis. Loosen the knob on the roll arm.
    2. Check the direction in which the roll motor swings. If the camera rotates to the left, move the camera to the right. If the camera rotates to the right, move the camera to the left.
    3. Tighten the knob. The roll axis is balanced when the camera is steady.
    4. Lock the roll axis.
  4. Balancing the Pan Axis
    1. Unlock the pan axis. Loosen the knob.
    2. While holding the grip, tilt DJI RSC 2 forward, and rotate the pan arm until parallel with you.
    3. Check the movement of the pan axis. If the camera lens rotates to the left, push the pan axis to the right. If the camera lens rotates to the right, push the pan axis to the left.
    4. Tighten the knob. The pan axis is balanced when the camera is steady when rotating the pan while tilting the grip.

Operation

After balancing, make sure the three axes are unlocked before powering on DJI RSC 2.

Screen Operation
Turn the side wheel to scroll the menu and press to confirm option. Press the back button to go back to the previous menu.
Button Functions

Power Button
Press and hold to power on or off.
Tap or press twice to enter or exit sleep mode.

Trigger
Tap once to start ActiveTrack (requires the Image Transmission System to be enabled).
Press and hold to enter Lock mode.
Tap twice to re-center the gimbal.
Tap three times to turn the gimbal 180° so that the camera faces you (selfie mode).

Camera Control Button*
Press halfway for autofocus.
Press once to start or stop recording.
Press and hold to take a photo.

M Button
Tap to select a user profile.
Press and hold to enter Sport mode.
Press and hold and press the trigger twice to remain in Sport mode. Repeat to exit Sport mode. Quickly tap twice to enter portrait mode.
Press three times to enter or exit 3D Roll 360. When in 3D Roll 360, move the joystick left or right twice to automatically rotate the camera. Tap the trigger twice to stop continuous auto rotation. Press and hold the M button together with the trigger to begin to auto-tune.

Front Dial*
Turn to control focus (default setting).

Joystick
Push up or down to control the movement of the tilt axis (default setting). Push left or right to control the movement of the pan axis (default setting).
*The functions of the camera control button and front dial vary according to the camera and require the camera control cable to be connected. Refer to the DJI RSC 2 Camera Compatibility List on www.dji.com/rsc-2

for more information.

Ronin App
Use the Ronin app to access more functions such as Force Mobile, virtual joystick, and gimbal and camera settings.

Specification

Weight Gimbal: Approx. 1196 g(excl. quick-release plate and NATO adapter)

Extended Grip/Tripod(metal):Approx.226 g

Extended Grip/Tripod(plastic):Approx.226 g Quick-Release Plate:Approx.102 g

Model P10
Dimensions Gimbal (folded): 260 × 210 × 75 mm

Gimbal (unfolded):400 ×185 ×175 mm (incl. grip, excl. Extended Grip/Tripod

Input Power Model:RB2-3400mAh-7.2V Type:18650 2S Capacity:3400 mAh

Energy:24.48 Wh

USB Input 5V/2A, 9V/2A, 12V/2A, 15V/1.6A
Bluetooth Operating Frequency 2.40 GHz -2.4835 GHz
Operating Temperature -20° to 45° C (-4° to 113° F)
Max Standby Time 14 hours
Charging Time 2 hours(when using a 18 W charger)

FCC Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • INcrease the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

Documents / Resources

Dji P102006 DJI RSC 2 GImbal stabilizer [pdf] User Manual
P102006 DJI RSC 2 GImbal stabilizer, DJI RSC 2 GImbal stabilizer, GImbal stabilizer

References

Share

Recent Posts

IKEA 365+ 5-Piece Cookware Set Instruction Manual

365+ 5-Piece Cookware Set IKEA 365+ English Before using for the first time · Wash,…

3 seconds ago

kmart 43193783 Beach Cabana Deluxe Stripe Instruction Manual

43193783 Beach Cabana Deluxe Stripe KMART - SUMMER 23 - PACKAGING REVIEW. MATERIAL LABEL STITCHED…

5 seconds ago

vounot 6563095838743 Retractable Manual Awning 200cm beige User Manual

6563095838743 Retractable Manual Awning 200cm beige Retractable Manual Awning 2.0M Store banne retractable 2.0M Einziehbare…

52 seconds ago

tala DWS-ECHO-CDL-01-US Echo Chandelier Installation Guide

DWS-ECHO-CDL-01-US Echo Chandelier US Installation Guide DAVID WEEKS FOR TALA Thoughtful lighting, responsibly designed in…

1 min ago

acaia AOT001 Orbit User Manual

AOT001 Orbit Acaia Orbit User Manual AOT001 FW 1.0.000 Contents 3 Introduction 4 Safety Information…

1 min ago

SoundPEATS Capsule3 Pro Wireless Earbuds User Guide

Capsule3 Pro Wireless Earbuds English English English English English English Capsule3 Pro 018-220385 IC ID:…

4 mins ago