Trying to configure the Router? | TP-Link
CE Regulatory Compliance | TP-LinkTP-Link Product Support - Wireless Networking Equipment SupportRegulatory Compliance | TP-Link
Installation Guide for tp-link models including: Archer C24, AC750 Dual Band Wi-Fi Router, AC750, Dual Band Wi-Fi Router, Band Wi-Fi Router, Wi-Fi Router, Router
11 juin 2024 — a. Place the router next to your host router and power it on. b. Connect a computer to the router via an Ethernet cable or wirelessly by.
Download für Archer C24 | TP-Link Deutschland
File Info : application/pdf, 2 Pages, 299.76KB
DocumentDocumentQuick Installation Guide AC750 Dual Band Wi-Fi Router *Images may differ from the actual product. If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL / Cable / Satellite modem, connect the Ethernet cable to the router's WAN port, then follow step 4 and 5 to complete the hardware connection. Power adapter Connect the power adapter to the router. Verify that the LED turns solid on before continuing with the configuration. Router Configure the router 1. Connect your computer to the router (Wired or Wireless) Wired Turn off the Wi-Fi on your computer and connect it to the router via an Ethernet cable. Wireless Connect your device to the router's Wi-Fi using the SSID (network name) and Wireless Password printed on the label at the bottom of the router. Wireless Password/PIN:XXXXXXXX SSID:TP-Link_XXXX SSID:TP-Link_XXXX_5G 2. Launch a web browser, and enter http://tplinkwifi.net or http://192.168.0.1 in the address bar. Create a password to log in. Note: If the login window does not appear, please refer to FAQ > Q1. http://tplinkwifi.net New Password: Confirm Password: Let's Get Started Important Power off the modem, and remove the backup battery if it has one. Turn on the modem and then wait about 2 minutes for it to restart. Modem Connect to the internet Connect to the power socket Connect the powered-off modem to the router's WAN port via an Ethernet cable. 3. Follow the step-by-step instructions to set up the internet connection. Note: If you are not sure of the Connection Type, please click AUTO DETECT or contact your ISP (Internet Service Provider) for help. Tether App The TP-Link Tether app provides a simple, intuitive way to access and manage your router. Scan the QR code to download Tether from the Apple App Store or Google Play. Access Point Mode In this mode, the router transforms your existing wired network to a wireless one. Internet Ethernet1Ethernet2 Ethernet3Ethernet4 Ethernet Wired Router WAN Router Devices a. Power on the router. b. Connect the router's WAN port to your wired router's Ethernet port via an Ethernet cable as shown above. c. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password printed on the label at the bottom of the router. d. Launch a web browser and enter http://tplinkwifi.net in the address bar. Create a password to log in. e. Click Change Mode in the top right corner and select Access Point Mode. Wait for the router to reboot. Note: You can also go to Advanced > Operation Mode to switch to Access Point Mode. f. Use http://tplinkwifi.net to log in to the web management page and follow the step-by-step instructions to set up the internet connection. Range Extender Mode In this mode, the router boosts the existing wireless coverage in your home. 1. Configure a. Place the router next to your host router and power it on. b. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and Wireless Password printed on the label at the bottom of the router. c. Launch a web browser and enter http://tplinkwifi.net in the address bar. Create a password to log in. d. Click Change Mode in the top right corner and select Range Extender Mode. Wait for the router to reboot. Note: You can also go to Advanced > Operation Mode to switch to Range Extender Mode. e. Use http://tplinkwifi.net to log in to the web management page and follow the step-by-step instructions to set up the internet connection. 2. Relocate Place the router about halfway between your host router and the Wi-Fi "dead" zone. The location you choose must be within the range of your existing host network. Host Router Host Network Router Extended Network Devices Appearance Item Description Power Green Solid on: Power is on. Blinking slowly: The system is starting up or firmware upgrade is in progress. Blinking quickly: WPS connection is in progress. 2.4GHz Green Solid on: The 2.4GHz wireless band is enabled. 5GHz Green Solid on: The 5GHz wireless band is enabled. LAN Green Solid on: At least one LAN port is connected. Solid on: Orange Router Mode: The WAN port is connected, but internet is not available. Internet Green Solid on: Router Mode: Internet is available. Access Point Mode: The WAN port is connected. Range Extender Mode: The router is connected to the host network. Press for 1 second to enable the WPS function. WPS/RESET Button Press and hold the button until all LEDs turn off to reset the router to its factory default settings. FAQ (Frequently Asked Questions) Q1. What can I do if the login window does not appear? Reboot your router and try again. If the computer is set to a static IP address, change its settings to obtain an IP address and DNS server address automatically. Verify that http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web browser. Alternatively, enter http://192.168.1.1 in the web browser and press Enter. Use another web browser and try again. Disable and then enable the network adapter being used. Q2. What can I do if I cannot access the internet when in Router mode? Reboot your modem and router, then try again. Check if the internet is working normally by connecting a computer directly to the modem using an Ethernet cable. If it is not, contact your Internet Service Provider. Log in to the web management page of the router, and go to the Network Map page to check whether the WAN IP address is valid or not. If it is not, check the hardware connection or contact your internet service provider. For cable modem users, log in to the web management page of the router. Go to Advanced > Network > Internet and locate the MAC Clone section. Select Clone Current Device MAC, and click SAVE. Then reboot both the modem and the router. Q3. How do I restore the router to its factory default settings? With the router powered on, press and hold the WPS/RESET button on the back panel of the router until all LEDs turn off. The router will reboot. Log in to the web management page of the router. Go to Advanced > System > Backup & Restore (or System>Backup & Restore in Access Point Mode or Range Extender Mode), and locate the Factory Default Restore section. Then Click FACTORY RESTORE. The router will restore and reboot automatically. Q4. What can I do if I forgot my web management password? Refer to FAQ > Q3 to reset the router, then create a password to log in. Q5. What can I do if I forgot my wireless network password? The factory default wireless password is printed on the label of the router. Connect a computer directly to the router using an Ethernet cable. Log in to the router's web management page, and go to Wireless to obtain or reset your wireless password. Safety Information Keep the device away from water, fire, humidity or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Do not use the device where wireless devices are not allowed. Adapter shall be installed near the equipment and shall be easily accessible. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/ For technical support, the user guide and more information, please visit https://www.tp-link.com/support/, or simply scan the QR code. ©2024 TP-Link 7106511228 REV1.0.1