MODify Double Sided Kit 02
MODify Double Sided K
MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Double Sided Kit 02 is a versatile retail display that includes four slatwall panels, two on front, two on back, and four SEG push-fit graphic panels, two on front and two on back. Customize and MODify this kit by adding accessories such as shelves, hooks, waterfalls, monitor mounts, bars and more.
02 MODify Double Sided Kit
We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications 6/1/2023
features and benefits:
Base Kit includes:
– Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
– Heavy-duty aluminum frame, steel base
– Steel, slotted uprights
– Four 36”W x 48”H slatwall panels, two on the front & two on the back
– Four 35”W x 47”H SEG, push-fit graphic panels, two on the front & two on the back
– Non-rolling Base
– Display is easy to assemble and install
– Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
– Monitor Mount (32″ TV Shown)
– U bars – Slatwall hooks
– Shelves
– Towel bars
– Faceout bars
– Waterfalls
dimensions:
| Hardware | Shipping |
| Assembled unit: 74”W x 96”H x 37.5”D 1879.6mm(w) x 2438.4mm(h) x 952.5mm(d) Approximate Weight: 202 lbs / 91.6257 kg |
Packing case(s): 1 Box Shipping dimensions: (96″L x 14″H x 24″D) 2438.4mm(l) x 355.6mm(h) x 609.6mm(d) Approximate shipping weight: 265 lbs / 120.202 kg |
| Graphics | additional information: |
| Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes. Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here |
Powder coat color options:
|
MODify Accessories
All Accessories available in white, black, or silver
Tools Required
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
KIT Hardware BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
 |
004-883 | 4 | 883MM (34.76in) OF SWC EXTRUSION |
 |
004-1058 | 4 | 1058MM (41.65in) OF SWC EXTRUSION |
 |
005-879 | 14 | 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION |
 |
824-947 | 1 | 947MM (37.28IN) LEFT SUPPORT LEG |
|
824-947 | 1 | 947MM (37.28IN) MIDDLE SUPPORT LEG |
|
824-947 | 1 | 947MM (37.28IN) RIGHT SUPPORT LEG |
 |
832-2350 | 1 | 2350MM (92.52in) MIDDLE UPRIGHT |
 |
832-EC | 1 | 7MM SEG PLASTIC END CAP FOR 832 EXTRUSION |
|
833-2350 | 1 | 2350MM (92.52in) LEFT UPRIGHT |
|
833-2350 | 1 | 2350MM (92.52in) RIGHT UPRIGHT |
|
833-EC | 2 | 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION |
 |
835-883-01-01 | 6 | 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS |
 |
MFY-BOLT-375-16-2.5 | 3 | 3/8-16 x 2.5″L bolt |
 |
MFY-DB-36-17 | 4 | 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN |
KIT Graphics BOM
| ITEM | COMPONENTS | QTY | DESCRIPTION |
 |
MFY-DS-02-A-G | 1 | (39.26 w X 51.08 h total size ) 35.26 w X 47.08 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
|
MFY-DS-02-B-G | 1 | (39.26 w X 51.08 h total size ) 35.26 w X 47.08 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
|
MFY-DS-02-C-G | 1 | (39.26 w X 51.08 h total size ) 35.26 w X 47.08 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
|
MFY-DS-02-D-G | 1 | (39.26 w X 51.08 h total size ) 35.26 w X 47.08 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS) |
Documents / Resources
 |
displaypros 02 MODify Double Sided Kit [pdf] Instruction Manual MFY-DS-K-02, 02, 02 MODify Double Sided Kit, MODify Double Sided Kit, Double Sided Kit, Sided Kit |