DESIGN ML-662 Anthracite Oak Look

Product Specifications

• Ax1
• Bx1
• Cx1
• Dx1
• Ex2
• Fx1
• Gx1
• Hx1
• Ix2
• Jx1
• Kx4
• Lx6
• Mx2
• Nx2
• Ox2
• Px4
• Qx6
• Rx16
• Sx10
• M4x10mm
• Tx9
• Ux30
• Vx2
• Wx4
• Xx4
• Yx1
• Zx1
• M4x14mm

Product Usage Instructions

Step 1
Assemble the following components:

• Bx1
• Cx1
• Dx1
• Lx6

Step 2
Follow these instructions:

• Bx1
• Sx2
• Rx4
• Jx1
• Ix2

Step 3
Proceed with the assembly by using:

• Bx1
• Ax1
• Ux2

Step 4
Continue with the assembly using:

• Dx1
• Cx1
• Ux4

Step 5
Assemble the following components:

• Ex2

Step 6

Progress with the assembly by adding:

• Fx1
• Tx9

Step 7

Next, add the following components:

• Kx4
• Hx1
• Gx1

Step 8
Continue with the following steps:

1. 1. Mx2 (Left)

2 (Right)

Step 9

Add the following components:

• Nx2
• Ox2
• Sx4
• Px4

Step 10

Frequently Asked Questions (FAQ)

Q: What should I do if I have leftover parts after assembly?
A: If you have extra parts after completing the assembly, refer back to the manual to ensure all steps were followed correctly. If you are still unsure, please contact customer support for assistance.

Installation

PARTS

NOTES: If you want to purchase the similar cube, use parts S,W,X.

Installation STEP

1. STEP 1
2. STEP 2
3. STEP 3
4. STEP4
5. STEP5
6. STEP 6
7. STEP 7
8. STEP 8
9. STEP9
10. STEP10
11. STEP11

Documents / Resources

DESIGN ML-662 Anthracite Oak Look [pdf] Installation Guide ML-662, ML-664, ML-666, 1131, ML-662 Anthracite Oak Look, ML-662, Anthracite Oak Look, Oak Look, Look

References

• User Manual