di-soric IRSD-15P-G3-B4 Inductive Ring Sensor
Specifications
- Internal Diameter: 15.1 mm
- Service Voltage: 10 – 30 V DC
- Switching Output: Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC
- No-load Current (max.): 30 mA
- Speed of Parts (min.): 0.1 m/s
- Speed of Parts (max.): 35 m/s
- Protection Type: IP 67
- Ambient Temperature during Operation: Not specified
Product Usage Instructions
Installation:
Ensure the sensor is mounted securely in the desired location with the specified internal diameter clearance. Connect the service voltage within the range of 10-30 V DC according to the provided wiring diagram.
Configuration:
Adjust the switching output settings based on your application requirements. Refer to the product information for detailed instructions on configuring the sensor for specific functions.
Operation:
Once installed and configured, the sensor will detect objects within the specified speed range and activate the switching output accordingly. Monitor the sensor’s performance during operation for any irregularities.
FAQ
Q: Is this sensor suitable for outdoor use?
A: No, this sensor is designated for indoor use only as indicated by its Enclosure Type 4X rating.
Q: What is the maximum current rating for the switching output?
A: The switching output can handle a maximum current of 100 mA.
Q: Can I adjust the sensitivity of the sensor?
A: Yes, you can adjust the sensor’s sensitivity by configuring the switching output settings based on your application needs.
DIMENSIONS
- Ring diameter
- sensitivity
WIRING
- BK: black
- BN: brown
- BU: blue
- WH: white
SPECIFICATION
- Technical data
+20°C, 24 V DC - Internal diameter
15,1 mm / 15.1 mm / 15,1 mm - Service voltage
10 … 30 V DC - Switching output
Gegentakt/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC / Push-pull/PNP/NPN, 100 mA, NO/NC - No-load current (max.)
30 mA - Speed of parts (min.)
0,1 m/s / 0.1 m/s / 0,1 m/s - Speed of parts (max.)
35 m/s - Protection type
IP 67 - Ambient temperature during operation
-25 … +70 °C
Safety instructions
General safety notice
WARNING! Not a safety component pursuant to 2006/42/EG and EN 61496-1/-2! May not be used for personal protection! Non-compliance can lead to death or serious injuries! Only use as directed!
CONTACT
DE-73660 Urbach
Germany
Tel: +49 (0) 7181/9879-0
info@di-soric.com ∙ www.di-soric.com
Stand 17.05.24, Änderungen vorbehalten As of 05/17/24, subject to change
État 17.05.24, sous réserve de modifications
Documents / Resources
 | di-soric IRSD-15P-G3-B4 Inductive Ring Sensor [pdf] Instruction Manual IRSD-15P-G3-B4, 213789, IRSD-15P-G3-B4 Inductive Ring Sensor, IRSD-15P-G3-B4, Inductive Ring Sensor, Ring Sensor, Sensor |