Alienware Aurora R8 Setup and Specifications
Set up your computer
- Connect the keyboard and mouse.
- Connect to your network using a cable, or connect to a wireless network.
- Connect the display.
NOTE: If you ordered your computer with a discrete graphics card, the HDMI and the display ports on the back panel of your computer are covered. Connect the display to the discrete graphics card.
NOTE: If you have two graphics cards, the card installed in PCI Express X16 (graphics slot 1) is the primary graphics card.
- Connect the power cable.
- Press the power button.
- Create recovery drive for Windows.
NOTE: It is recommended to create a recovery drive to troubleshoot and fiÚ problems that may occur with Windows.
For more information, see Create a USB recovery drive for Windows.
Create a USB recovery drive for Windows
Create a recovery drive to troubleshoot and fiÚ problems that may occur with Windows. An empty USB floÁ’ drive with a minimum capacity of 16 GB is required to create the recovery drive. NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions.
- Connect the USB floÁ’ drive to your computer.
- In Windows search, type Recovery.
- In the search results, click Create a recovery drive.
The User Account Control window is displayed. - Click Yes to continue.
The Recovery Drive window is displayed. - Select Back up system file to the recovery drive and click Next.
- Select the USB flash drive and click Next.
A message appears, indicating that all data in the USB floÁ’ drive will be deleted. - Click Create.
- Click Finish.
For more information about reinstalling Windows using the USB recovery drive, see the Troubleshooting section of your product’s Service Manual at www.dell.com/support/manuals.
Setting up the Virtual Reality (VR) headset — optional
NOTE: The VR headset is sold separately.
- Download and run the setup tools for your VR headset at www.dell.com/VRsupport.
- Connect the VR headset to the USB 3.1 Gen 1 and HDMI ports on your computer, when prompted.
NOTE: Connect the headset to the HDMI port on the primary graphics card and connect the display to any available port on the card.
- Follow the instructions on the screen to complete the setup.
Views of Alienware Aurora R8
Front
- USB 3.1 Gen 1 ports (2)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. - Headphone port
Connect a headphone or speakers. - Microphone port
Connect an external microphone to provide sound input. - USB 3.1 Gen 1 Type-C port
Connect to external storage devices. Provides data transfer speeds up to 5 Gbps.NOTE: This port does not support video/audio streaming or power delivery.
- USB 3.1 Gen 1 port
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. - Optical-drive eject button
Press to open the optical drive tray. - Optical drive (optional)
Reads from and writes to CDs, DVDs, and Blu‑ray discs. - Power button (AlienHead)
Press to turn on the computer if it is turned ¯äĘ in sleep state, or in hibernate state.
Press to put the computer in sleep state if it is turned on.
Press and hold for 4 seconds to force shut-down the computer.
NOTE: You can customize the power-button behavior in Power Options.
Back
- Back panel
Connect USB, audio, video, and other devices. - PCI-Express X16 (graphics slot 1)
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your computer.
For optimal graphics performance, use a PCI-Express X16 slot for connecting the graphics card.NOTE: The PCI-Express X16 slot works at X8 speed only.
NOTE: If you have two graphics cards, the card installed in PCI Express X16 (graphics slot 1) is the primary
graphics card. - PCI-Express X4 slots (2)
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your computer. - PCI-Express X16 (graphics slot 2)
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your computer.
For optimal graphics performance, use a PCI-Express X16 slot for connecting the graphics card.NOTE: The PCI-Express X16 slot works at X8 speed only.
- Power-supply cage release-latches (2)
Allows you to remove the power supply unit from your computer. - Power-supply diagnostics button
Press to check the power‑supply state. - Power-supply diagnostics light
Indicates the power-supply state. - Power port
Connect a power cable to provide power to your computer. - Service Tag label
The Service Tag is a unique alphanumeric identfier that enables Dell service technicians to identify the hardware components in your computer and access warranty information. - Side panel release latch
Allows you to remove the side panel from your computer. - Security-cable slot (for Kensington locks)
Connect a security cable to prevent unauthorized movement of your computer.
Back panel
- Hard-drive activity light
Turns on when the computer reads from or writes to the hard drive. - Optical S/PDIF port
Connect an omº¢fi…½Ę speakers, or a TV for digital audio output through an optical cable. - USB 2.0 ports (5)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 480 Mbps. - Display Port
Connect an external display or a projector.
NOTE: The DisplayPort on the back panel of your computer is covered. Connect the display to the discrete graphics card of your computer. - USB 3.1 Gen 2 Type-C port
Connect peripherals, such as external storage devices and printers. Provides data transfer speeds up to 10 Gbps.
NOTE: This port does not support video/audio streaming or power delivery. - USB 3.1 Gen 2 port
Connect peripherals, such as external storage devices and printers. Provides data transfer speeds up to 10 Gbps. - Side L/R surround port
Connect audio-output devices such as speakers and omº¢fi…½Áĝ In a 7.1 speaker channel setup, connect the side-left and side-right speakers. - Microphone port
Connect an external microphone to provide sound input. - Front L/R surround line-out port
Connect audio-output devices such as speakers and omº¢fi…½Áĝ In a 2.1 speaker channel setup, connect the left and right
speakers. In a 5.1 or a 7.1 speaker channel setup, connect the front-left and front-right speakers. - Line-in port
Connect recording or playback devices such as a microphone or CD player. - Center/subwoofer LFE surround port
Connect the center speaker or the subwoofer.NOTE: For more information about the speaker setup, refer the documentation that shipped with the speakers.
- Rear L/R surround port
Connect audio-output devices such as speakers and omº¢fi…½Áĝ In a 5.1 or a 7.1 speaker channel setup, connect the rearleft and rear-right speakers. - USB 3.1 Gen 1 ports (3)
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps. - Network port (with lights)
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.
The two lights next to the connector indicate the connectivity status and network activity. - Coaxial S/PDIF port
Connect an omº¢fi…½Ę speakers, or a TV for digital audio output through a coaxial cable.
Specifications of Alienware Aurora R8
Dimensions and weight
Table 1. Dimensions and weight
Description: Values
Height:
Front: 422.8 mm (16.65 in.)
Rear: 472.5 mm (18.60 in.)
Width: 212 mm (8.34 in.)
Depth: 360.50 mm (14.19 in.)
Weight (maximum): 14.82 kg (32.67 lb) NOTE: The weight of your computer depends on the configuration ordered and the manufacturing variability.
Processors
Table 2. Processor specificatoins
Description: Values
Processor: 8th Generation Intel Core i3/i5/i7 & 9th Generation Intel Core i5k/i7k/i9k
Wattage: 65W & 95W
Core count: 2/4/4 & 6/8/8
Thread count 6/8/8 & 6/8/16
Speed: Up to 3.40 GHz/3.90 GHz/4.6 GHz Turbo Boost & Up to 4.6 GHz/4.9 GHz/5.0 GHz Turbo Boost
Intel Smart Cache: 4 MB/6 MB/8 MB & 9 MB/12 MB/16 MB
Integrated graphics: Intel UHD Graphics 620 & Intel UHD Graphics 630
Chipset
Table 3. Chipset specifications
Description: Values
Chipset: Intel Z370 chipset
Processor: 8th Generation Intel Core i3/i5/i7 & 9th Generation Intel Core i5k/i7k/i9k
DRAM bus width: Not supported
Flash EPROM: 16 MB
PCIe bus: PCIe Gen3
External bus frequency PCIe Gen3x:4
Operating system
- Windows 10 Home (64-bit)
- Windows 10 Professional (64-bit)
Memory
Table 4. Memory specifications
Description: Values
Slots: Four DIMM sockets
Type: DDR4
Speed:
* 2666 MHz
* Up to HyperX FURY DDR4 XMP at 3200 MHz
Maximum memory 64 GB
Minimum memory 4 GB
Memory per slot 4 GB, 8 GB, and 16 GB
Configurations supported:
* 8 GB DDR4 at 2666 MHz
* 16 GB DDR4 at 2666 MHz
* 32 GB DDR4 at 2666 MHz
* 64 GB DDR4 at 2666 MHz
* 8 GB XMP at 2933 MHz
* 16 GB XMP at 2933 MHz
* 32 GB XMP at 2933 MHz
* 64 GB XMP at 2933 MHz
* 16 GB XMP at 3200 MHz
* 32 GB XMP at 3200 MHz
* 64 GB XMP at 3200 MHz
Intel Optane memory
Intel Optane memory functions only as a storage accelerator. It neither replaces nor adds to the memory (RAM) installed on your computer. NOTE: Intel Optane memory is supported on computers that meet the following requirements:
- 7th Generation or higher Intel Core i3/i5/i7 processor
- Windows 10 64-bit version or higher
- Intel Rapid Storage Technology driver version 15.9.1.1018 or higher
Table 5. Intel Optane memory specifictions
Description: Values
Type: Storage accelarator
Interface: PCIe 3.0×4
Connector: M.2 2280
Configurations supported: 16 GB and 32 GB
Capacity: Up to 32 GB
Ports and connectors
Table 6. External ports and connectors specifications
Description: Values
Front:
USB:
* Three USB 3.1 Gen 1 ports
* One USB 3.1 Gen 1 Type-C port
Audio:
* One audio output/headphone port (supports 2 channel audio)
* One audio input/microphone port
Back:
Network: One RJ-45 port
USB:
* Five USB 2.0 ports
* Three USB 3.1 Gen 1 ports
* One USB 3.1 Gen 2 port
* One USB 3.1 Gen 2 Type-C port
Audio:
* One audio input/microphone port
* One optical S/PDIF port
* One coaxial S/PDIF port
* One front L/R surround line-out port
* One side L/R surround port
* One rear L/R surround port
* One center/subwoofer LFE surround port
* One line-in port
Video: One DisplayPort – optionalNOTE: The DisplayPort on the back panel of your computer is covered. Connect the display to the discrete graphics card of your computer.
Media-cardreader: Not supported
Poweradapterport: Not supported
Security: Kensington locks
Legacyports: Not supported
Table 7. Internal ports and connectors specifications
Description: Values
Expansion:
* Two PCIe x16 slots
* Two PCIe x4 slots
M.2:
* One M.2 slot for Wi-Fi and Bluetooth combo card
* One PCIe/SATA M.2 2280 slots for solid-state drive
Communications
Ethernet
Table 8. Ethernet specifications
Description: Values
Model number: Killer E2500 Ethernet controller integrated on system board
Transfer rate: 10/100/1000 Mbps
Wireless module
Table 9. Wireless module specifictions
Description: Values
Model number: QCA9377 (DW1810) & QCA61x4A (DW1820) & Rivet 1535 (Killer)
Transfer rate: 433 Mbps & Up to 867 Mbps & Up to 867 Mbps (1.867 Gbps with Doubleshot Pro technology)
Frequency bands supported: Dual band 2.4 GHz/5 GHz & Dual band 2.4 GHz/5 GHz & Dual band 2.4 GHz/5 GHz
Wireless standards: WiFi 802.11ac & WiFi 802.11a/b/g/n/ac & WiFi 802.11a/b/g/n/ac
Encryption:
* 64-bit and 128-bit WEP
* CKIP
* TKIP
* AES-CCMP
&
* 64-bit and 128-bit WEP
* CKIP
* TKIP
* AES-CCMP
&
* 64-bit and 128-bit WEP
* CKIP
* TKIP
* AES-CCMP
Bluetooth: Bluetooth 4.1 & Bluetooth 4.1 & Bluetooth 4.2
Video
Table 10. Discrete graphics specifications
Discrete graphics
Controller: External display support: Memory size: Memory type
NVIDIA GeForce RTX 2080: One HDMI port and one DisplayPort: 8 GB: GDDR6
NVIDIA GeForce RTX 2080 Ti: One HDMI port and one DisplayPort: 11 GB: GDDR6
Table 11. Integrated graphics specifictions
Controller: External display support: Memory size: Processor
Intel UHD Graphics 620: One DisplayPort: Shared system memory: 8th Generation Intel Core i3/i5/i7 NOTE: Use discrete card output for best performance.
Intel UHD Graphics 630: One DisplayPort: Shared system memory: 9th Generation Intel Core i5k/i7k/i9k NOTE: Use discrete card output for best performance.
Audio
Table 12. Audio specifications
Description: Values
Type: Integrated 7.1 channel audio with S/PDIF support
Controller: Realtek ALC3861
Internal interface: High-definition audio
External interface: 7.1 channel output, microphone-in, stereo headphones, and headset combo connector
Storage
Your computer supports one of the following specification:
- One U.2 drive and two 2.5-inch hard drives
- One M.2 2242/2260/2280 solid-state drive, one 3.5-inch hard drive, and two 2.5-inch hard drives
- One 3.5-inch hard drive and two 2.5-inch hard drives
NOTE: The primary drive of your computer varies depending on the storage configuration.
For computers:
- with a U.2 drive, the U.2 drive is the primary drive
- with an M.2 drive, the M.2 drive is the primary drive.
- without both U.2 drive and M.2 drive, the 3.5-inch drive is the primary drive.
Table 13. Storage specifications
Storage type: Interface type: Capacity
Two 2.5-inch hard drives: SATA AHCI 6 Gbps: Up to 2 TB
One 3.5-inch hard drive: SATA AHCI 6 Gbps: Up to 1 TB
Two M.2 2242/2260/2280 solid-state drives:
* SATA AHCI 6 Gbps
* PCIe NVMe up to 32 Gbps: Up to 1 TB
One U.2 drive: PCIe NVMe up to 32 Gbps (U.2 drive): Up to 280 GB
One 9.5 mm slim drive for DVD+/-RW drive or Blueray Disc.: SATA 1.5 Gbps: Not applicable
Power ratings
Table 14. Power ratings
Description: Values
Input voltage: 100 VAC to 240 VAC
Input frequency: 50 Hz to 60 Hz
Temperature range:
Operating: 5°C to 50°C (41°F to 122°F)
Storage: -40°C to 70°C (-40°F to 158°F)
Type 460 W 850 W
Input current (maximum) 8 A 10 A
Output current (continuous) 3.3V/17A, 5V/25A, 12VA/18A, 12VB/16A, 12VC/8A, 5Vaux/3A & 3.3V/20A, 5V/20A, 12VA/32A, 12VB/ 48A, 12VD/16A, -12V/0.5A, 5Vaux/4A
Rated output voltage 3.3V, 5V, 12VA, 12VB, 12VC, 5Vaux & 3.3V, 5V, 12VA, 12VB, 12VD, -12V, 5Vaux
Computer environment
Airborne contaminant level: Gl as defined by ISA-S71.04-1985
Table 15. Computer environment.
: Operating : Storage
Temperature range: 5°C to 35°C (41°F to 95°F): –40°C to 65°C ( 40°F to 149°F)
Relative humidity (maximum): 10% to 90% (non-condensing) 0% to 95% (non-condensing)
Vibration (maximum): 0.26 GRMS 1.30 GRMS
Shock (maximum): 40 G for 2 ms with a change in velocity of 20 in/s (51 cm/s)†: 105 G for 2 ms with a change in velocity of 52.5 in/s (133 cm/s)‡
Altitude (maximum): –15.2 m to 3,048 m (–50 ft to 10,000 ft): –15.2 m to 10,668 m (–50 ft to 35,000 ft)
* Measured using a random vibration spectrum that simulates user environment.
† Measured using a 2 ms half-sine pulse when the hard drive is in use.
‡ Measured using a 2 ms half-sine pulse when the hard-drive head is in parked position.
Getting help and contacting Alienware
Self-help resources
You can get information and help on Alienware products and services using these online self-help resources:
Table 16. Alienware products and online self-help resources
Self-help resources: Resource location
Information about Alienware products and services: www.alienware.com
Tips:
Contact Support: In Windows search, type Contact Support, and press Enter.
Online help for operating system: www.dell.com/support/windows
www.dell.com/support/linux
Troubleshooting information, user manuals, setup instructions, product specifications, technical help blogs, drivers, software updates, and so on: www.alienware.com/gamingservices
VR Support: www.dell.com/VRsupport
Videos providing step-by-step instructions to service your computer: www.youtube.com/alienwareservices
Contacting Alienware
To contact Alienware for sales, technical support, or customer service issues, see www.alienware.com. NOTE: Availability varies by country and product, and some services may not be available in your country.
NOTE: If you do not have an active Internet connection, you can fi© contact information about your purchase invoice, packing slip, bill, or Dell product catalog.
Alienware Aurora R8 Setup and Specifications Manual – Optimized PDF
Alienware Aurora R8 Setup and Specifications Manual – Original PDF