DIGITECH Mini LED Disco Ball User Manual
diagram

Mini LED Disco Ball User Manual SL-3513

  #
    Feature:
  Description:
    1  LED Cover  Protects the LEDs
   2  LEDs  3 x 1 W RGB LEDs rotate 360° automatically or by       sound activation
   3  DC Power Socket  Connect to a 12VDC mains power supply (not included)    with 2.5mm  DC plug
   4  Adjustable Knob  Allows you to adjust the angle of the light
   5  On/Off Switch  Press to turn the light on or off
   6  USB Power Socket  Connect to the Micro B USB charging cable and suitable    USB power source
   7  Battery Compartment  Insert 3 x AA alkaline batteries (not included) to power     the unit
   8  Suctio n Mount Clip  Allows you to lock the suction mount in p lace
   9  Suction Cup Mount  Unscrew the base stand to find the suction cup mount     for attaching to a window or glass
  10  Base Stand  2-in-1 base stand that also includes a suction cup mount     inside

Operation:

  1. Insert 3 x AA batteries (not included) in to the battery compartment located at the bottom of the mini disco ball.
  2. If you wish to power the unit permanently; you can connect the micro B USB power cable to the USB power socket of the mini disco ball. The opposite end of the USB charging cable needs to be plugged into a suitable SVDC USB mains power adaptor or a USB port of a computer or power bank.
  3. Alternatively you can connect a 12VDC mains power adaptor (not included) with a 2.5mm DC plug to power the unit. This is not required if you’re powering the unit by USB or batteries.
  4. Push the power switch to on in order for the mini disco ball to start working automatically.
    Note: The sound activation will work automatically once the mini disco ball hears music and will flash to the beat.
  5. You can unscrew the base of the unit if you wish to use the suction cup mount for attaching to glass or a window.

Specifications:

LED:                                3 x 1 W (RGB)
Battery Life:                     Up to 20 Hours
Batteries:                          3 x AA (Not Included)
Power:                             SVDC, SOOmA (Micro B USB) 12VDC, SOOmA (2.5mm DC)
Dimensions:                    1 SO(H) x 11 O(W) x 11 O(D)mm

 

 

Read More About This Manual & Download PDF:

Documents / Resources

DIGITECH Mini LED Disco Ball [pdf] User Manual
Mini LED Disco Ball, 3513

References

Leave a comment

Your email address will not be published. Required fields are marked *