ZEEMR ZMLE3020 Projector Instructions
Brand: ZEEMR
Model: ZMLE3020
Safety Precautions
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Product Components
The package includes the following components:
- Projector Unit
- Power Adapter
- Remote Control
- User Manual
[Illustration of projector unit, power adapter, and remote control]
Remote Control Description
[Diagram showing the remote control with labeled buttons]
- Power Button: Turns the projector on/off.
- Navigation Buttons: Navigate through menus.
- OK Button: Confirms selection.
- Menu Button: Opens the main menu.
- Volume Up/Down: Adjusts audio volume.
- Source Button: Selects the input source.
- Back Button: Returns to the previous screen.
- Home Button: Returns to the home screen.
Technical Specifications
| Parameter | Specification |
|---|---|
| Resolution | 1920 x 1080 (Native) |
| Brightness | 800 ANSI Lumens |
| Contrast Ratio | 1000:1 |
| Lamp Life | 30,000 Hours |
| Projection Size | 40-150 inches |
| Input Ports | HDMI, USB, AV |
| Connectivity | Wi-Fi, Bluetooth |
Setup and Operation
Connecting to Power
Connect the power adapter to the projector and then to a power outlet.
Selecting Input Source
Press the 'Source' button on the remote control or the projector to cycle through available input sources (HDMI, USB, AV, Wireless).
Focus and Keystone Adjustment
Use the focus ring on the projector to sharpen the image. Adjust the keystone correction to ensure a rectangular image if the projector is not placed perpendicular to the screen.
Bluetooth Connection
Navigate to the settings menu, select Bluetooth, and pair your device.
Wireless Projection
Ensure your device is connected to the same Wi-Fi network as the projector. Use the screen mirroring function on your device.
Troubleshooting
No Image: Ensure the projector is powered on and the correct input source is selected.
Blurry Image: Adjust the focus ring.
No Sound: Check the volume level and ensure the audio output is correctly configured.
Maintenance
Keep the lens clean using a soft, dry cloth. Ensure ventilation openings are clear of dust.
Warranty Information
Refer to the warranty card included in the package for detailed information.
FCC Compliance Details
This section reiterates the FCC compliance statement as detailed in the safety precautions.
