DJI GOGGLES N3 60Hz LCD Screen and An Impressive

• Install DJI Fly App (Necessary)
• Watch Video Tutorials

Read the User Manual https://s.dji.com/guide80Power on/off: Press, then press and hold.

• Connect the goggles to the mobile device using a suitable data cable.
• Run DJI Fly on the mobile device and follow the prompts to activate the DJI devices. Follow the prompts in the goggles if unable to connect to the mobile device.
• After activation, tap Connection Guide on DjI Fly and follow the on-screen instructions to connect the aircraft.
• You can wear both your classes and the animals together.

EP https://www.dji.com/goggles-n3/downloads

This content is subject to change without prior notice. DjI is a trademark of DjI.
Copyright © 2024 DJI All Rights Reserved.

1. 5D button
2. Back Button
3. USB-C Port
4. microSD Card Slot

Installation

1. Scan the QR code for the DJI Fly app (required), video tutorials, and user manual.
   
2. Power On/Off: Press once, then press again and hold.
   
3. Connect the headset to your mobile device using a cable suitable for data.
4. Run DjI Fly on your mobile device and follow the prompts to activate the DJL devices.
5. If not yes manage to connect your mobile device, and follow the instructions on the viewer.
   
6. After activation, tap Connection Guide connection) on Djl Fly and follow the on-screen instructions on the screen to connect the aircraft.
   
7. You can wear your eyeglasses and eyeglasses together viewer.

Documents / Resources

dji GOGGLES N3 60Hz LCD Screen and An Impressive [pdf] User Guide GOGGLES N3 60Hz LCD Screen and An Impressive, GOGGLES N3, 60Hz LCD Screen and An Impressive, Screen and An Impressive, Impressive

References

• User Manual