DIG LEIT-1 MVA Solar Powered Irrigation Controller User Guide
A basic reference to get your timer up and running quickly
Installation Instructions
- Remove the LEIT-1™ from the box and place it in the sun to charge for approximately 2 hours or 3 to 4 hours if cloudy
- Install the LEIT-1™. (Reference manual)
- Test the LEIT-1™ by pressing the manual run
button.
Verify that the valve opens and the water flows. Press the button again. Verify that the valve closes, the water flow should stop.
- Use the
button to select the hour, minute, month, day and year; set using the 
and 
buttons.
- Program the LEIT-1™. (Reference manual)
To set SimpleSmart™ option see inside
Map And Description Table
Documents / Resources
 | DIG LEIT-1 MVA Solar Powered Irrigation Controller [pdf] User Guide LEIT-1, MVA Solar Powered Irrigation Controller |
