di-soric-LOGO

di-soric IRSD-35P Inductive Ring Sensor

di-soric-IRSD-35P-Inductive-Ring-Sensor-product

Specifications

  • Model: IRSD-35P-G3-B4
  • Type: Inductive ring sensor
  • Enclosure: Type 4X (indoor use only), 12, 13
  • Supply Class: 2 NFPA 79 Applications only
  • Service Voltage: 10 – 30 V DC
  • Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC
  • No-load Current: 30 mA (max)
  • Speed of Parts: 0.1 m/s (min) – 35 m/s (max)
  • Protection Type: IP 67
  • Ambient Temperature during Operation: Not specified

Product Usage Instructions

Safety Instructions:

General Safety Notice: WARNING! Not a safety component under 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!

Installation

  1. Ensure the power supply voltage is within the range of 10 – 30 V DC.
  2. Connect the sensor according to the switching output specifications provided.
  3. Mount the sensor in a suitable location where it can detect the desired parts effectively.

Operation

  1. Power on the sensor within the specified voltage range.
  2. Adjust the sensor settings if necessary based on the speed of the parts being detected.
  3. Observe the switching output behavior to ensure proper functioning.

DIMENSION

di-soric-IRSD-35P-Inductive-Ring-Sensor-figf-1

  1. Ring diameter
  2. sensitivity

Technical data

di-soric-IRSD-35P-Inductive-Ring-Sensor-figf-2

WIRING

di-soric-IRSD-35P-Inductive-Ring-Sensor-figf-4

  • BK: black
  • BN: brown
  • BU: blue
  • WH: white

Safety instructions

General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!

As of 05/17/24, subject to change

Enclosure Type 4X (indoor use only), 12, 13 Supply Class 2
NFPA 79 Applications only. For ad- apters providing field wiring I- ans refer to product information or customer support.

MORE INFORMATION

SCANNER

di-soric-IRSD-35P-Inductive-Ring-Sensor-figf-3

FAQ

  • Q: Can the inductive ring sensor be used outdoors?
    • A: No, the sensor is designed for indoor use only.
  • Q: What is the maximum speed of parts that the sensor can detect?
    • A: The sensor can detect parts moving at speeds up to 35 m/s.

Documents / Resources

di-soric IRSD-35P Inductive Ring Sensor [pdf] Owner's Manual
IRSD-35P-G3-B4, 213793, IRSD-35P Inductive Ring Sensor, IRSD-35P, Inductive Ring Sensor, Ring Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *