Installation Guide for Sunco Lighting models including: U15-8HYBRID, U15-8HYBRID T8 U Shaped LED Tube, U15-8HYBRID, T8 U Shaped LED Tube, U Shaped LED Tube, LED Tube
Installation Guides, Manuals, and Specs | Sunco – Sunco Lighting
CEC Title 20 and Title 24 Efficiency Regulations – Sunco Lighting
File Info : application/pdf, 2 Pages, 1.07MB
DocumentDocumentLINEAR LED TUBES TONE-SELECTTM U15/8" HYBRID The LED T8 Hybrid tubes deliver outstanding lighting while cutting energy use and maintenance costs. Designed to work with or without a ballast, these versatile tubes are a top-tier replacement for standard fluorescent lamps, offering seamless compatibility and enhanced efficiency. PLUG & GOTM OR SINGLE/DOUBLE ENDED DIRECT WIRE · Use with an instant start ballast for a direct replacement, or easily rewire for the lamp to operate directly off the main power supply. · Exceptional efficacy · 50,000-hour lifespan reduces replacements and labor costs. · Tubes will work with shunted and non-shunted sockets (See install instructions for more details.) Electrical Wattage Voltage 13W 120-277V Optical Efficiency (LPW) CCT (Selectable) Beam Angle Up to 123 3500K / 4000K / 5000K 140° Environment Operating Temperature Suitable Location IP Rating Fixture Rating Emergency Lighting -4°F ~ 113°F Damp IP20 Open or Enclosed No Construction Housing Lens Base / Power Supply Glass / Plastic End Caps Frosted Medium Bi Pin (G13) Warranty (Complete terms can be found on our website.) Standard 5-year Listings U.S. & CANADA UL TYPE A & B CCT SELECTABLE Specifications may change without prior notice. Photos are for general reference only. Rev: 01/28/2025 · Page 1 LINEAR LED TUBES TONE-SELECTTM U15/8" HYBRID PERFORMANCE DATA LAMP SYSTEM WATTAGE WATTAGE 13W 15.5W 3500K 1900 LUMENS 4000K 1975 5000K 1950 LPW 123 UL TYPE A & B POWER CRI CURRENT THD FACTOR 83 120mA 0.9 20 DIMENSIONS L SIZE Length (L) 22.4" D Diameter (D) 1" US & CANADA Note: In direct wire application; shunted sockets use double ended wiring only and non-shunted can use either single or double ended wiring. Please refer to install instructions for further details. · Visit www.designlights.org/qpl to confirm qualification. · DLC lists the wattage of the system power. Published lumen values are approximate and may vary slightly. Specifications may change without prior notice. Photos are for general reference only. Rev: 01/28/2025 · Page 2